Subaru - Impreza :: 2007 - CEL Suddenly Comes On And Cruise Control Light Starts Blinking
Mar 7, 2012
So I'm driving along with everything fine till I pull into a neighbors driveway to drop off some stuff. As I pull in, the check engine light suddenly comes on and the cruise control light starts blinking. As I have a scangauge II always connected, I put the car in park and check the code. It comes up as P0000. I get on my Droid III and google it - all I see is "null code" so I clear the codes and everything is fine. I figure "that's odd, but whatever". I drive home (about 1000 feet) and park and shut the car off and go inside to mull this over.
I go back out to check out the scangauge again and it requires starting the car to read out the codes. The car won't start. The battery is fine, and in fact it does the "rurrr rurrr rurr" strongly for 10 times before I figure it's not starting. I wait about 30 seconds and try again - same thing. I wait about an hour or two and try again and it starts this time right away, but then stalls right away. Start again and manually give it some gas and it keeps idling weakly. I'm able to back out and drive a short distance and come back without a stall. I let it sit for the weekend (no shops open anyway) and start it monday morning with my AAA card out... and it starts fine and runs fine all day. I basically forget about it.
About a week and a half later, I'm driving along a country highway at 55 Mph, and the same thing happens. Check engine light, cruise control light blinking and the cruise actually cuts out so I'm losing speed suddenly. I run the scangauge again and same code. The car keeps running fine though, I'm able to drive it back (w/out cruise control) the 5 miles home. Nothing out of the ordinary.
I go inside and google this some more, and there's some posts about the Scangauge causing this - but I've been using it for about 4 years w/out this happening. That said, about 2 months ago, there was a recall, and they flashed the ECU with some update so maybe that changed something, but still - worked for months before this happened. I had to get to work etc so I just cleared the code again, and so far 3 days without a recurrence. Currently I'm thinking about waiting to see if it happens again and going to Autozone and have them read the code to see if it really is the Scangauge not reading the code right or whatever...
View 3 Replies
Advertisement
I have a 2007 subaru outback ll bean addition with 67,000 miles. For the past year and a half my gas pedal has intermittently become unresponsive. The engine is running just fine but the check engine light and cruise control light start blinking and boom-no gas. After turning off the engine, the car won't start until the gas pedal has magically started working again. The dash lights continue to blink for several starts but then stop.
Prior to this problem, I have noticed that sometimes the console lights for the radio and AC blink and sometimes go dark at which point the controls are ineffective. As if this wasn't enough, just yesterday when trying to start the car, the engine was having trouble turning over with a rapid clicking noise. It eventually started but now the seat belt buckle alarm is out of whack and the speedometer displays "ER U1."
View 10 Replies
My 2005 Subaru Legacy 2.5i - the engine light is on and the cruise control light is blinking. This happened once before and it went away after I recapped the fuel cap. However, this time it did not work. The car is running ok.
View 4 Replies
At a bit over 43K miles the check engine light came on with a blinking cruise light. Dealer has confirmed that both secondary injection pumps have failed for reasons unknown. I think this is part of the pollution control system.
View 3 Replies
On my 2007 Subaru Forester (100k miles) the CEL light is on and my cruise control light is blinking (cruise control does not work in this condition). Computer scan indicated front O2 sensor failed and my mechanic replaced it. No joy. Computer scan reported 0 data from EGR valve--replaced it. No joy.
View 2 Replies
I bought a 2005 subaru forester xt a cohple months ago and then the CEL went on and the cruise control started blinking. The car also shook horribly. Long story short, and $2,300 later, i got the "head gasket set, water pump, timing kit, oil&filter change, " etc... Fixed. Question is, I am driving to Colorado from Maine in about two weeks. How long do subarus last after such repairs? Think ill get a few years out of it? Or should I sell it and buy a more reliable car before the trip out there.
