Subaru - Forester :: 2002 - Gear Shifter Is Very Loose
Jun 14, 2011
I've a 2002 Subaru Forester, manual transmission. The gear shifter is very loose. While in any gear, the shifter can move to anywhere. For example, when in second gear making a left turn, the gear shifter will flop to the right side near where third or fourth gear are. This doesn't change the gear of operation that the car is in. It just makes it a bit of a challenge to find where the gears are. Sometimes it is a challenge to find reverse.
We've had the shifter bushings replaced and that tightened things somewhat. But it is still very loose.
Mechanics have said that there is nothing wrong with the motion or the way the linkage operates the transmission. So the problem seems to be in the gear shifter.
Is this common on this car?Is it a sign of a bigger problem?What can be done about it?
View 1 Replies
Advertisement
Okay, so I am not really sure where to post this. I have one of the weird 1999 F-250s that aren't a SD. The shifter is pretty loose, about 4-5 inches of play while in gear. Shifting isn't a problem, just the play in the shifter that I worry about. I have been trying to find rebuild kits, but can only find stuff for Rangers/Mazdas.
View 7 Replies
My son has a 2001 Forester that's engine will from time to time suddenly rev up while driving on the highway as if the clutch was suddenly disengaged. The clutch only has about 20,000 miles on it and there is no burned clutch smell. What else could this be?
View 7 Replies
On my 2002 Subaru Forester (137,000 m), the check engine light came on. They diagnosed and repaired O2 sensor. About 300 miles later it came on again, this time they said the catalytic converter was cooked, and they blamed whatever caused the O2 sensor to fail (or the O2 sensor failure itself). After the repair (about $1300 and 30 miles later), I discovered that the engine oil was so low that it was not showing up on the dipstick (tho the oil light was not yet on). The shop (after admitting that they did not check the oil while it was in there) said it was related to catalytic converter failure. Does this make sense? I have only gone another 60 miles since the oil was refilled, but so far it looks OK. Should I be on the look-out for anything else?
View 16 Replies
Engine light came on two weeks ago. Had the code read at Advance Auto Parts. Code = P0420. The only performance issue was that it stalled when I started it the other day for the first time since I bought it last fall. Are there any other clues to tell what it could mean (catalytic converter vs. 02 sensor vs. anything else)? Is it really worth trying some kind of catalytic converter cleaner product?
View 1 Replies
I have a 2002 subaru forester that will stutter and backfire without throwing a code, but not all the time. i have had it hooked up to a computer to check the O2 sensors and they are fine, it has a new Throttle position sensor, knock sensor, plugs, and catalytic converters (all put on in the last month). I have called a dealership and they have not heard of this happening, so this is my last resort.
View 15 Replies
my girlfriend has a 2002 forester and it is making a very loud noise while driving, sounds like a helicopter coming from the front/right. when you let off the accelerator it changes pitch and sounds like more towards the middle...checked for axle play or anything rubbing and things look ok...very confused, i'm a former VW tech and i've never heard this noise before
View 7 Replies
Replaced original clutch on Subaru Forester at approx. 130,000 miles because of slipping. Drove car for a few days and clutch would judder once warmed-up when trying to engage 1st gear. Took car back to repair shop, they said pressure plate was defective/set too stiff and replaced that. Whole car now shudders when trying to engage in 1st gear once the car has warmed-up and particularly on (even a slight) hill. What's not working correctly? Seen some discussion on throw-out bearings, master/slave cylinders and oil on clutch. Unsure.
View 5 Replies
I have a brand new (2 months old) 2011 Subaru Forester 2.5x that has a 4 cyl engine and a 5 speed manual transmission. This past week it's been cold here in New Hampshire and in the morning when I first drive the car, I have trouble shifting from 1st to second gear. When I shift from 1st to 2nd, I hear/feel some grinding noise as I try to engage 2nd gear. This only seems to happen when the car has been sitting around in the cold for a long period of time. Our garage has been cold (34 deg this AM) for the past week and when I drive out of our driveway and on our street I encounter this problem.
Normally, this problem only happens the first time you shift out of first and into 2nd. However, the other day, when it was very cold (5 degrees out) it happened several times as I drove down the street. After it happened the first time that morning, I stopped the car and drove from a dead stop, shifting from 1st to 2nd. I had problems 3 or 4 times trying to shift to 2nd. I ended up double clutching the car to avoid making the grinding sound. I took the car to the dealer. The couldn't repeat it but I didn't expect it to, because the car was warmed up and it was warmer during the day (low 30's by the time I got to the dealer that afternoon). The mechanic changed the transmission oil and checked the magnet in the pan to see if there were any metal pieces. He did not find any metal pieces. That was two days ago.
Unfortunately, every morning since then the car has had the same problem. Once the transmission has been warmed up it runs flawlessly and I have no problems shifting. I've made sure I am fully depressing the clutch for each shift. The past few days I've been taking the car out on an early morning test run and like clockwork, it has problems on the first shift into second, and it usually works fine after that. I have an appointment next week to leave the car with the dealer overnight. They will test drive it to see if they can reproduce the problem. What might be wrong? I have a workaround solution to avoid grinding the gears. I simply double clutch shift into 2nd for the first few times that I shift after the car has been sitting in the cold for a while. However, this is less than ideal for a brand new car.
