Subaru - Legacy :: Sputter And Check Engine Light Will Blink On At 60 Mph Or Above Sometimes
Jan 27, 2011
My car will drive fine, then @ 60 mph or above sometimes it will sputter and the check engine light will blink on. I brought it to my mechanic and plugged it in. Miss-fire on some spark plugs. They replaced all spark plugs and wires. The car is sill doing the same thing. My mechanic plugged it in again and now just a miss fire on #2 plug. (even after new wires and plug) Only seems to happen once the car is warmed up. If left sitting for 15 hrs the check engine light goes off completely. Only to come on again, after driven 25 or more miles. What could be wrong?
View 10 Replies
Advertisement
I bought my Subaru in 2004 with 14,000 miles on it. The check engine light began coming on soon thereafter. The Subaru dealer has replaced my catalytic converter (the so-called problem) -- 3 TIMES up to 85,000 miles. The check engine has continued to come on and it goes off since then. Mostly, it's on, but now and then, it goes off. I bought my own diagnostics kit because I got tired of taking it in every time the light came on. I'm told it's the usual problems plus they usually have me get the oxygen sensor repaired. I've also been told to make sure my gas cap is tightly closed. Still the check engine light continues to come on and now and then it goes off (it's currently "on").
View 4 Replies
Had an issue with "check" engine light turning on and "cruise" control light flashing, intermittently. Dealer said we had dirty oil contaminating some solenoid valves in the system but we had just done an oil change and do so every 3-5K (car has 170K). They recommended switching around the sensors and doing an "oil flush" with another oil change. The warning light problem hasn't recurred, in the past month, since we started giving the gas cap a few extra turns after a fill-up. We're getting ready to buy a new car and don't want to give what might be a serious problem over to the next owner.
View 6 Replies
When I turn the key all the way over, I hear only one click, and no engine sound. Playing with park or neutral positions do nothing. Battery and connections are good. I am getting a raw fuel smell out of the tail pipe after it finally starts. The check engine light intermittently comes on, by now it is mostly on.
My guesses are: fuel pump/relay problems, starter/connection problems.
View 7 Replies
What would cause the vechile to die randomly, while driving? have check all ground wires, coolant, spark plugs, air filter, and changed fuel filter. no check engine lights come on.
View 2 Replies
My mechanic can't find the problem. Engine light comes on. Along with the flashing cruise control. His diagnostic doesn't show him the exact problem as the voltage changes. He has checked everything related, changed out the bank 2 sensor 1 oxygen sensor, but can't find the problem. I don't know the diagnostic code. But he says that it doesn't give him an exact code. Can only the dealer do this? Car runs fine.
View 10 Replies
So, my check engine light has been on for months. I knew that I needed a new oxygen sensor (block 1-pre-cat), so I replaced it today after the car began to sputter and misfire. Well, I thought that would fix the problem, but it hasn't. Some of the hesitation is gone, but the sputtering is still very bad. I'm going to replace the spark plugs tomorrow and see if that works. I was also told to clean out the catalytic converter, but I don't know how to take it off. It wouldn't hurt to just bang out all the debris. Any DIY on taking off a catalytic converter for a 2000 VW Golf GTI 1.8T?
View 7 Replies
I changed my plugs a few days ago on my 96' Taurus GL 3.0LI checked under my hood to check the recommended gap size and it said .42 to .46.. I went with .46. after putting them in i started the car up just fine, but later in the day i noticed when I came to a stop at a red light my car would sputter and my check engine light would start blinking. When I'd accelerate and drive it again everything would clear up and the light would stop blinking. I didn't change the wires, just the plugs in case you were wondering but I am unsure of how much that would influence my problem. Today after work i had a little trouble starting my car. After a few tries it started and my exhaust smelt rich in gasoline. Did i gap them too much? Should i get new plugs again and regap them? should i buy new wires also?Is my ignition coil going bad?
View 19 Replies
So I drive a 2001 civic 5-speed and recently my check engine light doesn't go off right away after I start my car. It'll blink for a good 5-10 seconds then stops. Thought it might be the oil, changed it didn't do anything. What it can be?
View 19 Replies
Today I got the engine light blink a couple of times and then steady on. Parked the car, waited a few minutes, start again just the engine light on (not blinking anymore).
I scanned the car and got this
VCDS-Lite Version: Release 1.2
Tuesday, 06 August 2013, 13:48:09:11637
Chassis Type: 3D - B5 VW Phaeton
Scan: 01,02,03,05,06,07,08,09,11,15,16,17,18,19,23,27,34 ,35,36,37,38,42,46,48,49,52,55,56,57,61,62,65,68,6 9,72,76,77
-------------------------------------------------------------------------------
Address 01: Engine Labels: None
Controller: 07C 906 018 C
[Code] .....
I have a hard time believing that all coil packs went bad. My wife told me that when she was driving the car she could hear a clicking noise coming from the trunk so I think this could the fuel pump not giving enough fuel but I was hoping to get an error for it.
View 11 Replies
Wifes car began to idle very rough and check engine light began to blink and beep, I took it to the mechanic today and he informed me that my control module was no good and it was a $400 dollar piece. I said go ahead get it done, cuz she needs the car and i couldn't afford to not have it done immediately. Question I have is does this small-ass piece really go for that much on average and what control module is it?
