Toyota - Camrysolara :: 2005 - Changing Out The Timing Belt At 66,000 Miles?
May 28, 2015
I have a 2005 Toyota camry solara with 66,000. Does the timing belt need to be done now due to age of the car?? Or wait alittle longer?
View 4 Replies
May 28, 2015
Advertisement
Opel - Corsa :: 2005 - Change The Timing Belt At 6K Miles?
I purchased a 2005 Opel Corsa C 1.8l with around 70k miles. The car is in a fantastic shape, I've had it for around 6 months, having driven around 6k miles. The first maintenance I did was changing all oils and filters, and changing the accesory belt (the one that powers the alternator, that one is not dented). I was told back then at the workshop that the timing belt (not sure if that is the correct name for the belt with dents that syncs valves, etc.) was in a good shape. I don't know if the previous owner/s ever changed it. I understand that the damage done when that belt breaks could get pretty serious, with bent valves, mainly. The question is, should I change the belt now? How long do those last?
View 13 RepliesCamry :: P1351 After Changing Timing Belt?
I recently changed the timing belt on my 2001 Avalon. I am now getting a P1351 code. I removed the timing belt covers and checked the marks, and everything lines up perfectly. I have checked this twice now. To give a little background, before I changed the timing belt, I was getting P0300, P0301, P0303 and P0305 codes along with a P1349. Upon looking up the codes, P0300 indicates a misfire on multiple cylinders, with P0301, P0303 and P0305 indicating misfires on cylinders 1, 3 and 5. The P1349 indicates a variable valve timing issue on bank 1 (cylinders 1, 3 and 5).
I had already changed all 6 coil packs and fuel injectors and spark plugs within the last year (iridium plugs), so I pretty much ruled out any of those. And since the valve timing code was on the same bank as the misfires, I figured that was the cause of the misfires. The oil level was fine, and it hadn't been all that long since I had changed oil. So the next possibility was the solenoid. I changed both of them. Since it was due for the timing belt, I decided to go ahead and change that too. Now, the P0300, P0301, P0303, 0305 and P1349 codes are gone. But after a day or two, the P1351 shows up. As I mentioned earlier, I took the timing belt covers off and checked the belt and alignment marks. All was perfect. I cleared the code. Within a few minutes of driving the code comes back. I checked the belt alignment again. Not loose, and marks line up perfectly. The car runs smooth as can be. I do notice that there is valve clatter on Bank 2. It sounds kind of like a diesel. But it is running smooth. It is also interesting that the original valve timing problem was on Bank 1, but the valve timing problem now is Bank 2. I have only driven it a few miles since the belt change. That's all it took for the code to come up.
Passat (B5) :: Car Died After Changing The Timing Belt
OK, so yesterday I changed my timing belt and all new components. I started the car before completely reassembling everything (bumpers, etc.) and it ran a little rough at first, then smoothed out. But this only lasted a few seconds and then it died out. I thought not much about it and finished my reassembly. Afterwards, the car would crank and crank and finally start. However, it would never idle smooth and it stalled out only after 1-2 seconds.
I did some investigation, and found the plugs all had wet oil on them. Changed them out and tried to start car with same results. Looked again at the plugs and they weren't as oily, but on their way. I looked all over for a source of this problem and found a broken "pipe" on the passenger side of the engine. It is black and sits behind a heat shield, directly under a larger black pipe. They both run from front to back. I think the broken one might be a vacuum line of some type, although when I plug it, nothing happens.
My fear is that I botched the timing belt job and subsequently, bent a mess of valves. But, I'm holding out hope for another cause of this dilemma. What is the smaller black tube/pipe on the side of the intake? The broken piece comes off a 90 degree elbow pointing to the ground. I'm guessing it was broken before the timing belt job, but who knows? Perhaps I broke it when I moved the radiator into service mode. Could it be part of the turbo? I thought that might cause the rough idle and stalling.
Oh, one other thing. When I last tried to start the car, I got a flashing "STOP" on the instrument panel, followed by something about the oil. The oil words only appeared for a split second before going away. Not even long enough for me to read the whole sentence.
Passat (B5) :: 2000 - Changing Timing Belt?
I got 102k on my 2000 1.8T Passat, ATW engine code. I'm thinking about changing the timing belt. Is there any way to check if it was done before. How to recognize factory timing belt?
View 9 RepliesPassat (B5) :: Timing Belt Replacement Every 60,000 Miles?
I was told that I must replace the timing belt every sixty thousand miles. Is this true?
View 24 RepliesVolvo :: 1991 Turbo 740 - Changing Timing Belt?
