Toyota - Rav4 :: 2010 - Brakes Making Grinding Noise
Jan 16, 2014
Just bought a 2010 Toyota Rav4 about 2 weeks ago. It rained the other day and the brakes made a grinding noise the first time I braked after starting the car but didn't make it after that. Did it again the same day, still raining, but only the first time I braked after starting the car. I have a 30 day guarantee on the vehicle and need to know quickly if the brakes are bad or not.
View 7 Replies
Advertisement
I thought I'd be free of problems having bought a new Toyota Rav4 in Jan. In June, with less than 3K miles, my husband had a (BIG) fender bender (turns out his meds made him blank out, he was driving at 10-15 mph) (and he is going on 80). Repairs cost over 3K, but I was able to drive it to the dealer. Soon after I got it back a month later, I started hearing a brief grinding noise under the accelerator, at speeds of 20-30 mph. Mostly after I took my foot off the accelerator, once or twice after I took my foot off the brake. This noise sounds like brakes grinding, appears very sporadically and briefly. I took it to the dealer and of course they could find nothing wrong, said everything checks out. They said to bring it back when it's doing the noise. Which it does maybe once a week, for a second or two. sheesh.What to do? I actually want to start all over, I do not want to drive with my ear to the gas pedal. (My husband now only drives in town!)
View 5 Replies
Our 2010 Toyota Camry makes a squealing noise as we back out of our garage.Does this mean we new rear brakes?
View 15 Replies
I have a 2007 RAV4 Sport and it is making a noise..... kinda like a rubbing noise, almost a squeaking noise. It happens when I first start up my car and more when the weather is colder. After a few minutes of driving it stops. It also seems to be louder when I am idling, and quiets down once I begin driving again. It seems to be coming from the right front part (the right side if you are sitting IN the car, the left side if you are standing in front of the car and looking at it) of the engine. I can see a belt down in that area...... is that probably it? I have not ever had any other issues with my car and I have had it since it was new.
View 3 Replies
I recently had TSB 0146-10 ( grinding noise at cold start ) performed and my cold starts are even louder now. My dealer screwed it up 2 times and I have to return again due to this noise, leaking valve covers, and lots of metal filings found in oil and filter? It seems to me Toyota has a big issue with the VVT cam gear on this engine and wanted to post a video of my cold start?
My vehicle is a 2010 RAV4 with the 2AR-FE ( 2.5 ltr ).
This is after 2 cam gear replacements and the dealer confirmed this to be the sound of a bad VVT gear.
YouTube
View 11 Replies
My car came back from the shop yesterday with new brakes and pads and seems to be making some odd noises, both at low speeds and while breaking. I called the shop this morning and they said that this sound was normal for awhile but to come back in a week if it persists. Is this sound advice, or should I be driving my car right back to the shop?
2005 Hyundai Tucson 122,000 miles
View 6 Replies
Is it just me or is this an ABS thing? during a snow storm i was going about 25mph and had applied the breaks and started making a grinding noise... if it is the abs how are you suppose to work with the response time for a quicker stop.
View 2 Replies
I have 23, 400 miles on my Kia Sportage 2009 and just found out I need to replace both of my rear brakes.They were making grinding noise. Is this a defect? Seems like low mileage to have to replace them?Also my front brakes are down to 50%. Is this a known KIA issue?
View 4 Replies
Our 05 Corolla, 160,000 miles, has started making a grinding sound when we upshift into 3rd, unless we let the rpms fall to below 1000. My husband said the clutch needed adjusting, but the dealer said this clutch is not adjustable. The dealer found nothing wrong and could not get the car to make the noise while in the shop. (It did actually get better for a while but got worse again almost immediately after the visit to the dealer.)
Our other car (a Saturn) has over 250K miles on the original clutch, so I don't think it's our driving. What could be wrong, and is this something that needs to be addressed soon lest we damage something irreparably? Also, this car has, since purchase, been nearly impossible to shift on the coldest mornings. Really, sometimes it is all I can do to get the lever in reverse to back out of the drive in winter (in Kansas). Warming up works, but it seems to take an inordinate amount of time before shifting is"normal."
