Toyota - Tacoma :: 2008 - No Click When Key Is Turned If Starting Cold
Apr 8, 2012
After my car has sit for a couple of days, it doesn't like to start. By, " doesn't like to start", I mean it doesn't even click when the key is turned. I put a new battery in it but that didn't work. If I get it to start it seems to always start after coming out of a store (knock on wood). This only seems to be a problem after it has sit for a while.
View 9 Replies
Advertisement
I was told that fixing the reverse gear can be done without dropping the transmission. Is there anywhere I can see a video of this? My shifter locked up out of nowhere and when I got it back loose it started clicking in reverse only when I back up.
View 1 Replies
I've got a 1996 Tacoma - manual transmission, 4 cylinder, 2.7 liter engine with close to 170,000 miles on it - owned it for 10 years and 100,000 miles. Wonderful, great truck. Except.....
It has two starting problems and I can't seem to sort them out. The first is it's incredibly hard to start when the outside air is hot. Living in San Francisco, I usually forget about this problem until I drive to the central valley to visit my mom in August. Nothing like coming out of the rest stop, trying to start the engine and then having the feeling of doooh! again!. Seems to be worse when the outside air temp is over 85 or 90 degrees and the engine has been running than sits for 5-10 minutes. Cranks fine but won't catch. When it finally catches, it's like it's really slow to fire - can't quite explain it, but it's like it's doing a lot of thinking about actually running and has to talk itself into the idea. Can take 5-10 minutes to finally get it going, but usually 30 seconds to a minute. Always worried this'll be the time it doesn't want to go. My mechanic has looked at it a few times - but it's almost impossible to recreate in San Francisco when I get home due to the lack of warm days.
Second problem is trouble cold starting. When I come out in the morning, the engine takes two or three attempts to get it to start. Once it again, it cranks fine, but it's as if there's no fuel getting to the engine. If I just keep cranking, it won't fire but if I crank it, turn it off, crank it, turn it off and crank it again it'll always catch on the second or third go. Once the engine is at temp, it seems like less of a problem and easier starting. My mechanic say's "It's an old truck and it always starts eventually, so don't worry about it."
View 4 Replies
My wife had the misfortune of the horn sounding each time the signal was turned on. Solved problem by not using signal... However, the horn still went off after the truck had been turned off for an extended period of time (long enough for her to leave and not hear the horn until returning a couple hours later). She was able to stop the horn by placing the vehicle in neutral (manual transmission). I have not been able to reproduce the problem. I thought it may be the "relay integration", but after removing this from the vehicle the signal does not work, but the horn still works. Is there a relay, switch, etc. that controls both of these devices?
View 1 Replies
I have a Toyota Tacoma 4 wheel drive it has a v6 motor. here is whats going on...sometimes it starts just fine,other times i think when it gets cold i try and start it.... it will crank over just fine but does not start, then i turn the key off and try and start it again and it starts just fine,sometimes when its acting up i try starting it and after trying to start it after 3 tries ir runs rough for just a sec or too.
View 1 Replies
I have a 1996 Toyota Tacoma, 5 speed manual pickup.
Occasionally I use the air conditioner. I'll be driving along and it's working fine but then it stops putting out cold air. I pulled into the mechanic one day and confirmed that when it is not putting out cold air, the compressor still seems to be running.
If I go into a store for about 15 minutes and then come out again, it works again. What might be happening?
View 6 Replies
I have a 1998 Camry. My directional light and click correctly when I tun them on. When I GENTLY turn off the directional signal, I hear the relay continue to click, however the dash lights do not blink, nor do the outside lights. If I let the directional lever jump back into place, the problem does not occur. Is it the switch in the column, or the relay?
View 1 Replies
I bought a remfg denso starter for my 2000 toyota tacoma prerunner 3.4L V6. I spent hours without success trying to get the old starter out. Brought it to a shop and had the new one installed. When I do a cold start, there is a screech at the end when the engine catches that sounds exactly like starting a car that is already running. This happens on cold starts only. Warm starts work fine. Due to the fact that I bought this part separate, having to pay to have a new one installed again is annoying to say the least. I spent another 4 hours today trying to get it out without success. See YouTube link for video of the noise. It's actually the quietest one yet.
View 13 Replies
The truck has 230,000 miles and has a squeal that sounds like a belt but it's not. I have put the truck in neutral coasted with the engine off and the noise is still there. The noise only happens when the weather is cold and only when the truck is coasting. Under acceleration the sound goes away.
Toyota Tacoma Prerunner 2003 (2.7)...
View 3 Replies
This is a great little truck we only use occasionally. It has 145,000 miles and runs great, but the a/c temperature is very sporadic, and this week it is 100 degrees! One day it will work fine, and the next day it will only blow hot air. Sometimes the air starts out cold, but after 5 min of driving, it turns hot. I have had the freon checked and my mechanic said part of the compressor (forget what he called it) was probably getting stuck at times, and he would have to pull it all out and possibly replace...
