We religiously wear seat belts on the road. BUT, on my 4WD Tacoma, driving around a farm they are not needed. Can you simply unplug the underseat sensor to defeat the annoying chime and yet not disable the airbag system?
View 3 RepliesWant to stop this chime via VCDS, but leave the cluster icon on, if possible. I found something on Ross-Tech's website, but it doesn't seem to apply to our cars specifically, or does it? Like, specifically the way I want it (chime down, icon stays) with success, and can walk me through it?
This is off RT's site: [URL] ....
I'm in the habit of starting the car andthen putting on my seat belt while it is warming up.So I used the Carista OBD2 app to disable the seat belt chime on my 2015 Camry. This is supposed to be the same as doing it from Techstream, I believe.But the ding still sounds several times once I turn the key. The seat belt warning light also flashes in synch with the dings.I confirmed the settings:
Seat belt warning ding (driver)
ENABLED / *DISABLED*
Seat belt warning ding (front passenger)
ENABLED / *DISABLED*
How to disable the belt minder chime on a 2015 SD? I tried unplugging the harness under the seat, but it turns on the airbag light. No instructions in the owner's manual like there was for my 2005.
View 8 RepliesAbout 6 weeks ago my 2004 4.6 scab had a glitch in that when you got going the seat belt warning chimes came on, to clear it stop at the next junction turn off re start and away you go. Now today its moved a step further on, the airbag not working light flashes and then stops on, but no seat belt chimes?
View 2 RepliesI noticed the passenger side on/off switch for the airbag doesn't illuminate anymore on my 98 Ranger. Whether I turn the key on the switch to on or off it doesn't illuminate either way. The airbag light on the dash flashes showing, counting a code 27 and then it stays on. I also noticed the seat belts on symbol doesn't illuminate and in the owner's manual it says it should illuminate and chime. I remember it use to illuminate but I don't remember a chime.
Someone with a 98 that has a seat belt reminder light that illuminates and chimes until you fasten the seat belt? I don't know if that and the airbag code is related. But I want to fix both? I guess the simplest one to tackle first would be the seat belt light/chime. I don't see a fuse for it. I guess I need to know first is it really suppose to chime.
Is it possible to turn off the seat belt chime? If so how?
View 11 RepliesNeed to eliminate my seat belt chime and if you know how I could get it done.
View 5 RepliesI would love to find a way to turn off the seat belt chime off. Also would love to have the radio skip the accept screen.
View 2 RepliesWhen I purchased my new 2008 RX 350 I was able to turn off the seat belt chime using a hack. I recently purchased a 2015 RX 350 and have tried to do the same but have been unsuccessful. How to do this to the 2015 RX 350? Please note that the 2014 hack does not work on the 2015 model year.
View 4 RepliesHow to turn these off with vagcom?
View 10 Replies2015 AWD. How do you fully turn off the traction control?
Seems like i can press the button and it comes back in a minute. I tried holding it down.
Also, the seat belt chime. I take off my belt once I get in a parking lot, and the chime is annoying as hell.
So i did this with mine but friend just bought 06 6.0. How do u shut the chime off for the seatbelt again. I know parking brake on key to on position not run. How many time do u buckle and unbuckle again?
View 14 RepliesI have a 2007 Toyota Camry LE, and the seat belt light keeps on flashing and the airbag light is solid. We have tried literally everything possible, tried replacing the seat, replaced the seats sensors, tried a airbag module out of another 07 camry with exact same part #. Toyota have diagnosed that all the systems for airbag is fine, except it has something to do with the seat belt of the drivers side/or module but all that's been checked and still no luck. My car is due for Safety inspecting coming month and need this to fixed. How to handle this. Btw light came on because we had a blown fuse for the drivers power seat, and my mechanic thought that it was the motor so we replaced the seat and noticed that it wasn't the motor. Was just the fuse and we put back the original seat and everything is functional except the lights came on. No accidents on it to the extent i know. and the wiring is all plugged back properly without anything like wiring damage.
View 9 RepliesInstructions on how to disable your seatbelt chime.
1. Buckle Seatbelt (1.1) go to ACC mode.
2. While depressing the brake, turn the key to the ON position. I Was thinking someone might experiment with in the ACC mode might work by pressing the start button w/o your foot on the brake pedal.
3. Press the trip reset button a few times, stop when the ODO is displayed (not trip distance - A or B). If the odometer starts at the mileage, cycle through anyway.
4. Turn the ignition to LOCK.
5. Unbuckle the driver's seat belt.
6. Turn the key to the ON position again. When the dash lights comes on, press and hold the trip reset button, and count to 20 (slowly).
7. While still holding the trip reset button, buckle the driver's side seatbelt.
8. The odometer display should read "b ON" or "b OFF". Depress the trip reset button to toggle.
9. Unbuckle and Turn OFF the car.
Is there a way to deactivate the seat belt chime??
View 14 RepliesOkay, it took me a while but I finally found a "chime stopper" with the correct configuration for the Gen 6. For those of you who (like me) are sick of the stealership telling you that they would turn into a frog if they disabled a safety feature, or that they want an hour of diagnostic time to do so, pick up a set of these [URL] ....
View 3 RepliesI bought my second Prius yesterday and have noticed that the driver's side seat belt sensor is finicky. Please note, I don't want to turn the warning chime off. I know how to do that, and it isn't the solution I'm looking for. I wear my seatbelt always, but in case I do forget to buckle myself (or my passenger forgets to buckle up), I want to receive an accurate warning.
So, here's what's happening. Even when the seat belt is buckled, the warning chime will sound until the buckle is clicked in *just* right. Sometimes it works on the first buckle, sometimes it takes five or six tries to get it right. I've tried the basics (compressed air, checking connections), but neither provided any solutions. What's my next step? Can I buy a new buckle assembly (or just pull one off a junker)?
I just bought my 06 Hyundai accent last night. Just today I noticed my seat belt will chime after I remove the belt, even if the car is in park. It's not a big deal but it was enough to make me look through the owners manual to see if it could be disabled. Well, I didn't find my answer so I thought maybe someone here has already done it. So, how to disable the seat belt chime?
View 7 RepliesI'm new to the board always been into old school air cooled vws but just bought a 20th anniversary GLI Jetta and need to know how to deactivate the seat belt ding ding. The car did not come with an owners manual so can't look it up.
View 8 RepliesHow to make this go away? When I leave the car running and go into the store, I would like to leave the engine and heater running (I live in Utah) so my family doesn't freeze. The chime, is very aggravating. Neither of my Audi's (A4/TT) do this.
View 7 Replies