I am acquiring a 1991 Volvo 740 Turbo and am concerned about the need to change the timing belt. The seller does not have record of it being changed since he had the car for two years. He had only put about 10,000 miles on it since he had acquired it. It now has 186,000 miles and runs perfect and basically in good shape for its age. If the belt breaks does it ruin the engine?
View 2 RepliesJetta - Volkswagen :: 2002 - Changing The Timing Belt?
I drive a car I am extremely reliant on. I don't have money to buy a new one and I may be a bit over protective of this car. It is in excellent shape, I bought it with 96K and whoever owned it took good care of it. I changed the battery pretty much right away, and the auto parts store guy said it looked like it was the original battery. So I suspect the timing belt is original too, (along with the clutch, which works great BTW). I don't know anything about cars short of what I have heard on CT, but it seems there is a trend towards having to change the timing belt at 80-90K And I know that a worn out timing belt can have no symptoms and essentially ruin your car if it breaks.
I took my car for the blue plate special, and it has been to the dealer a couple of times for some repairs where they also do the general service and see if they can find something to charge me for and in all cases, my car had nothing they would identify and repair. Fluids are good air filters are good etc. When I took it to the little shop on the corner I got the same report, and when I picked it up I asked, well how does the timing belt look? And he said. I can't tell you, you would have to take it apart to find out. So my questions are, as I do not know if the timing belt has been changed by previous owners. should I just go for it and have someone change the timing belt as part of my regular maintenance plan now, or is there some nifty way to find out if it needs changing without having to spend an arm and a leg?
Golf V R32 :: Timing Belt And Chain Changing Kilometers?
Looking for info if the R32 has a timing belt or is it a chain and at how many kilometers shows it be changed.
View 5 RepliesPassat (B5) :: 2004 - Engine Is Backfiring After Changing Timing Belt
Recently I changed the timing belt on a 2004 Passat 1.8T and I realized I put the timing tensioner off by a few millimeters due to misunderstanding. I started the engine and it didn't sound very healthy. So I took off the timing belt and realized the tensioner was off by 8 millimeters. I corrected it and restarted the engine and it began back-firing. I re-checked and replaced the belt 3 more times and it still back-fired. The engine runs perfectly from a few seconds to a few minutes, then begins back firing and it stalls out. I had a recent post and I had suggestions to check all hoses, connections, etc. and to scan the computer for error codes. I did so and got the codes P0300, P0302, P0303, P0304. These codes mean back-fire in cylinders 2-4. I don't see any valve adjustments in the engine so could the valves be bent and do I have to replace them? God forbid D: Or do I have to reset some kind of computer code in the car or any other error that may need adjusting? All connections, hoses, wires, etc. are good. I've been a professional mechanic/technician for 25 years now and fixed cranes, bulldozers, semi-trucks, and anything else you can name that has wheels and is land based, all sorts of engines, gas, diesel, ethanol, you name it... I also worked on several VW's, including my own, and figured this V-Dub would be a walk in the park , but it turns out this Passat is the most complicated thing I've worked on in my life!
View 8 RepliesElantra HD (2006-10) :: 2009 - Replace Timing Belt Before 60k Miles?
I have a 2009 Elantra (automatic) that already has 52K miles on it. I drive a lot mostly at highway speeds. I know several people who recommend having the timing belt replaced BEFORE the warranty runs out at 60K miles.
The dealership has a 60K inspection where they "inspect" the timing belt (plus a whole lot of "fluff" checks, tire rotation etc) I'd rather just take it in and get it replaced. What should a timing belt replacement cost?
Civic - Honda :: 2001 - Timing Belt Replacement At 46,000 Miles?
My 2001Honda Civic EX (manual) has only about 46,000 miles on the clock and runs very well. My mechanic says I should consider replacing the timing belt (the manual suggests after seven years). I plan on keeping the car for many more years -- should I replace the belt now? How devastating is it if the belt breaks while driving?
View 5 RepliesSebring - Chrysler :: 2004 - At 90K Miles Should Change Timing Belt?
I have 2004 Chrysler Sebring base model 4 cylinder with 90,000 miles. Paid off long ago. The schedule says its time to change the timing belt but no symptoms. No other issues and have kept up the maintenance. The cost is around $1000. I need the car to last 2 more years until our new car is paid off. Should I do the repair or play the odds that it won't break down?
View 19 RepliesPrius (2004-09) :: What Is The Frequency For Changing Belts, Hoses And Timing Belt
I have a 2007 Gen II with 133,000 miles and am using Amsoil synthetic oil and an extended life filter, changing oil every 10,000 miles. What is the frequency for changing belts, hoses, and timing belt? Other than a faulty latch on the rear lid, I have experienced ZERO problems with the car and would like to keep it so.