View 9 Replies
I have a 2013 Forester with 39k miles, and last week I was 200 miles from home, put it in Drive and it didn't engage. After car was left running for a few minutes, and shifting between P, R, N, & D, it finally engaged. I was able to get it home and took to dealer the next day. They looked at the car, checked the computer logs, and told me nothing was wrong. Since then, it's happened 3 more times, and now I'm noticing it's not shifting smoothly from 1st to 2nd gear (engine will rev and then it'll slip into gear).
To make matters worse, my wife couldn't get it out of Park two days ago. She had to use the shift lock release button, and could only start it when it was in Neutral. She then couldn't get it to back into Park and had to park it on a level surface with parking brake engaged. Heading back to dealer now, but would love to hear others' input.
View 8 Replies
2002 F350 5.4 . I did some plowing today, truck ran Great, but noticed the Auto Shifter starting to get some play in it, 185 k on it. I recall reading about how to tighten it back up.
View 3 Replies
Out of the blue, our Headlights and Parking Lights would not switch on. Checked the fuses--OK. Tested the Relays--OK. Tried a used switch from my mechanic--no change. In the course of doing that, the Parking Lights came on and would not turn off. Tried disconnecting battery, locking/unlocking with the remote and starting it with the remote--no effect. Had to remove lightswitch 20A fuse to turn the P-lights off. Signals still work ok--with either switch. The car does have a HarmonKardon satellite radio which I've never used but have to turn off every time I start the car. I believe it has some sort of security system which annoyingly flashes a red button which sticks out of the dash.
View 1 Replies
I have a 2002 Subaru Forester L with 178,000 miles on it. I just had the valves adjusted. I have replaced the coil pack, #2 injector, plugs, wires, and throttle position sensor. I have also cleaned the idle air controller. The car only shows sign of a miss when it idles. It gets great gas mileage otherwise. I am at a loss on what to do next as the car doesn't have a MAF sensor, I can't do anything with it.
View 19 Replies
I have an 02 Forester that has 413,000 miles. It needs appox 2 qts of oil @ 4500 mile intervals. Is that too much? Is it going to start needing more oil sooner? I guess I am asking if the end is near?
View 19 Replies
My 2002 Subaru Forester is making this weird clicking noise and unlocking as I drive. It seems to get worse at night, and especially when turning left, or braking. My mechanic can't figure it out.
View 10 Replies
My Forester was dead one morning and when I went to jump it off my pick-up in a hurry I did the age old palm to forehead and didn't pay close attention to the posts on my pick-up battery. Crossed the posts.So I began working through the common known issues.Replaced the main fuse. Didn't Start.Replaced the battery. Started... Car shut off while driving. Did not sputter out, simply cut out like turning the key off.Started right back up.Positive battery cable was loose. Replaced it.Grounds are good.Alternator output is good.So here are some more details on the car shutting off.
This last time as I was coming home from the store and the car shut off on the main road through town. I had enough momentum to get off to the side of the road. I tried to start it and it would turn over. Normal turn over sound but the car wouldn't start. I took a minute to check other electrical things in the car with key in the "on" position. Radio worked. Dome/interior lights worked. But then I noticed something strange. None of the dash lights came on (Car is not started but key is in "on" position). The windows did not work either.It started after about 5 minutes time and I made it home, forgot to roll the windows back up. Turned key to "on" again and couldn't roll the windows up. Got out of the car and came back after about 5 minutes, turned key to "on" and the dash lights came on the windows rolled up.
View 1 Replies
My subaru forester, 2002, with low mileage (40K) had routine maintenance 2 mos ago. Now sounds like it revs when in idle, and today began hesitating when I accelerate (a few seconds or so). I plan to take it in but wonder if there's insight before I go in cold (I know nothing about cars). Read on forums could be 02 sensor.
View 1 Replies
I have a 2002 Forester I have take it to 4 shops and each shop tells me something different. First 2 say to take it to the dealer and have them flash the computer. The dealer says that it is a faulty drain valve and the fourth states he has never heard of a drain valve. Hook up to a scanner and can not clear light. Unhooked battery for 30 minutes light was off for a minute but came back on. Getting extremely frustrated!
View 11 Replies
We have a 2006 Subaru Forester with approximately 118000 miles. My wife is the sole driver of this vehicle, we purchased it used a little over two years ago. When the engine is cold (only when it is cold) a loud "kick" sound comes from what sounds like the rear of the car when and only when switching from second to third gear. The dealership flushed and calibrated the transmission but the problem persists (albeit less).
View 5 Replies
I have a 09 Subaru Forester with 66k miles that vibrates like it is going over rumble strips when it up shifts from 3rd to 4th gear. It occurs under normal (not brisk) acceleration. I had the trans fluid changed at both the 30k and 60k services. I have owned this since new. It began before the 60k service. Also, sometimes the tach will increase revs during this as well. I don't know if this next thing is related but when I once need to merge quickly into interstate traffic I gave it a good amount of throttle and the tach revs increased but the trans did not follow with an immediate down shift.
View 4 Replies
My car is about 140K miles. It is a 2002 Subaru Forester. For about one month now, my car has this loud metal grinding sound from the rear of the car when I try to climb a pretty big hill. (The grinding sound is rhythmic, it is more like Click Click Click, but loud and metallic). After the climbing, the noise will slowly goes away. The noise never more than 10-15 seconds. The car functioned normally during all other driving but climbing this big hill. ( which I need go to through it at least 3 times a week). What could cause this?
View 2 Replies