View 4 Replies
So I have a 95 Legacy sedan, FWD. It's been a kind of problematic car, and the engine was replaced about 5 years ago (I assume with an old unit, but I'm not sure though because though I was in the family I wasn't driving it then). But, it's held up and has continued to be at least roadworthy. But recently, it's developed an issue where the engine will just randomly die while I'm on the road. All/most of the dash indicator lights come on, but if I shift it into neutral and turn the key, it'll come right back up. Occasionally it'll die again almost immediately, but usually it'll be fine for at least a while. And anecdotally, It seems to happen more frequently at lower revs such as idling at a red light (though will occasionally happen while I'm moving), and when the engine is cold - generally once I've driven around for a while, it's not a problem anymore.
View 3 Replies
I had a Check Engine Light a couple months ago, and I took the car to the garage to have it checked out. They told me they got a Fuel Pressure Sensor malfunction code, and that the sensor had to be replaced. I did so myself, an it is ridiculously easy, and the car worked fine. I noticed the Check Engine Light blinked a couple of times while I was driving, but never got steady. A couple of days ago, it did. Out of a bad gut-feeling, I purchased a ODBII scanner, and I scanned the car myself. I got the same error code as the garage did, but the sensor should be fine.
View 5 Replies
What are the common misfire problems with the mk4 R32? My R is acting funny every once in a while it runs perfect then some other times it seems to big and the check engine light starts to blink but doesn't stay on I ran for codes and it said I had a miss fire but after that the code never came up again but it still blinks.
View 7 Replies
I drive a 1992 Mazda Protege. Recently had an oil change and put in new air filter. Recently the check engine light has been coming on. Sometimes it will run rough and sputter a bit when the light flips on and then runs normal after the light flips off, sometimes it seems to run fine when the light comes on, but the light does go off and the car runs fine after it has been running for a few minutes. Shortly before I had my air filter and oil changed I did have an incident at a stop light where the car died and did not restart for a full five minutes, at which point it sputtered for a bit and then got me home.
I took into the local mazda service center and dealer (they were the only ones who had the right kind of connector to pull the error of a car this old), and they said the only code coming up was a p69 which indicated a bad thermoswitch. I have already paid for it but the parts won't be in until Saturday. I have until then to cancel the repair and just pay restock and the original diagnostic fees. Should I go through with this repair, or do the symptoms described indicate something else?
View 2 Replies
My 2002 Windstar SEL has been giving me a fit and I`m not getting any codes as to why. Here`s the 2 main issues. Clicking when i go to start up in a.m. if it`s below 50 degrees. ( Battery has been checked and all is o.k. or so I was informed). As long as it`s warm it starts fine every time. Also,it seems like the least bit of wet on the underside will cause it to spit and sputter and the check engine light will start blinking until it sits and dries for a while. (A very shallow puddle less than 6 inches deep at low speed or even the automatic car wash that sprays the undercarriage).
View 2 Replies
1995 Subaru Legacy wagon.
If I drive up a steep hill for 5-10 minutes, the engine will smoke copiously.
It's fine when I drive 200 miles over lightly rolling terrain.
The temperature gauge doesn't get above medium.
It's been doing this for at least two years (since I bought it from a friend).
What's the story?
View 12 Replies
I've got a 2006 B9 with about 64,000 miles. Just a bit ago my check engine and ABS light came on, along with my cruise light flashing.
After researching a little bit on the forums and couldn't find an answer, I took it into the dealer, to which I was told that there was a bad oil pressure sensor for the right-hand side of the motor. I had them replace it out, and less than 20 miles down the road, the same lights appeared on my instrument cluster, and I took it back to the dealer. They informed me that there was now a bad sensor on the left hand side that would be another $380. I scheduled an appointment for later next week, and had them reset the error.
On the same day, about 2 hours later the lights reappeared on my dash, and I took the car over to a local parts store, where I used their scanner and the car now spit the following errors:
Camshaft position actuator A - Bank 1 timing over advan.
Camshaft position actuator A - Bank 2 timing over advan
Cam/crankshaft pos. correlation sensor A - Bank 2
Cam/crankshaft pos. Correlation sensor A - Bank 1
Camshaft position actuator A bank 1 timing over - advan
Camshaft position adctuator A bank 2 timing over -advan
Cam/crankshaft pos correlation sensor A - bank 1
I reset the codes, and waited another day for the lights to reappear on the dash. Again, I rescanned the errors, and found the same top 5 codes that I listed above.
Is there something more major going on here with the computer?
View 5 Replies
I have a 2007 L.L. Bean Edition Forester. The cruise light is flashing and check engine light is solid. I am well into my retirement age and nearest dealer is about 2 hours away. Is this something that local mechanic can fix? He is very good, but not Subaru schooled. I'm afraid to drive it now.
View 2 Replies
What are reason for the check engine light to come on and off and when a different person drives it. When it comes on? I guess I am looking for other opinions when I drive it I drive it respectfully but the owner bit of a speed lover.
View 14 Replies
So after hitting a deer in my car a few weeks ago I fixed it and drove it around town a little bit and it ran fine. But 15 mins onto the highway the next day it overheated. It was out of oil, which I had checked a couple days before when I fixed it. so after it had cooled down I filled it up with Coolant and oil and started driving it home. the roads where bad and I wanted to go easy on the engine so I took it at about 25-30 MPH. as I was driving it would slowly overheat, but I could get it to start cooling down but dropping it into neutral and just letting it idle while I coasted. I had to get off the frontage road and take the highway the last couple miles before town so I turned the engine off and let the fan run for about 20 mins, and started off again, the weird thing was when I got on the highway I was doing about 55Mph and the engine didn't try to overheat at all, but as soon as I got back in town and started doing 25 again it started overheating again. another thing that is happening is that the car will blow air through the heating system but won't heat it. I realize that was long but I'm really at a loss. I replaced the head gaskets less than a year ago so it's not from worn gaskets.
View 4 Replies
