Steering - Pontiac - G6 :: 2006 - Rhythmic Metallic Grinding Noise Coming From Driver Side Front End
Jul 27, 2013
I've been hearing a rhythmic, metallic ringy grinding noise coming from the driver side front end of the car that seems to be in time with wheel rotation. It happens between 5 and 40mph, worsens while the steering wheel is turned even the slightest to the right, goes away completely during left turns, reduces and becomes intermittent above 45mph, and between 0 and 5mph, as I turn the wheel to the right from any position, I hear squeaking. I recently had the front control arm, ball joints and struts replaced. It has 140k miles. What could it be?
View 4 Replies
Advertisement
2008 2wd 4.6L 98K miles F150 for the past few weeks has been humming with a rhythmic vibration which feels like it is coming from driver's side front wheel. It doesn't do it constantly, nor at all speeds. Once I hit about 25mph, you can start to hear a humming. At 35, slight vibration. Between 50-60, heavier vibration. Sometimes at 65+, it subsides quite a bit. Both front rotor assemblies are newer, and I put in a brand new left because I thought it was a bad bearing.
View 5 Replies
A year ago I heard occasional metal grinding noise coming from the front, sounding like front driver side. Sounded like CV joints that I heard before. The mechanic said it's transfer case/transmission problem, so I replaced the transmission but the noise came back a few days later. The mechanic said to drive it for a while and the noise may go away, if getting worse he can fix it since it has 2-year warranty.
Now a year later the noise becomes predicable and easily reproducible, I went back and asked them to check. They said it may be passenger side axle. I am feeling being manipulated.
View 1 Replies
2011 F150 Limited 4wd 6.2 liter. I just bought the truck a few weeks ago with 26,000 miles. Late last week I began hearing a mild grind/rustling noise that appears to come from the driver's front. It's not terribly loud (loud enough to hear), but it's annoying. It happens when I slow down (on and off the brake and below 25-30 mph) as well as let off and begin to speed up. It doesn't last but a second after I let off the brake and speed up though. The kicker is it does not happen all of the time. I drove it home from work last night and it did not do it one time, but driving to work this morning it happened every time I did what I described above. I have taken it to our local tire/suspension shop and they claim they could not reproduce the sound which does not surprise me. They did a full inspection and found nothing.
View 14 Replies
When I slam on my brakes there is a grinding noise coming from the front driver side wheel and the smell of rubber. Also when I do a u-turn the same thing happens. I own a 1999 Honda accord v6....
View 1 Replies
I've got a 2006 f150 4x4 v8 ... I get a grinding noise (I think it is coming from the front left of the truck) that lasts only a little while and only comes out after a cold night (so I only get the noise in the morning after the truck has sat overnight)...
The issue details:
1. The grinding noise is constant and the truck has to be moving for it to make the noise
2. The truck will only make the noise while driving forward, it disappears when I drive in reverse
3. The truck has to sit overnight and it has to be cold (below freezing)
4. I only get the noise if I go in reverse BEFORE I drive forward after the truck sat all night
5. Will not make the noise while in 4x46. It has been doing this for about 2 months
What I tried:
1. Replaced both front wheel hubs
2. Replaced 4x4 vacuum and checked the lines for pressure
3. Front brake pads and checked calipers
4. While the truck was making the noise unplugged the 4x4 vacuum - still made the noise
View 4 Replies
I have a 2009 Toyota Corolla and it's making a loud grinding metallic noise on the front left side. It does it while I drive the faster I go the louder it gets. When I turn to the left it makes it louder, when I turn right the noise decreases. PG&E have been breaking the roads by where I live and there's a lot of little rocks I drive thru. I'm wondering if that's the problem?? What do I do?
View 4 Replies
I owned a 99 f250 a little while ago. Just bought a 2006 crewcab F150 xlt about 2 months ago, and for the past month there has been this unusual grinding or whirring like noise coming from the front passenger side wheel.
I took it to the mechanic and he found a bad wheel bearing on drivers side and replaced it but that wasn't the issue. He could hear the noise but wasn't able to figure out what the actual issue was.
The noise only happens when my foot is on the throttle. (not when coasting) and i also just discovered that it doesn't make any noise at all when put in 4x4.
View 4 Replies
I noticed that the driver side front wheel makes a metallic scraping noise while the car is turning right. It sounds like something scraping the rotor or shield behind the rotor ( a rotational/moving kind of scraping noise)
This only happens on a relatively sharp turn (wheel is turned 70~80% to the right). I don't suspect the power steering as there is no noise if the car is not moving even when wheel is turned to extremes. The scraping noise happens at any speed, as long as the car is moving. does not happen when car is turning left.
