Toyota - Echo :: 2003 - Knocking Creaking Noise When Brakes Applied
Jan 8, 2013
I have a 2003 Toyota Echo. About 6 months ago it starting making a knocking noise when I applied the brakes. I thought it was my differential (it isn't) because it is a used transmission. That's not it. My mechanics were stumped, of course it never seems to make the noise when they have my car. They also checked the rotors, and I maintain my brakes.They replaced a wheel bearing on the left front wheel, the noise stopped for two weeks then started up again. Only when I use the brakes do I hear it, and I hear it more often than not.
There also seems to be a bit of a creaking noise with it. It does it more in stop and go traffic, and the car usually has to be a little warm before it gets noisy. They ended up replacing a rear drum thinking the noise transferred to the front, didn't work. What could this be? it's pretty loud and disconcerting when I'm driving. It only happens when I use the brake (more so slower speeds) so what is left besides the wheel and the brakes? My mechanic said the noise stopped when they replaced the wheel bearing because they took the wheels off, and that somehow fixed it temporarily.
View 7 Replies
Advertisement
So I have a 2003 Passat wagon. While driving down the road with no brake pressure applied the front right brake makes a squealing noise. As if the caliper doesn't release pressure....what should I do? Any hints?
View 6 Replies
My '93 Toyota Corolla recently had dash lights come on when I applied the brakes - after parking, gear shift placed in 'park', and ignition turned off. I have never noticed this before (btw, have new battery installed within past two weeks). Is this an indicator of anything I should pay attention to? It did this about a week and now has stopped.
View 7 Replies
Why my 2010 Prius has 3 times now failed to stop when brakes were applied on a steep downhill in slight rain? Happened a year apart with no slick road and with tires both new and old. I pull up to a stop sign on a grade, apply brakes, the car slows, then there are metallic noises and the car glides 3-4 feet before stopping. I'm lucky no car or person was in front of me. Honestly not a skid at all. Service tells me I don't know about anti-lock brakes but I've driven with them on cars for many years with nothing like this.
View 2 Replies
OK, when I first got the car in June it needed strut mounts so I got the 034's and new bearings and all was good, recently I noticed just a creaking/knocking type noise, not the same as before. So I checked the bolts on the mounts just in case and they are good. Been reading lately about the subframe and it is leading me to believe that may be it. The noise is more noticeable at slower speeds when just going over slight road imperfections(like small dips) and sometimes I do not hear it at all even over rough roads?
View 6 Replies
Our gen 1 has developed a (currently minor) noise issue when braking. I'd like to sort it out before it becomes serious.
The brakes are still strong, and the regenerative system appears to be working. When the brakes are applied (even gently) there is a pulsing raspy sound, seems like it is coming from the front, driver's side. It is more rapid at higher speeds, and louder during rapid deceleration. I guess I'd call it 'grinding', although this is much less unpleasant than the classic 'grinding brakes' I've heard on other cars.
In any other car I would figure a warped rotor or worn out brake pad. But I had imagined that the regenerative system handled light braking, and conventional brakes took over beyond a certain threshold. Now I'm hoping they work in tandem, even on gentle braking and this is just a boring, simple pad issue.
View 18 Replies
Does this mean I need to see a mechanic. My car is a 97 buick century, 94kmiles. Rear brakes were replaced at 83k and front brakes were replaced at 80k. A few months ago, the noise began and has persisted once a day when brakes are applied first time of the day.
View 5 Replies
So I drove 400 miles today and when I was just about home I heard a grind when I applied the brakes on the freeway. Well I did a walk around the car to check all the pads and noticed my rear pads are almost gone. I'm not used to having the rear brakes implemented in so much of my daily driving, with the TCS and all.
To make it easy I'd like to keep all four corners on the same brake setup, I'm just not sure what is ideal on this car. I know OEM is gonna be said, but I upgraded my front pads to Hawk HPS'.
View 15 Replies
Is it just me or is this an ABS thing? during a snow storm i was going about 25mph and had applied the breaks and started making a grinding noise... if it is the abs how are you suppose to work with the response time for a quicker stop.