View 3 Replies
I have a 2000 Toyota Avalon. The A/C will only come on if the switch is turned to full blast, but even then it makes a really loud grinding noise and does not blow very cold air. Is this a compressor issue or blower motor? I am assuming the switch is bad since it only works on highest speed, but could it be something else causing this also?
View 3 Replies
So, last week I got my transmission replaced and they also had to replace the CV axle because it was damaged beyond repair when the Transmission self-distructed. They drove it after all the repairs and said it was driving fine, just that it had a belt squeak.
On my way home (30 min drive) about 10 minutes in, still in the city, my brakes start making a grinding noise and sort of a thump thump thump when I brake which sounds like its coming from the passenger side front, it makes me really nervous. It doesn't sound like any brake grindy noise Ive ever heard before and it wasn't making any brake noises before it broke down. (On a side note: it also made a weird noise maybe the first 3 times I drove it after getting it back and I turned the wheel hard to back out of a parking space, that used to be when I heard the belt squeak but I haven't made it squeak since I got the car back.)
Everyone I talked to said it sounded like it needed new pads so tonight I bought new brake pads and rotors for the front and got everything taken apart. The rotors didn't look bad at all, just some light surface scratches, nothing deep, no warping I could see, and the brake pads look almost brand new. I did notice that the inside brake pad on the passenger side was missing its little metal plate that is usually between the caliper and the pad, so I went ahead and replaced all of the brake pads hoping this lost metal plate was the issue.
I also turned the rotor by hand on each side while the brake pads were off and the only difference I could notice was when turning the passenger side one it made a little more noise almost like it was loose.
I got everything put back together and drove around the neighborhood with my boyfriend in the car to listen, the grinding noise was gone and it seemed to brake really well (never got above 30 mph.) However, on my way to return the rotors to advanced auto (45-50 mph) it started making the thump thump thump noise but without the grinding, still on the passenger side. I can feel it in the gas pedal and now it not only happens when I'm braking, but also any time I let my foot off the gas pedal. The only time I dont feel/hear it is when I'm accelerating.
View 3 Replies
I have a 2006 Subaru Forester with 115K miles. It's been well-maintained and well-loved.
For the past few months, the brakes have been inconsistently making a dragging/grinding noise when coming to a stop at low speeds (<5mph). It sounds to be coming from the front half of the car - I can feel it vibrating a little near the driver side. We've taken the car in to be looked at three times - each time, the mechanics think they've heard the noise and report there is absolutely nothing wrong with the brake pads or rotors. Twice they reported a shim was out of alignment. After the last shim adjustment, the noise got a little better - instead of grinding, it's more of a dragging sound now. Because the noise is inconsistent, I haven't been able to crack the formula of the conditions that produce it, other than that it only happens as I'm coming to a stop at very low speeds.
Is there something besides the brakes we should be having inspected? Does this sound safe to drive?
View 10 Replies
I replaced the pads and rotors on my 1989 toyota camry yesterday. Took it out for a test drive and all appeared to be OK. I did not bleed the brakes, but did have to remove a small amount of brake fluid after installing everything.
On my way into work this morning there was quite a bit of grinding noise coming from the brakes. The noise was not consistent, happening both while brakes were depressed and also when not in use. It also would go away after a few minutes and didn't always happen while braking.
I'm thinking the piston may be locking up at times, but don't know. I'll also throw out there that this is my first brake job. I did follow my Haynes manual and don't think I did anything wrong.
View 8 Replies
What might be causing this symptom?
View 14 Replies
In September 2012, I had all of my brake pads and my front rotors replaced. On at least two occasions since then, I have noticed grinding. I took the car back to be looked at in October and today and in both instances the mechanics couldn't find a thing wrong with the brakes. On Saturday, I was driving more than usual and they were grinding the majority of the time. I'm not sure why this problem comes and goes and whether it increases with use over the day. I find it easier to replicate when coming to a stop in the street rather than in the driveway at a low speed. Is there something I ought to have the mechanics test out? In each of these cases, they have test driven my car, but at the same time, I don't want to tell them "Try driving it for an hour".