Note that I am 90% certain it is from the front... my ears may be playing a trick on me (kind of hard to listen precisely while driving). Where to start looking?
View 9 Replies
2008 F150 4x4 27000 mi There is an intermittent metallic /rattle sound (like marbles or a chain in a can) seems to be coming from front passenger side; sometimes on first acceleration , sometimes after turning a corner, sometimes after hitting a bump. Doesn't last more than a few seconds Had my mechanic friend look at it on hoist and no apparent loose parts in exhaust system or breaks; 1st noticed it last August ( 7000 miles ago) but it subsides and then reappears with no distinct pattern. best guess is a bad wheel bearing but it's never gotten any worse; other guess is transfer case/ chain problem but 4x4 use isn't much and it goes in and out of 4x4 mode with no problems.
View 2 Replies
What's that noise coming from the front end driver side. About 2 months ago Firestone replaced my 06 Vibe 5 speed manual base brakes, rotors, calipers, brake line & fluid replaced. The car is still making a noise when braking at low speeds. It generally happens after the cars been driven awhile or when warm. It sounds like metal on metal scraping. I can also feel vibration in the steering wheel when braking, is it possible that the hub bearing is going. I had the bearing replaced on the passengers side 2 years ago. Doesn't quite sound like the first bearing replacement. I took it back to shop and they replaced the brakes again when they replaced and flushed the lines. The problem is by the time they get to the car it's cooled down and they don't hear the sound. Should I have the hub wheel bearing replaced or is it something else.
View 3 Replies
I'm getting this clicking noise in the front drivers side of my car... it sounds like its related to the wheel because it's clicking in a rotation pattern, i.e. it slows down as I slow down, etc. The clicking noise dulls/goes away whenever I brake. Not sure if that means it's related to the brakes...or if it's something else.
View 2 Replies
I have owned a 2002 Volvo S60 2.4L for the past two years, and she has served me well. However, I have been having issues lately. She has hit 179,400-ish miles and with age things have started to fail. I want to know how much it will cost to fix these things and if I can do it myself.
There is a metallic popping noise coming from the right front side of the vehicle every time I make a turn (I haven't particularly noticed if it's a left- or right-hand turn when it happens.) I have been advised by my father that it's probably a CV (constant velocity) joint. Is that what's causing the noise?
My right front headlight has gone out, and I've replaced the bulb as well as the fuse, but it's still out. Could it be faulty wiring? The left front blinker has stopped blinking, I hope that's as simple as changing out the bulb.
The shift is automatic, but in the mornings (I've noticed it's mostly when it's cold outside) I attempt to move the shifter out of park and it won't budge for several minutes. Sometimes I have to turn the engine off, and then turn it back on for the shifter to move.
One last question- how often should I change and/or flush my transmission fluid and the filter, and can I do that myself or should I take it to the dealership? (Which I am reluctant to do.)
View 4 Replies
I just recently bought a 2000 Explorer, 4.0 OHV, 4x4 with about 150,000 miles.
I've had the vehicle for about a month, and ever since I bought it, it's had a grinding sound (sounded like wheel bearing) coming from the front right side. I replaced both right and left bearing/hub assemblies, and took it out for a drive. The initial sound that I thought was bearing noise is still there, and at about 65mph I started to get a little bit of steering wheel shake. I took my foot off the gas and it stopped. I accelerated up to about 70mph and it seemed ok.
I hit a VERY small bump in the road and the steering wheel started shaking like hell. So bad that I almost lost control. I slammed the brakes and the shake stopped instantly. I took it home and put it up in the air, half expecting to see something loose or broken, and everything looks perfect. I re-torqued everything that I had taken apart for the initial hub/bearing replacement, and took it out again. Same issues.
I never had ANY of these problems before I replaced the hub/bearing assemblies, so I'm completely confused. I was thinking CV joints, but I have no clicking at all when turning, in forward or reverse, everything is smooth. Outer tie rods were done about 6 weeks ago..
View 1 Replies
I'm having horrible squeaking/creaking noises coming from the front drivers side area of my car. I can hear it inside the car with windows up or down. Not sure if you can hear it from the outside or not. It is only when going over bumps or uneven road surfaces at low speeds. If I'm even going like 40mph and there is uneven surface I don't hear anything. It's 85 degrees today, and I notice it has gotten worse with the hotter temps. I just purchased the car a few months ago when it was still winter, and only recall it gradually doing this as the weather has warmed up.
