Volvo - C70 :: 2004 - Need To Replace Timing Belt
Mar 10, 2013
I purchased a 2004 volvo c-70 with 35K miles.The manual says to replace the timing belt at 100k or 10 years.With such low miles do I need to replace it in 2014?
View 6 RepliesI purchased a 2004 volvo c-70 with 35K miles.The manual says to replace the timing belt at 100k or 10 years.With such low miles do I need to replace it in 2014?
View 6 RepliesI was just curious and bored this morning. So I wanted to ask you all what mileage did you replace your timing belt at?
View 24 RepliesOf those out there whose Timing Belts HAVE failed , at what mileage have they gone bad and what damage was done?. This would be good to know to give an idea as to when to replace the Timing Belt.
View 12 RepliesWe just bought a 1995 Toyota 4Runner that has 195,000 miles. We bought it for a 4wd vehicle to take over the passes and go hunting, but we have been driving it regularly because we like it. I read in the manual that under heavy idling conditions the timing belt should be changed every 60,000 miles but it does not say for regular driving. The previous owners had work done on the timing belt at 96,000 miles.
View 2 RepliesI have a 2003 Subaru Forester with 44,000 miles. How will I know when to replace the timing belt? Is it more a question of miles or age?
View 7 RepliesI have a 2009 Elantra (automatic) that already has 52K miles on it. I drive a lot mostly at highway speeds. I know several people who recommend having the timing belt replaced BEFORE the warranty runs out at 60K miles.
The dealership has a 60K inspection where they "inspect" the timing belt (plus a whole lot of "fluff" checks, tire rotation etc) I'd rather just take it in and get it replaced. What should a timing belt replacement cost?
Our pilot is 8 years old but has only 64, 000 miles on it. The dealership is recommending we change motor mounts and timing belt. Although the motor mounts don't seem to be broken and nothing is rattling we have to change the motor mounts due to the fact that the engine is moving more than an inch. Having said that in 6 months we have to put the pilot in long term storage for 3 years. Should we change the timing belt now given the low mileage and the long term storage situation?
View 11 RepliesSix months ago my 2005 Honda Pilot got a new timing belt that was incorrectly calibrated. When the Honda Dealer test drove the car, they damaged the values. They fixed the valve damage and gave me a discount on the timing belt. I considered selling the car, but decided to keep it.
Now it's six months later. When driving I hear a "clicking noise". The dealer says that the timing belt tensioner needs to be replaced and that it would be dangerous to drive it at high speed as it is now. The clicking is caused by a worn ??? tensioner.
They claim that the incorrectly calibrated timing belt could not have caused this problem with the tensioner.
I am acquiring a 1991 Volvo 740 Turbo and am concerned about the need to change the timing belt. The seller does not have record of it being changed since he had the car for two years. He had only put about 10,000 miles on it since he had acquired it. It now has 186,000 miles and runs perfect and basically in good shape for its age. If the belt breaks does it ruin the engine?
View 2 RepliesI recently bought a 97 960. i have had a s90 before in totaled it i loved the car so much i found another. i was driving and broke the timing belt tensioner which in turn lead to the breaking of 5 exhaust valves that i know of. I've taken off the head and noticed that one of the bottom of the valves had melted onto the number 5 piston head.
I called around and search but every motor is at least 1000 and i have been told anywhere from 3500-4500 to rebuild. My question would b is there an easy way to fix or should i junk it. i bought it for a 1000 it has only 140000 on it an its in almost great condition. I attached some pictures of the head and piston so u can see the damage.
Attached File(s)
2012_04_07_19.02.39.jpg ( 1.45MB )
2012_04_10_16.45.26__1_.jpg ( 1.43MB )
2001 volvo s40. Diagnostics performed. Error codes for the timing belt and temperature sensor. These were replaced. The check engine light still comes on/stays on.
View 6 RepliesI'm told by my dealer that I must replace the timing chain by 100,000 miles. I've also been told by others who've driven multiple vehicles over 250K miles that they've never replaced a timing chain on any of their vehicles. Who's right in this case?
View 9 RepliesI was thinking about checking out the above vehicle at my local dealer (Chevrolet). They're asking 15.9k and it has 57k miles. I need to know if it has a timing belt or a timing chain and how reliable is the engine/transmission.
View 1 RepliesI was told by VW service that my timing belt is loose and needs to be changed. Is it possible to know that without taking things apart? The belt was changed at 80k miles. The vehicle is at 132k miles now. Its a 2004 v8. the quote is $1400 which I suppose is in line with what these cost but I'm wondering if I can wait until 160K before changing it.
View 9 RepliesI was wondering if the timing belt on my 05 RX 330 needed to be changed due to age and not miles. The car only has 72k miles on it but it is 10 years old.
View 5 Repliesis the timing belt the same for the 2004.5 and the 2005 gli?
View 1 RepliesAfter timing belt change code P0016 with Check engine light trac off and VSC light on.
Put on the entire kit...timing belt,tensioner, idler, and water pump. When I took it apart to put the new cam crank sensor I inspected everything and all looked good.
Changed the sensor and reset code, a few hours later back on. Car seems to run fine. I didn't think the sensor was bad. Car was running great...just due for timing belt.
I have a GX470 and just had the timing belt replaced. Now my "airbag light" stays on all the time.
View 12 RepliesRecently I changed the timing belt on a 2004 Passat 1.8T and I realized I put the timing tensioner off by a few millimeters due to misunderstanding. I started the engine and it didn't sound very healthy. So I took off the timing belt and realized the tensioner was off by 8 millimeters. I corrected it and restarted the engine and it began back-firing. I re-checked and replaced the belt 3 more times and it still back-fired. The engine runs perfectly from a few seconds to a few minutes, then begins back firing and it stalls out. I had a recent post and I had suggestions to check all hoses, connections, etc. and to scan the computer for error codes. I did so and got the codes P0300, P0302, P0303, P0304. These codes mean back-fire in cylinders 2-4. I don't see any valve adjustments in the engine so could the valves be bent and do I have to replace them? God forbid D: Or do I have to reset some kind of computer code in the car or any other error that may need adjusting? All connections, hoses, wires, etc. are good. I've been a professional mechanic/technician for 25 years now and fixed cranes, bulldozers, semi-trucks, and anything else you can name that has wheels and is land based, all sorts of engines, gas, diesel, ethanol, you name it... I also worked on several VW's, including my own, and figured this V-Dub would be a walk in the park , but it turns out this Passat is the most complicated thing I've worked on in my life!
View 8 RepliesI have 2004 Chrysler Sebring base model 4 cylinder with 90,000 miles. Paid off long ago. The schedule says its time to change the timing belt but no symptoms. No other issues and have kept up the maintenance. The cost is around $1000. I need the car to last 2 more years until our new car is paid off. Should I do the repair or play the odds that it won't break down?
View 19 RepliesThe timing belt on my 2004 Chevy Aveo broke last week. I have it at a mechanic who got a new timing belt on to check the compression of the engine. Bad news: no compression. So far they haven't taken the head off to inspect the inside. This includes timing belt/water pump, cylinder head gasket removal and replacement, cylinder head check, some misc labor, lube, oil, and filter...
However, another mechanic is suggesting that I replace the engine instead with a used or refurbished engine with less miles. He says that it doesn't make much sense to put new parts on the top end of the engine. The engine itself has about 153k miles on it.