View 3 Replies
I have a 2001 Toyota Tacoma that has a knock or ticking in cold weather. The problem starts sometimes immediately after I start and other times it is only when I press on the gas in the cold mornings after a few min warm up. The noise goes away after 10 min. The question I am wondering is this:
1: could it be worn piston rings and the pistons are slapping the cylinder wall
2: is it an oil pump problem or a oil restriction issue
3: is it a valve guide issue
4: with the history of the 2.7 having exhaust manifold issues (poor manufacturing) could a cracked manifold be the issue
I change the oil myself, the oil filters have been OEM toyota, the noise has been going on since 60,000 miles, the truck is at 230,000 miles.
View 8 Replies
A friend of mine owns a 2002 Toyota Corolla with around 100k miles on it and it has some sporadic problems. Once in a blue moon the engine light comes on because of a misfire and seems to be around the same time it is humid and wet out (suggesting spark plug wires). However it recently sat overnight, after a slow rain, and would not even turn over the next day. The lights are not dimmed in the car but there is only a faint hum when the key is turned. What is wrong?
View 1 Replies
I bought a used 2008 Toyota Camry per-certified from a local Toyota dealer about 2 years ago. About a year and a half ago I got in the car to go to work one morning and it would not start. You turn the key and all the lights come on but nothing else happened. Took the battery to Auto Zone and they said the battery was OK so I had it towed to the dealership. Dealer called when he got it and said it cranked right up for them and it has not been an issue since.
Two days ago I get in the car to leave work and the same thing happens. You might hear the starter click when you turn the key but nothing else happened. The car was getting power from the battery but that was about it. I tried to jump the car off but still the same thing. I had the car towed to a local Goodyear shop and after looking at it the said it was a problem with the alternator, that needed to be replaced, which also killed a cell in the battery that needed to be replaced also. They said since they are replacing the alternator they might as well replace the belt also.
View 14 Replies
I have a 2001 Toyota Sienna xle that started running rough when the weather turned cold. When started, the car idles very high and will not shift properly until it was been running for around 5 minutes. After that it will run well for about 10-15 minutes and then begin to run rough or poorly. The problem is very noticeable at low speeds and when stopped. It never actually kills, but it feels like it is going to. At high speeds it is less noticeable but occasionally you will feel it jerk or chug like the transmission is slipping or a belt or something.
I took it to a mechanic who checked the codes and found that the ignition coils were supposedly bad. I say supposedly because they replace three of the ignition coils and the problem still persists. I then took it back to the mechanic who then told me it was the oxygen sensor. The o2 sensor was replaced and the problem is still there with no noticeable improvement. I again to it back to the mechanic who tells me that they scratching their heads.
I have done some looking around on the internet and have found some discussions that seem to have some promising leeds and actually last weeks car talk show had a caller who described a similar problem. The guys told him it could be a oxygen sensor but they thought a better possibility would be EGR valve or a vacuum leak. Not sure if this sienna has an EGR, but I plan to suggest looking into it to the mechanic. Also, I found some discussions talking about the idle control valve and the engine control module.
View 2 Replies
My friend's tacoma is having some starting issues.. He says when it's cold it starts right up but if he's been driving and turns it off then tries to start back up it won't start.. Said he has to let it cool a bit and then it'll start.
View 3 Replies
We have a 2008 Toyota Sequoia with 60k miles. We purchased 100k mile warranty when we bought the car new. The past year or so, the car will stall just after starting. There is no rhyme or reason as to when it will do it (hot, cold, morning, day, night, etc.). It will stall after starting and won't start after several attempts. You wait approximately 10 minutes and it will start just fine. This happens about 2x monthly, sometimes more sometimes less. Toyota has no idea what it is, they tried cleaning up the carbon buildup.
View 2 Replies
My 2008 camry with 84000 miles is starting to use a quart of oil every 3,000 miles. Inam told that this is the beginning of the end. Can't I just keep adding oil? Or do I really need a new car/engine?
View 19 Replies
How to diagnose what I think is a failing alternator?
Here are the symptoms:
- Hard starting in cold weather
- Battery not at full voltage when truck is parked (usually around 11.5-12 volts. I have been putting a charger on it some nights)
- Lights seem to dim when I've got accessories running, like heater fan, heated seats etc. Lights get brighter with engine RPM, like when pulling away from an intersection.
What's my next step to diagnose this? I did a search, and didn't see anything. My battery is probably still under warranty, so if that's the issue, it should be a free fix. How hard is it to install an alternator in a 2005 with 5.4L engine?
View 3 Replies
94 f250 cold start prob will only start when fuel is squirted in to throttle body/air intakes ?
View 14 Replies
I have a 2013 Tacoma TRD with 18k miles, totally stock after driving awhile intermittently the front left wheel has been locking up like I tapped the brake just on that wheel. I've taken it to Toyota and they cant duplicate the problem. This last weekend I drove several hundred miles and the right side started doing it about two to three seconds after the left side for about five minutes then ran fine. It actually makes a chirping noise and slightly jerks the wheel in that direction. This has only happened going over 65mph. Since Toyota claims to have never seen this problem there basically telling Me to drive the truck until it gets worse. They checked the brakes and bearings out.
View 1 Replies
I have a 1995 Toyota Tacoma with a manual transmission that will not go into gear. How can you tell if it is the clutch or the slave cylinder that is bad?
View 2 Replies