The weirdest thing is that my previous sunfire (also a 2002), made the same exact noise, but never did get it checked out because the head gasket blew and I got rid of it. I tried pushing on the front end while it's parked to see if it makes the noise, but I didn't hear the slightest chirp, unless I'm just not strong enough to give a good enough push. What could be wrong? I don't wanna throw a whole lot of money into it not being sure what it is, and I have read a lot of horror stories of mechanics trying to pinpoint noises and still not being able to find the culprit thousands of dollars later. 2002 Sunfire GT....
View 8 Replies
Alright so I'm having a problem with my 2003 Ford Explorer. I've recently noticed that when I get to above 40 mph, if my steering wheel is straight, I hear a loud kind of grinding or humming sound coming from my left driver side front. If I am going about 65 mph, it gets even louder and if I crank the steering wheel to the left, that's when it really gets noisy but as soon as I crank it to the right, the problems gone. When I do hear the hummin sound, I can feel it in the steering wheel. I have replaced al of the tires and it didn't work. Also, the car slightly pulls me to the right.
View 10 Replies
At this point I'm baffled. I've been hearing a grinding/rattling noise from the driver side wheel well for a couple months now. I was positive it was being caused by a bad hub, but the problem persists. Here is what I've done so far:
replaced brake pads and rotors -- twice; once before the hub went bad and once after. The bad hub warped the driver side rotor and afterwards passenger side would not stop squealing for some reason. replaced faulty wheel hub -- The bearing was totally shot, nearly 20* of play in it, should be totally rigid replaced faulty CV axle -- I suspect vibration from the bad hub destroyed the outboard CV joint, making popping/grinding noise while turning or going over bumps filled front differential -- it was a bit low on gear oil The grinding/rattling noise shows up when driving at freeway speed (around 55mph) and gets more pronounced as speed increases. The truck does not do this under acceleration but after speeding up, the rattling is the worst at light throttle (around 2k-2.5k RPM, in 4th gear/overdrive above 55mph).
I noticed that if I shift into neutral at freeway speed, the noise continues until the truck decelerates.
So at this point my thoughts are that it could be a bad differential, but I doubt it because the noise is almost imperceptible in the passenger seat. It could be a bad differential bearing on the drivers side (sounds like a worn out bearing to me). It could be any number of things in the transfer case or transmission.
View 5 Replies
Noise sounds like its coming from driver's side. It's not terrible until you hit 30-40km/h, after that its quite loud. No whistling sounds, which i was told to listen for if it were a wheel bearing (although I ma not convinced is the only sound a warn bearing makes).
The sound sometimes goes away when I am on a bend turning left (taking the weight off the drivers side wheel).
View 6 Replies
I noticed while driving my car there was a unusual rumble or grinding sound coming from my drivers side front wheel well. I get out and look I see a bunch of Fluid all over my wheel well. I look around turn my wheel around and see this fluids all on my rotors and suspension. Ive noticed couple weeks back the boots on the struts were ripped in two pieces from deteriorating or dry rotting (this was on both sides) and ive also been hearing some odd squeaking sound for over 15k miles every once in a while going over big bumps or train tracks. Struts go out at only 80k miles on their corolla? Yeah struts do usually lose their life around 60-80k miles but I've never seen them leak around that many miles. Is this a common issue?
View 5 Replies
I have a 1996 Honda Accord (automatic) with just over 149,000 miles. In the 5 years since I've owned it it's required little more than some new spark plugs and tune up. I currently drive about 30 miles a week, but starting tomorrow I'll be driving much, much more to a new job. Living in Chicago with awful potholes, salt, and traffic, I'm concerned about what may happen in the near future...
I've been getting a grinding noise on the front driver side for years and have never fixed it and never noticed a change...I know it's the tie rod ends/ball joints. I've been warned that the wheel could come off, and as much as I believe them and don't want this to happen, nothing has ever happened. Is this something to do since there has been no change in symptoms or car performance in a couple years?
Other than that, any tips for keeping the car in good, working order? I do oil changes, but are they really necessary every 3000 miles? I have to make it last as long as possible and actually love the car anyway!
View 9 Replies
First off I have a 2009 F150 4wd 4.6L truck...we have noticed a grinding noise on the front driver side wheel...we have replaced the auto locking hub acuator and the hub assembly but the noise is still there....it has us puzzled now not sure what it could be. I have read many different threads on this issue an it seems that it might be something to do with the vacuum. The noise is only on the driver side and only in 2wd, when its in 4wd it doesn't make the noise at all. Also while in 2wd the noise seems to go away when we let off the gas.
View 5 Replies
