Headlights work, done and door lights also work. Radio, door locks, and window controls do not. Car will no longer start and it doesn't seem to be the battery or starter, but I may be mistaken.
View 2 RepliesI have a 2005 Bonneville. Just recently the doors will lock and unlock on their own. The controls(windows/mirror) and lock on the drivers side works intermittently. The window and locks on the passenger side work correctly. At least I haven't found a time they don't work. Coincidentally, things started acting up after the drivers side widow was left open and a little rain came in. I have removed the mirror/window control panel from the drivers side, unplugged the connector, cleaned and put electrical grease on the contacts.. I did the same thing with another connector I could reach inside the door panel.
View 3 RepliesI have a 1993 F150 that I have been working on. I have a set of complete doors off of a 1989 with Power Windows and locks hung on the truck and need to figure out how to power them up. Looking for access to a wiring diagram that will identify the colors of the wires in the doors. I don't care about the auto down and all of that ... not going to try and convert the whole truck with comp and all ... just want to make these function.
View 14 RepliesI recenty was having some problems with my 2003 6.0 liter. My FICM connection was not seated all of the way which casued my truck to just die without warning....... AFter I had fixed that, my stereo died. Just dead??? Nothing...EVERYTHING ELSE WORKS???
So, after I had messed with everything I could think of, I thought, OK new DVD/Stereo time.
I checked fuse #32 which was the fuse to my stereo. The fuse is fine...BUT...There's no friggen power to the fuse via my test light. Test light works on other fuse spots so I know i"m not getting power to the fuse #32.
Since I don't have any power to this fuse....WHAT NOW???? How to trouble shoot this problem?
My landlord's daughter is having some electrical problems with her car, and we're trying to troubleshoot it ourselves. It's a 2006 chevy cobalt with 66,000 miles on it. Here are the issues: 1) The radio's display does not work (you can't see the time or the station). The radio's volume, on/off switch, AM/FM control, and tuner don't work. So, basically, it's stuck on one AM station and she can't do anything about it. 2) Her power locks occasionally lock / unlock themselves when the vehicle is running. 3) This is the most important safety issue right now - there's no power to the pump for her windshield washing fluid. What could it be? Fuses? Wiring? Something else?
View 4 Replies2005 Grand Caravan with 160K miles. Automatic door locks started not working two years ago and needed to be reset by either disconnecting the battery or pulling the fuse. First this would happen every six months, then about every three months, then monthly, and now about every two weeks. Is there anyway to avoid having to reset the system every two weeks?
View 3 RepliesHaving problems with their door locks attempting to activate when turning the ignition key? If so, how can I correct it or make repairs.
View 4 RepliesI have a 04 explorer I have been trouble shooting and the master switch works all but the passenger window wont work it at all but all the others work fine, its not the switches replaced both, the passenger window switch will roll the window down but not back up. I checked for power there is power to the switch in the passenger side, the ground is good. I can pull the plug off the motor and hook a jumper ground up and the switch will make it go back up. I have been working in body shops for 40 years and now this is the first one to stump me
View 7 Replies1997 Ford Expedition 4x4
When I push the switch for the drivers window I can hear the relay in the fuse block make a click but window doesn't move. If I push the switch for any other window (on the drivers door or any other door) no click at the relay and no window movement. I've swapped the relay with other relays in the fuse block but nothing changed.
I've tested the driver side window motor by running 12 volts directly and the motor works fine. When I press the PDL switch I hear a buzzing sound coming from the passenger floor area behind the glove box but the locks do not go up or down. I started the truck and when I put it in gear I can hear the PW relay in the fuse block clicking repeatedly. Put the truck in Park & the clicking stops.
I was told (on another forum) that the problem is most likely my GEM module. Bought a used 1 on eBay and installed it today but nothing changed.
I have a 02 Buick Lesabre. The door locks and windows won't roll up or down anymore. I have checked and replaced the 30 amp fuse for power windows and also checked and replaced the window door switch for the drivers side and still nothing works. What else could it be?
View 5 RepliesJust this evening I turned off my car (2000 Toyota Corolla), went inside and then came back out an hour or so later to discover that my radio, clock, and cigarette lighter still had power. Without the key in the ignition, I'm still able to listen to the radio, for example. This was never the case before. I had the battery replaced five days ago, but I doubt that makes a difference.... How I can fix this so that my battery doesn't drain.
View 2 RepliesRepaired my locks on my F350. Had the motor reversed. Before I figured that out I thought I needed to change the wires in the plug. Changed them and it didn't work, put them back and now the switch on that door does not work for the lock; however, all other switches work. What do I need to fix?
View 2 RepliesI have a 2009 Camry Hybrid. Both driver side door locks work/fail intermittently. This sometimes does/doesn't happen when i use the inside door panel button, outside door button, outside hand sensor when i grab the door latch, remote control buttons, gear shift . . . etc. I see the driver side locks open/close or not move while I see the passenger side doors lock/unlock correctly.
For some reason, it seems to be a bit better when the weather gets warmer around hear in the northeast. I thought it might have something to do with the integration relay. But I'm not exactly sure where it is. I looked under the dashboard, too many wires!. On the drivers side I have located the fuse box, unplugged most of the wires, plugged them back in and it seemed to work only for a day or two, but the temperature also warmed up on those days.
It's under the hood or inside the car
View 2 Replies2004. Hazards and brake lights work.
View 6 RepliesInstalling a remote start and everything says to use gray/yellow, however that wire only gives a pulse when the lock buttons on the doors are used, not on the fob. I need the wire that gives a negative pulse when the lock button on the fob is pressed.
View 14 RepliesI am trying to add courtesy lights to the existing reflectors in the front doors of my supercab. I can't find a wiring diagram that shows where to connect the light sockets. 1999 F250 SD...
View 2 RepliesI need to hook up a lamp for my mechanical oil pressure gauge and tested all the fuses, they are either on or on with key in run position, but I found none that went on with the lights, which of course is what I need. So now I guess I start randomly sticking needles in wires under the dash and testing for a possible light switch dependent circuit? Or run a wire through the firewall and tap a wire near a running light? There's got to be an easier way, but my Haynes manual seems useless--one wiring diagram for 1995-2008. I will be forced to run it off a key on circuit which means the lamp will be on anytime I drive, day or night, unless I install a toggle switch--not the best way to do it though.
View 3 Repliesa buddy of mine has a 12 F250 that he bought new and is ready to add power locks and windows. I know we can get some aftermarket kits for both but he wants to use the factory door panels and switches from a power setup. I am sure we could use the factory window regulators and panels and just use and aftermarket wiring and flush mount switches. I had figured the wiring might be in the jambs but not in the doors, but when I pulled the trim back, we didn't find any extra wiring going to the rear doors, its a crew.
View 1 RepliesOverdrive fuse keeps blowing. Drive one and 2 shifts fine. 3 and overdrive don't work. Had transmission checked it is fine. Repair shop says it is electrical.
View 1 RepliesI want to add a CB and some flood lights to my pick-up, but am getting tired of hunting for wires that are constant hot or switched hot under the dash. Not to mention the rats nest of wiring that results, and the potential for overloading the factory wiring.
Above is a diagram that I came up with while trying to figure out how to add a constant hot fuse block, and a switched hot (or ACC) fuse block to the truck to clean up the wiring.
Am I using the relays in the right way? (Never used one before)...