I drive a 2007 Toyota RAV4 (about 56000 miles on it) and while I am aware of grinding due to slight rust build-up, that issue usually clears itself up after the first few brakes of the day (I believe that this is a common problem).
View 6 Replies
I have a 2009 Toyota Corolla and it's making a loud grinding metallic noise on the front left side. It does it while I drive the faster I go the louder it gets. When I turn to the left it makes it louder, when I turn right the noise decreases. PG&E have been breaking the roads by where I live and there's a lot of little rocks I drive thru. I'm wondering if that's the problem?? What do I do?
View 4 Replies
My wife has a 2010 Explorer 4.0 with 46000 miles on it. Yesterday the compressor started making a grinding noise when you turn the defrost on. It's only when the clutch kicks in. I'm hoping its something simple but, I fear its not.
View 8 Replies
My 2010 RAV4 is not on the recall VIN number list but it has been surging occasionally since I got it in May. Dlr says No report of that. 2 days ago as I was braking from 20 mph to stop, the engine suddenly reved up fast and roared, I had to stand on the brake, fought it hard, acceleration ceased and I avoided rearending car ahead. Dlr & Toyota in a quandary, can't find problem, they still have vehicle, I have loaner. I'm afraid to drive it.
View 2 Replies
I have a 2010 Toyota RAV4. It is a great car overall but I have a persistent problem with a vibration from the rear of the car. It felt like I was running over tiny speed bumps at 35 to 50 mph. Toyota service looked at the car three times and told me there was no vibration and I should seek psychological counseling. My therapist told me that I did, in fact, suffer from numerous psychoses but that didn't mean there wasn't a vibration in my car.
So I took it in a fourth time and a mechanic determined that there was a vibration that occurred at 40 to 45 miles per hour on a slight incline during moderate acceleration. He believed that it was caused by the Sprag Clutch. He said it wasn't anything to be concerned about and I should ignore it.
The really bad news is that while the vibration has been there for 15,000 miles, I didn't take it in until 60,200 miles and even if they did recommend repairing it, I would have to pay for the transmission work as it is now out of warranty. My concern is that the problem will get worse and the transmission will eventually fall apart.
View 3 Replies
I have fairly new brakes on my 97 Chevy Tahoe with 202,000+ miles. For the last several months when I come to a stop, sometimes the brakes make a grinding sound (or 'boy-yoi-yong' sound- it's hard to tell) and the brake pedal feels like it 'slips' although the brakes do always stop the car. The brake don't always do this but it happens at least once or twice a day. Sometimes the problems is very mild, other times it's very noticeable. have it checked by two mechanics and they can't get the brakes to misbehave so they can't find the problem. All they did was flush the brake fluid twice and tell me it MIGHT be the master cylinder or the ABS system. My husband got laid off from his job and I am disabled. We can't afford to start fixing everything the mechanics THINK might be wrong with the brakes.
View 3 Replies
Friday I went to pick my daughter up from the school. Turned 2010 Rav4 off while waiting on her and then attempted to turn back on. I have a smart key, so it is just a matter of pushing the button, but nothing. Band teacher attempted jump starting it with no results. Next day my husband purchased a new battery from AutoZone and we installed it. Have lights, etc. now but it still won't start. tried putting the key up to the on off switch to get it to start, still nothing. It doesn't even sound like the car is even attempting to turn over.
There are multiple lights on in the dash, the check engine light, oil pressure light, electric power steering light, and the automatic transmission fluid temp light. I just had my car into the dealer to have the oil changed, tires, rotated, and the 25 pt. inspection done on it. Upon raising my hood the other night, I noticed that the reservoir for the radiator was empty. It should have been full, as I just had it into the dealership, so where did it go. Should I add coolant to it. Is there something that needs to be done after changing the battery?
View 1 Replies