View 11 Replies
My 2010 Subaru Outback recently surprised the hell out of me by simultaneously turning on the brake warning light, the traction control light, the check engine light and (just for a bonus!) disabled my cruise control while flashing the cruise control light. I pulled over, quickly surmising that all of those systems could not have failed at 70 MPH without instantaneous death to either me or the vehicle. Both apparently still being alive, I tried turning the car on an off to reset the lights. No go. Subaru was not going to miss this chance to get me to the dealership! (who I had avoided to this point!) As I was far away from home and the car being very healthy, it seemed, I decided to drive on. I proceeded to put a couple of hundred more miles on the car before I got back to town.
My car had 39,000 miles on it, 3,000 miles beyond the warranty end. I learned that I have an error code of P0171, "Fuel Trim Malfunction (Air/Fuel too lean)". So I guess I'm wondering about a few things...why would this sensor set off every light on my dashboard and disable my cruise control? Seems a bit overblown for running a bit lean. My gut tells me Subaru has a sensor/software problem they are not owning up to. I'm a big fan of conspiracy theories and this really smells like one...
Second, jeez, I'm only 3K miles over warranty, don't you think they'd cut me some slack. I mean I love my Subaru, or did anyway, until this happened. Now it's just another POS car that breaks for no apparent reason...
View 10 Replies
My 08 altima cruise control comes on and the set light keeps blinking the service book says take it to my dealer is there anything I can do to fix it myself could it be a air leak or something?
View 1 Replies
This has happened only once the other night. I was cruising about 50MPH, hit the brakes for a red light, while I was at the red light the Cruise Control light started flashing. The cruise control would not engage at any speed during the flashing stage, and I didn't think it would as a flashing light usually means a malfunction. I went a few miles turned the car off, restarted it and haven't had a problem since. Just chalk this up to a 1 time glitch?
View 8 Replies
I have a 2005 Prius with 84k miles on it, I recently purchased it used w/ 82k miles.
While driving, about 15 miles into my drive the check engine light starts blinking with acceleration (I counted as many as 18 blinks in one time). The traction control light also came on a few times. With acceleration, the car shook. I was close to an advanced auto parts, so I went there hoping they could work. They were unable to have the connector sync with the car.
I ended up calling my girlfriend and asking her to look on this site for problems as I described. She found and read me info such as water leaking into the spark plugs (it did just rain allot yesterday) and bad gas. To my surprise, there was really no clear answer.
I called and got it towed to the Toyota dealer. The dealership just called and said they did a quick scan, and it "appears not to be from bad gas" but more testing will be done tomorrow. Would it be worth it to drive up and try some fuel water remover tonight? I also read on changing the spark plugs isn't too hard?
View 18 Replies
I have a 2005 Subaru Outback with 179,000 miles on it. My engine and cruise control lights flash on and off....have been doing this for 6 months now....intermittently. My mechanic said the he cleared the computer and to wait and see if it happens again. He said that it might be the catalytic converter. The car runs fine whether or not the lights are flashing.
View 3 Replies
Had an issue with "check" engine light turning on and "cruise" control light flashing, intermittently. Dealer said we had dirty oil contaminating some solenoid valves in the system but we had just done an oil change and do so every 3-5K (car has 170K). They recommended switching around the sensors and doing an "oil flush" with another oil change. The warning light problem hasn't recurred, in the past month, since we started giving the gas cap a few extra turns after a fill-up. We're getting ready to buy a new car and don't want to give what might be a serious problem over to the next owner.
View 6 Replies
I took our '99 Mazda Protege in for a clutch replacement. The mileage is over 150k. The car was returned with the air bag light blinking and the cruise control and horn deactivated. All were fine beforehand. The shop eventually admitted that they could have broken the clockspring during the repair. They are going to get back to me tomorrow with a quote for the repair and they told me they are going to "work with me" on the cost. I don't understand why I should pay for anything associated with the clock spring repair. Another mechanic told me they had to secure the steering during the clutch replacement and probably forgot to do it, furthermore they should cover 100% of the repair.