View 2 Replies
Right this clicking noise is really annoying me now, every time AFTER i brake i hear this click, the faster i stop the louder the click is, also when I am in neutral and suddenly rev its clicks sometimes but rarely, I am thinking it could be a loose exhaust somewhere? Its definitely coming from under my foot area. When I brake cornering it clicks too. Checked my control arms and everything, that's not rattling at all? Need to get rid of this click sound!!
View 3 Replies
2006 Sonata 2.4 GLS. My car has done 60000 miles and has developed a creaking/knocking (metal on metal clunk) sound at the left rear. it is only noticeable at low speeds when accelerating and decelerating in stop start traffic.
It is not the shock as I have removed the shock and driven the car and the noise is still there, I have also looked at all the bushes and nothing is obvious. I have also checked tightness of all bolts/nuts.
View 3 Replies
Coming to a left turn signal I was anticipating it turning red on me, and I drove into the turn lane briskly 30mph and then applied brakes as I made a u-turn. It sounded like a cross between dragging the front air dam and metal on metal brake grinding as I made the turn. Stopped immediately and did not scrap the air dam and all front end components checked out, okay. Car is driving just fine now, has only done this once.
View 18 Replies
I have 2008 Hyundai Sonata. I hear some noise from front wheels when i turn to right or left with breaks applied. There is no any noise when turning without break. the cv joint has been replaced but no any result. Still there is noise.
View 8 Replies
I got my Sonata at 27k, its now at 76k and the cars been great although I had the following issues.
I've noticed sometimes when I startup and shift into reverse the car jerks a bit and its not a smooth transition. However other times the car is very fluid in switching gears. Should I take it in to have a look at it?
Also when I am turning onto a unleveled road (usually a higher road), I notice a creaking/knocking noise coming from the front of the car, also notice it when I reverse into a parking space sometimes.
View 4 Replies
My Echo screeches when the AC is on. If I hit the gas, the sound will go away. Also, sometimes when I'm slowing down the screech starts with the AC on. Occasionally, the sound goes away after I've driven about 20 - 30 miles; it appears that the car at idle then is idleing a little higher. And, lastly, on very rare occasions, the screech will start when the AC is off and I turn a corner.
View 6 Replies
I have problem with left front brakes corolla. When I changed the router it was fine, but after few month, during down hill when I apply brake, right side make lot of noise. I cleaned pads and pin are good. It happens only on right side, down hill is problem.
View 2 Replies
When I gently apply the brakes at slower speeds there is a single "click" noise. This happens every time. I took it to the dealer. They said it was normal. I am just trying to find out if indeed it is. Do other people get this click when they apply the brakes.
View 19 Replies
I am new and just picked up a used 2008 Passat yesterday. It has 42k miles and what I had thought in perfect condition. I wanted to see what was going on before I took it into the dealership to get repaired. When driving I hear a constant whine / (like water is on in a house) type noise. Its noticeable all the time except when the brake is fully applied. It comes back once the brake is depressed and in park. I thought at first maybe it was just a brake pad rubbing but the constant noise in Park confirms its something else.
View 2 Replies
Guys, my 2005 V8 is giving me the annoying sign (making a squeal noise while driving that actually goes away when I apply the brakes) that my pads are wearing out. "Just brakes" quote me $89 to change the pads. That sounds too good to be true.
View 5 Replies
I noticed yesterday a sound, like a grinding sound, *sometimes* as I apply the brakes to stop. I'm at 68k. The noise only happens when the brakes are applied so I suspect there is an issue with my brakes again.
Some BACKGROUND info: At around 60k (or 8 months ago roughly), the front pads were replaced after the brakes were squealing and a pulsating brake pedal when stopping. The pads were replaced by a dealer. In addition, both front/rear rotors were turned at the same time. Rear pads had 40% at the time and were not replaced.
Some weeks later the pulsation came back and I went back again and they machined them again. For this current issue I was thinking about taking the car to someplace local (not a dealer) and getting a free brake evaluation of what is going on.
I'm also concerned that all this machining the dealer did to eliminate the pulsation may have decreased the life of the rotors and perhaps they need replacement now.
View 3 Replies
I have a 2008 Chevy Malibu. Lately when the engine is cold I will get to the end of the street and when I apply the brakes the car will make a clunking noise and a couple of times it has actually died and I have to restart the car. I only experience this the first thing in the morning, after that the car seems fine. I cannot tell if it is the brakes causing the problem or the transmission.
View 5 Replies