View 6 RepliesPassat (B5) :: 2001 - Changing Timing Belt / Testing Damaged Valves
So, I got a 01 b5 1.8 5spd given to me was broken timing belt. The car is super clean with 226k on it and had been well-taken care of..oil changes Mobil 1 and such. the owner just got his $$ worth and drove it till the belt went, slapping then towed it to my shop. It did not overheat and he was not driving it hard. Now here is my real question...apars lapping on a new belt and crossing my fingers, what testing can I do to check and see if there are any valves damaged? Can't I do a compression test w/out the valve train in time right? Also, if there does happen to be head damage. I would be in the market for an AUG head, unless it's just a valve that can be replaced....
View 6 RepliesHonda - Accord :: 1997 - After Changing Timing Belt CEL Flashes / Won't Shifting Properly?
I took my 1997 Honda Accord with 97,000 miles to the Honda dealer for a 90,000 mile service and changing of the timing belt. I also had them replace some gaskets, some other belts and the axles as they were not holding fluid. When I got the car back the second time I drove it the check engine light came on and the car will not shift gears properly. When I start the car cold, put it in drive and accelerate the engine revs for a few seconds before the gears will engage.
This continues whenever I stop and accelerate. It also happens whenever the car is ready to switch to a higher gear. The engine revs past 3000 rpm and then will shift a second or two later. The dealer says I need to change a rebuilt transmission. The Bluebook on the car is only about $3000. I'm having difficulty evaluating the best course of action. What is the reliability of a rebuilt transmission?
GTI 337/20th Anniversary :: Timing Belt Same For 2004 Or 2005 GLI?
is the timing belt the same for the 2004.5 and the 2005 gli?
View 1 RepliesCamry :: 2005 - Noticeable Knocking After Timing Belt Change
I have a 2005 Toyota Camry with 120K miles that was bought used with 110K. The previous owner did not have the vehicle long and did not know if or when the timing belt had been replaced. I have read several blogs that recommend replacing the timing belt at 60 or 90K. To err on the conservative side I decided just to do it at 120K. Now my problem. Before the timing belt change there was a slight knocking from one of the cylinders. After the belt change the knocking is more pronounced. Q. How concerned should I be that the knocking is more noticeable? Could this be a by-product of the new belt and as it loosens the knocking will subside somewhat? OR, am I looking at valve job or worse?
View 8 RepliesHonda - Pilot :: 2005 - Replace Timing Belt And Motor Mounts?
Our pilot is 8 years old but has only 64, 000 miles on it. The dealership is recommending we change motor mounts and timing belt. Although the motor mounts don't seem to be broken and nothing is rattling we have to change the motor mounts due to the fact that the engine is moving more than an inch. Having said that in 6 months we have to put the pilot in long term storage for 3 years. Should we change the timing belt now given the low mileage and the long term storage situation?
View 11 RepliesSubaru - Impreza :: 2005 - Knocking Noise After Timing Belt Change
I have a 2005 Standard 2.5 RS wagon - nice little car.
So with that in mind, I had a local garage (trusted...dealership in this area is notoriously crooked) replace my timing belt, tensioner, idlers, thermostat, and water-pump last week. I've had the car back for about 3 days and I just noticed today, that while the car is idling, I'm hearing a knocking noise coming from the engine somewhere (could be while I'm driving too, but maybe I just not hearing it) - I don't recall this sound before bringing it in for the work. When I rev up the engine a bit, it goes away, but when the car sits for a few minutes, it comes back.
I've already had it back in since the change for a defective tensioner, which the garage replaced free of charge. I plan on calling them first thing Monday morning to bring it in so they can have a look, but in the meantime, what this likely to be?
Toyota - Rav4 :: 1997 - After Replacement Of Timing Belt And Water Pump Noise Like Metal?
I had the timing belt, water pump and thermostat replaced on my '97 RAV4. The next morning while braking at a red light I heard a rapidly repeating sound that sounded like metal on metal. The car never made that sound again but now I'm hearing a noise coming from the passenger side of the engine (timing belt side). When the engine is cold I don't hear it. After driving a while its starts, then once the engine warms up it generally goes away (except for this morning which was the coldest morning since this started, temps in the 40s).
I was only hearing the noise when the car was stopped either in drive or reverse (reverse sounded louder) if I lightly let up on the brake pedal (there's no pulsing in the brake pedal). Once under way the sound goes away. This morning it was making the sound virtually every time I came to a stop (once the car warmed up) even with my foot firmly on the brake pedal. I recorded the sound Saturday while standing still with the car in drive and my foot slightly easing up on the brake pedal. The sound starts at the 20:30 mark, what it could be?