View 19 Replies
I have a 2006 2.5 limited turbo outback wagon. Recently the engine light came on not flashing..the cruise control light is flashing. I live in a very remote area over a hour away from a dealer ship..and having problems finding someone with a diagnostic tool..Am I damaging my car by driving it still..I did just prior to the lights coming on filled the tank and after checking the cap I realized I did not tighten it as I should have.
View 6 Replies
I have a 93 Aerostar 4.0 and it is displaying the blinking airbag light (3-2) and the horn doesn't work and the cruise control failed. I believe it is the clockspring ...
QUESTION: Can the clockspring be repaired or must it be replaced. I do not have a schematic of the electrical components of the clockspring ...
View 9 Replies
My mechanic can't find the problem. Engine light comes on. Along with the flashing cruise control. His diagnostic doesn't show him the exact problem as the voltage changes. He has checked everything related, changed out the bank 2 sensor 1 oxygen sensor, but can't find the problem. I don't know the diagnostic code. But he says that it doesn't give him an exact code. Can only the dealer do this? Car runs fine.
View 10 Replies
I have a 1995 Subaru Impreza that I have been nursing along for the past 14 years. Recently, if I drive for a decent length of time (~10 miles), turn the car off to go into a store, and then try to start it up again, it won't start. It turns over fine, but never fully starts. If I let it sit for 20-30 minutes, it will start back up again. The temperature gauge reads normal--between hot and cold. Is there another temperature sensor that might be malfunctioning, telling the car that the engine is too hot to start? Where/what is this called?
View 6 Replies
I just bought a 2006 Subaru forester with 130K miles. Recently, the check engine light came and at the same time the cruise control started flashing. I brought it to the mechanic who said I had a bad catalytic converter. The car seems to be running just fine and now a day later the engine light is off.
View 3 Replies
I have a 2007 L.L. Bean Edition Forester. The cruise light is flashing and check engine light is solid. I am well into my retirement age and nearest dealer is about 2 hours away. Is this something that local mechanic can fix? He is very good, but not Subaru schooled. I'm afraid to drive it now.
View 2 Replies
I was changing my oil yesterday and noticed a significant amount of oil residue on a bracket located approximately at the center of the front axle, to the left of the oil pan. I'm confident the leak isn't coming from the oil pan, drain plug, or oil filter, based solely on the location of the buildup, but I was not able to see specifically where the build originated. As this is a Boxer engine, my concern is that the underside of one of the head gaskets may be leaking. My only reservation about this theory, however, is that I haven't smelled any burning oil or witnessed any gray smoke.
Unfortunately, I haven't paid close attention to the oil levels in recent moths, so I can't say definitively whether or not the levels have fallen since the last oil change.
Where the residue is coming from and if it's a problem requiring immediate attention?
View 6 Replies
I have a 2012 Subaru Impreza 5spd, I bought it new about a year ago and every +- 2000 miles my low oil light comes on. The Subaru dealer is telling me this is normal. After happening 5 times in the past year I am getting fed up and believe there is something wrong with the engine. I Know many people with newer Subarus and none of them are having this issue with the oil light. When the light comes on and I check the oil I see that I am a full quart low, the dipstick comes out dry. The dealer has been insisting that this is consumption is normal. I finally called corporate last week and when they returned me call they told me that after contacting the dealer there was no evidence of low oil levels.
I attribute this to the fact that the dealer told me to top the oil off before driving, so of course the oil levels will appear fine when I bring the car in the next day. Regardless the woman from subaru corporate told me that consumption of a quart within 1200 miles is abnormal, however, she never said that it was normal for consumption rates of a quart per 2000 miles. So is this rate of consumption normal, and should I be concerned? There is no leaking oil that I can see, also where does the oil go in a closed system? I don't smell burning oil or see any smoke in the exhaust. I have begun carrying oil with me due to the frequency of this and am scared to drive it when the light comes on because I feel it will damage the engine.
View 19 Replies
