I have a 2008 Toyota Tundra which is vibrating intermittently about 5 to 10% of the time. I have had the tires rotated, and balanced, plus the front end looked at by a dealer. Still does it.
View 1 Replies2006 Toyota tundra starting problem only intermittently, id say about half the time recently it does this. Ill go to crank my truck, turn the key over and it makes a loud CLICK/thud under the hood. Lights go dim, clock shuts off etc. Turn the key off and back on, CLICK. I have to repeat this 3-4 times before starting sometimes. And once or twice the starter would turn over for 3-4 seconds before finally firing up. Ive check the battery and alternator at the local auto zone and a local dealership, both checked out fine. The starter is under the intake manifold. I have checked grounds/connections etc but dont see problem.
View 3 RepliesMy 07 tundra starts and then stops running it does this intermittently. I recently put in new battery.
View 2 RepliesSlightly into my drive, my car begins to vibrate in what feels like the front end as well as in the steering wheel. At first it started when I was at high speeds on the highway but now it happens as lower speeds (like 40 mph). It does not happen at a specific speed only (so I don't believe it is a balance issue). Also, it doesn't happen all the time...sometimes it only lasts 5 minutes and sometimes it lasts longer. My tires are fairly new and recently checked for uneven wear, I've had an alignment and balance done so now I'm confused about the difference between issues with the following parts: struts, tire rods, rotors, or CV joints.
View 2 RepliesI bought a used Toyota Camry 2012. It has 40,000 miles on it now, The car shakes all the time. It feels like the front wheels are vibrating, and the suspension is bouncing all the time. At slow speeds, and it gets worse at faster speeds. All I can say is that it is very uncomfortable drive. When I bought the car a year ago it had a very luxurious ride. Now it feels like there is something very wrong. Enough wrong so that I do not even want to drive it anymore. I have taken it to 4 different Toyota dealers, and one private mechanic. All say that there is nothing wrong with the car.
View 2 RepliesA friend of mine is giving away its head unit (it has video) from a toyota tundra 2008, can it be installed without too much trouble on my corolla 2013 L?
View 1 Replies2008 F-350 wheel will lock for no reason. I think the Hydroboost has a hair line crack it and when the temp and pressure reach a certain number then it sends brake fluid threw the crack to the caliper? I also heard it could be in the ABS because its locking just one wheel?
View 1 RepliesMy 2001 tundra v8 4.7 liters. Will not go past 90 miles per hour.I'm not a speed person but I like to know my truck is in top shape.Odo reads 99073 on the i way I tried pushing it to a 100 mph but it not go, what's happening to my truck...
View 6 RepliesI have an 05 Tundra. I was backing out of my driveway and got into the street and put the truck into drive and nothing. I then tried reverse and again no movement. No prior problems with the transmission. I cannot even find the dip stick to check the fluid. What might be wrong with this trans or truck?
View 1 RepliesOkay, 2000 Tundra (185,000 miles) starts out with usual pressure. After driving a ways pressure drops down to dangerously low and stays there (not detectable when driving, other than gauge). Mechanics measure same pressure drop using alternate pressure gauge at engine. They assumed oil pump, which would mean pulling engine, but were advised bad oil pump is very unlikely on that Tundra (and I don't think the symptoms quite suggest that), and also advised that oil suction tube could be clogged, also necessitating pulling engine, but oil has been kept fairly clean. Car also sits for long periods.
View 4 RepliesI have a 2005 Tundra, 60K miles. Dealership just told me the frame is rusted out, with actual holes in frame under driver side. Said car was unsafe to drive or have on road. Called Toyota and opened case but said I was out of warranty and they were not accountable.
View 19 RepliesI bought a 2008 toyota yaris last year from the dealership when it was returned from a lease. It has been running really well, couldn't be happier with this little car. Weather is practically perfect, but today when I was leaving, I had trouble starting my car.
