Toyota - Sienna :: 2008 - Slight Grinding Or Rubbing Sound When Braking
Aug 24, 2012
I have an 08 Toyota Sienna and yesterday I started to notice a very slight grinding or rubbing sound when I apply the brakes coming from the passenger side front wheel. I can only hear the grinding or rubbing sound when I am going very slowly (like the last 20 feet when approaching a stop sign). The sound pulses slightly like two surfaces that are not parallel are rubbing. There is no pulsation or wobble felt in the brake pedal. I'm thinking it's time to get the rotors turned, but it could also be the brake pads.
View 5 Replies
Advertisement
2004 Sienna LE with 193,500 miles. While driving home tonight I started hearing a grinding noise from the passenger front wheel. The noise goes away on acceleration and braking. Whenever I take my foot off the gas it starts to make the noise again. It sounds almost like a brake noise but I just replaced the caliper bracket this past weekend and the brakes look great (less than 20,000 miles on caliper, rotor and pads). I suspect a bearing may be going bad and want to know if these symptoms match a bad bearing. The wheel bearings are all original.
View 9 Replies
I have 2003 F150 SuperCrew 5.4L XLT. For past month or so, have been hearing metal rubbing sound and had shakes in braking - as well as a "grabbing and pulling" sound near brake pedal - very aggravating to say the least. Weird thing is the grabbing and pulling sound only happens under 10 miles an hour or coming to a complete stop. (The grabbing sort of sounds like the sound the ABS makes when hit really hard)
Yesterday I had brakes and rotors replaced - mechanic said front rotors were beyond turning - very bad. 135,000 miles on truck. Felt more comfortable until I pulled out of shop and when I applied brakes, had the same grabbing/grinding sound, but no pulling. Went back to mechanic and had him ride with me to hear sound, and he is stumped.
Knew it was safe(r) to drive since new pads/rotors installed, but when I got up to 55mph and barely touched the brakes, the steering wheel began to shake violently - but no sound/grabbing from brake pedal area like I get when I am 10mph or under. Really at a loss right now.. What's going on?
Truck is a 2WD, also hear some thump thump thump sounds from front left tire, which are only one year old, but tire man said that was from suspension arm or something - nothing to worry about he says.
Some people have said "bearing" or "hub" but when brakes were replaced, the bearings were repacked...is this the same thing? Is the current problem safe to drive with? I do not take vehicle out of the county - just to work and back and hunting on weekends.
View 1 Replies
Just purchased a used 2008 prius with 80,000 miles on it. Braking system makes slight grinding noises when getting below around 10mph. I know the brakes are different, so I'm not sure if this is normal or if it means my brake pads need replacing? Car didn't come with an owners manual .
View 6 Replies
I have a intermittent problem with the abs. when I go around a right hand curve there is a clicking sound. This happens between 30 and 40 mph. When I go around a left hand curve the brakes will grab, with the skid i-con illuminate , but no fault code. I have had the toyota dealership looked at it. But they couldn't duplicate. I also had a independent mechanic look at it, he put the computer on it.
View 8 Replies
I had my local race shop install my new PPE headers and how I have a rubbing and grinding sound while taking right turns. They have had the car for a few extra days and they say they cant seem to find the cause of the problem. It rattles on a pot hole, it grinds on right turns and sometimes vibrates on highway cruise control driving.
View 14 Replies
I have a 2008 Toyota Yaris Hatchback with only 60,000 KMs.
I have been having a lot of problems with this cars ABS and brakes. For a few months now, the ABS Light and "!" will come on and off throughout my drive to work and home. Also, sometimes when I hit the brakes it makes a LOUD grinding noise and when I'm holding down the brakes the car doesn't stop as fast, it kind of like skids. Now, I've noticed that this noise only occurs when the ABS light is OFF. When the ABS light and brake light come on, NO noise what so ever.
I've gone to multiple mechanics and replaced almost everything you can name for brakes (pads, drum, rotor, etc.). I've also tried replacing the ABS sensor wires, but still I am experiencing the same problems. It's really frustrating because the noise only happens sometimes, and of course it never makes the noise when the mechanics in the car with me.
I've made a video of the noise it makes, you can check it out here ......
View 2 Replies
Our 2008 Mazda CX 9 has been making a grinding sound and also the ABS light comes on when we make a right turn on a slight decline after having come to a stop. We have reported to Mazda multiple times but they always say they can't replicate the problem and can't find anything. I am concerned that something in the car is becoming more and more damaged because there is no way something grinding like that can be good for the car and I am frustrated that it's never been diagnosed especially now that it's out of warranty although I established a record of the issue long before the warranty period expired.
View 5 Replies
Have a 2011 Toyota Sienna with about 50k. Ive been having this problem for over a year but was not very noticeable. But in the last several months, the shudder has increased and the car shakes a good deal when I brake downhill.
The problem does not happen on a flat surface or downhill.
I did some online search and some seem to point to warped brake rotors. Is that likely? Also more importantly, how dangerous is it to drive more in this condition? From where we live we need to negotiate steep downhill every day.
View 4 Replies
I keep coming up with unusual issues with my can. Ok, so I just had to replace brakes and rotors on the front. Now when I brake, it makes a mechanical whine/squeal and slips for a second. (Randomly, not evertime) The noise seems to come from peddle. It's not a grinding noise like you would hear with low pads or rotor, or even caliper seizing up. I'm hoping nothing serious. Possibly bad abs pump??
View 19 Replies
2006 SAAB SUV AWD, Right front wheel rubbing/grinding. When cold, coasting and braking. Not continuous. It has completely died while turning. New tires all around. Had both front brakes replaced x2 in 2 years. Still rubbing feel in right front.
View 4 Replies
My 2000 Toyota Sienna has been making some concerning noises. It makes a periodic grinding noise, the period is related to the wheel speed...i.e. the noise happens once each time the wheel goes around. I can hear it while I drive, and it's even louder when I roll down the windows. The weird thing is that the noise stops when I hit either the breaks or the gas. First mechanic says that the wheel bearings are shot, and the second says they're fine. There is no "jet engine taking off" noise that I am told is typical of shot bearings, but there is a wump-wump-wump noise at higher speeds.
View 1 Replies
Had my wheel bearings replaced 3 weeks ago from a mechanic I never went to, as mine was on vacation. 3 days later tire fell off while driving. So we took it to my regular mechanic and had all safety issues fixed. New brakes, rotor, hub. But noticed that a grinding noise appeared. Took it back to mechanic, and he said that it was due to the spindle being slightly bent. Thst it wasnt a safety concerns, but will cause rotor/ brakes to wear out quicker.
I'd like to trust my mechanic, as he has always done good work for me in the past. But am a little shaky over every noise. I'd he correct?How soon should I get it repaired? I just dropped over $600 to get the can drivable again. So if I can push it off until I can afford it that would be great! Otherwise, I might need a small loan to repair.
View 7 Replies
2004 Sienna LE with 193,500 miles. While driving home tonight I started hearing a grinding noise from the passenger front wheel. The noise goes away on acceleration and braking. Whenever I take my foot off the gas it starts to make the noise again. It sounds almost like a brake noise but I just replaced the caliper bracket this past weekend and the brakes look great (less than 20,000 miles on caliper, rotor and pads). I suspect a bearing may be going bad and want to know if these symptoms match a bad bearing. The wheel bearings are all original.
View 4 Replies
I have a 2009 Toyota Camry with approx 124K miles on it (my daily commute isn't that great...). Lately I've noticed some vibrations or rubbing when I'm turning:
There is a constant rubbing/grinding noise when turning. It is more obvious when I turn right. It is definitely coming from the front tires. It does not sound like metal at all. Just like a rubbing noise, that causes a slight vibration up front.
When I'm driving straight, at a certain speed, I notice the vibration/rubbing sound, but it eventually blends in with the sound of the road. The ride isn't bumpy at all, so I don't think it's related to the struts. When I pull out of a parking place, turning left, it just feels "loose", if that makes any sense.
From what I've been reading, it seems to lean towards a bad wheel bearing, or CV issues. What the problem could be?
View 6 Replies
It started a couple months back, under about 20 mph I feel/hear a rubbing or grinding sound. Appears to be coming from the front end, I put I on a rack and drove it but couldn't isolate a cause. I rotated the tires, replaced the brakes to be sure there was no warping. Everything looks good, but something clearly isn't.
View 2 Replies
I have 17" wheels with 215/45/17 tires and when I brake hard it makes a rubbing sound. I checked after it happened for any possible signs of wear on the fender well and tire and found nothing...
View 3 Replies
When I put my van on reverse, it makes this one big "thug" sound. It happens when van is rolling. That's the only time it makes this sound. Is this a serious car problem that needs immediate repair? It has 129K miles.
View 3 Replies
I have noticed this rubbing, not quite grinding sound/vibration when I take off and turn. For instance pulling out of a parking lot and turning either left or right. Truck will do it only after it's been driven a while. I originally thought it was just the limited slip ratcheting but recently just changed the rear axle fluid adding Amsoil this time. I did not add any friction modifier because I didn't think the Amsoil needed it. So after going on a 500 mile trip I find it is still doing it. The truck sits at the stock ride height and has stock size wheels and tires on it. What it could be ? It only happens in the turn, not while driving straight. It still sounds like the differential but just want to be sure.
View 7 Replies
I got a strange one. 03 expl 4x4 xlt, started making a weird sound, almost like a rubbing, or a light grinding, comparable to the sound and seat of the pants feel you would get if say you ran out of good brake lining and were creeping the car forward at half mph while dragging the breaks slightly but (except it is when you are stopped and in P). Break pads are fine, just when you come to a stop and put it in park. lasts for about 1-3 seconds. No tranny slippage or other issues yet, all seems to be working. I don't use 4x4 hardly at all but not in last 6 months since there is no snow. Since it is so short I cannot pop the hood to track it down. Torque converter? Fan clutch?
View 3 Replies
A few days ago I purchased a brand-new 2015 Santa Fe Sport 2.0T LTD, with about 80 miles on the odometer. During the test-drive, I noticed a rubbing/faint grinding sound which emanated from the right front corner, and only lasted a second or two. I was driving straight ahead at about 30mph on a relatively smooth paved road at the time.
The dealer told me they were aware of the noise, and claimed a small stone was to blame. (it had been test driven a number of times). I was assured that the problem would be fixed when I picked up the car.
On the drive home from the purchase, it did it again, and has done it every day that I've driven it. (about 150 miles on it now). Are these wheels susceptible to having stones lodged in them?? (assuming that's actually what's causing the noise).
View 1 Replies