After turning the key for 2-3 seconds the car finally starts and once it starts is runs fine, no service lights come on, no issues with lights, no sputtering, no stalling. My Toyota dealership isn't open until tomorrow morning, but I have an appointment at 7am.
What this could be and if I drive the car anywhere else today (10/02/11) is there a risk I'll not be able to start it at all? And end up needed a tow?
I can hear a "ringing" noise that appears to be coming from one of the wheels. I can hear the noise when I have my windows down and am driving at slower speeds. The noise sounds similar to a bell ringing and the sound disappears when I apply the brakes.
View 4 RepliesI had the oil changed recently in my 2008 tundra 5.7 v-8. I noticed the oil pressure gauge moving. When I started the truck, I noticed the gauge will move to the right of the indicator in the middle of the gauge and then it will go back to the middle mark on the gauge when it is warmed up. I also notice that it moves a little when I accelerate. Maybe it has done this in the past and I just have not noticed but was wondering if I should be concerned.
View 5 RepliesMy Toyota Tundra 2011, driven enough to haul a horse locally (6000 plus miles) is now unable to go above 30 mph, it was fine last week. Toyota dealer says it is both of the air injection units and switch. Of course it is out of warranty 3 months.
View 10 RepliesJust recently purchased a used Toyota Camry , i love it. So far everything is great about it, only negative part is that i feel when i turn the steering wheel like a knocking sensation and you can also hear it. Its not the normal grinding sound other people are experiencing. It feels like theres something loose in the steering column. Also while I am driving i can hear like a thump on the right front suspension. normally this sound when i am going over bumbs. Is this like the shocks or something?
Just in case i have a 2008 Toyota Camry SE.
Location of cabin filter 2003 toyota tundra....
View 4 RepliesI have a strange vibration that radiates from, i think, the drive line or transmission.
View 1 RepliesMy 2003 Tundra is showing a fault light for the SRS. It only shows when the air temperature is high. After running the A/C for the drive home, I can turn off the truck and restart it and the fault light doesn't show. That seems to indicate the fault is related to cabin temperature. What is causing the fault?
View 18 Replies1) Why is my neighbor's late model Tundra chirping and flashing the lights at regular (maybe 20 second) intervals?
2) Why can I hear it a house away but my neighbor (at home) cannot?
3) Can I stop it? If it something like hey idiot, you left it unlocked with the keys in the ignition, maybe I can.
4) If I resort to violent methods to stop it, will I be subject to criminal penalties. or would a jury of my peers find it justifiable truckicide?
2008 Tundra 5.7 only 55K miles – What is causing an intermittent misfire at startup? It’s been running great, then 2 weeks ago when I started it up I could feel a misfire. By the time I backed out of the driveway the check engine light came on. This is what I have learned so far:
•It only happens when you start the engine and the engine is NOT at operating temperature.
•The engine code always reports misfire on Cylinder #2 I put in a new plug and swapped coils but it still reports the misfire on cylinder #2.
•Once it starts to misfire it will continue to misfire until the engine is at operating temperature and you restart the engine. NOTE: You MUST restart the engine for the misfire to go away. It will be running rough, turn engine off/on once it is at operating temperature and it's as smooth as can be, no more misfire.
•One time I started the truck, I felt the misfire and drove it to a parts store to read the code. Engine was fully warm by the time I reached the parts store. I did not power off the engine, plugged in the tester and read the code which was a misfire on cylinder 2. I cleared the code and within 2-3 seconds it logged the misfire on cylinder #2 again. Cleared the code several times and it kept reporting misfire on cylinder 2. You could also feel the misfire happening. Turned engine off, started it right back up, like before no misfire, cleared the code and it no longer reported a misfire.
•This just started intermittently happening. This morning it happened again, I drove it for about 5 min, engine was about 75% it’s normal operating temperature, powered it off/on, still had the misfire. Once engine temp reached normal temp (about 9 min), I turned off engine, started it back and like before problem was gone.
What is causing this to happen?