I just started getting this thumping sound, at very slow speeds from the bottom front end. What this could be. It sounds like it might be coming from the suspension or steering.
View 2 RepliesMy 08 passat seems to shutter or vibrate at higher and lower speeds. It comes from the wheels(front). At first I thought my wheels aren't balanced, but the VW dealership said everything is fine.???huh.. they roadtested it and nothing...but others that drive with me totally notice it..Major road noise because of it.
They also sold me winter tires and rims and they wore out after 25k same noise?... "Broken beads".... they said i hit a pot hole.. I don't think so.... So what do you think? Rotors? if so how much am i gonna get jacked ..
2013 SF Limited AWD = long base, 41K miles
Slow speed sharp turns left and right taking off from a stop I hear a thumping/light popping in the driveline. Seems like it could be a differential issue?
I also hear an unusual noise while accelerating in a straight line.....under throttle from a stop, it sounds like a rapid chirp on and off, every other second. Almost like a valve tick. The noise is heard under acceleration in gear, not when cruising at light throttle. I put the transmission in neutral while rolling, revved up the engine and the noise is not heard. Only happens when in gear and accelerating.
Today, I took my 2007 Saab 9-3 2.0T with 67,000 miles on it to a local mechanic to check the right front suspension that has been making a clunking sound when hitting potholes, etc. I was told that the right front coil spring is broken. This afternoon, I looked on line on some of the Saab discussion boards and saw that for cars up 2006 that there was an extended warranty offered for 10 years and 120,000 miles due to multiple cars with this problem caused by an, allegedly, faulty design that allowed the springs to corrode and fail prematurely in snow belt states that salt the roads.
View 3 RepliesIn the last few days I have been hearing like a thumping sound coming from the front of my car. It is happening when i going through a turn with some bumps, slightly aggressive, but not crazy. Haven't been in the canyon since it started so I am not sure how it will react pushing the car to about 7/10. Which is about as close to the limit as I will get off track. The sound has come at about say 4/10. just off ramps and stuff. It sounds very similar to a car with very tight coilovers. Could it be the XDS working? It isn't a clicking like a traditional diff, and I don't expect that it is. But obviously I don't have a lot of driving experience with an electronic diff like the XDS. I will take the car to VW as soon as i have time.
View 2 RepliesI just bought an '02 Passat with 42k miles on it. I didn't notice it when I test drove it but now I'm hearing a knocking/thumping sound from the front end that goes to the speed of the wheels at slow speeds (10-30mph). I can also feel it pulse when I use the brakes at slow speeds. What this might be?
View 3 RepliesMy friend has a 2005 Subaru Impreza RS (2.5 L) that just (today) started making what amounts to a clicking or thumping sound once the car reaches about 30 mph. I'm sure it does it at slower speeds, but I was unable to hear it. It is definitely in the front end. And seems to be coming from the drivers side. I asked if she had hit any large potholes recently, and the answer was no. Around three weeks ago she had studded snow tired mounted on the car. I don't think the tires are the issue. But perhaps the installation process may have played a part since the care was placed on a lift.
View 8 RepliesIt's come to my attention that I have a thumping sound coming from my lower front end. It only happens on low rpm's and I can hear it best when it's in neutral, if I give the brakes a little push I can hear it louder, more profound, and can also feel it on my feet a little, but I don't only hear it while I have the pedal depressed. So..what it could be?
View 1 RepliesWhen being driven my '66 Stang makes a clunking sound in the front end which seems to be coming from the front toward the passenger side.
I've had the car in to my mechanic twice in the last 30 days for this issue. He took the wheels off, repacked the brakes on one side, but hasn't found the problem. During the test drives the car did not reproduce the noise.
Lately, I've noticed that when I really hear the clunking noise is after I've made a sharp turn, like when driving slowly in a parking lot, and have returned the steering to a straight position. We didn't make any sharp turns during the test drives.
Metal on metal rubbing sound when starting off from a stop at slow speeds? It seems like it is brake related because putting on the brakes stops the noise. The noise also seems to go away when you get a little more speed, and maybe when the it shifts from 1st to 2nd ? This also is intermittent.
View 2 RepliesI have a 2005 Camry XLE. Since past few months I have started hearing a strange grinding / thumping noise from the front passenger side wheel. It can be clearly heard at slow speed and almost sounds like the wheel is lopsided and is rubbing against something. As the car picks up speed, the frequency picks up and the sounds disappears eventually.
So, I figured it must have been because the car had hit a curb few months ago and must have bent the rim. I had the wheels looked at while getting rotation and balancing done and was told that there is no rim damage. The sound went down a little after rotating the wheels but is still there. The mechanic doesn't think that it is the bearing because the sound disappears after moderate speeds. So, trying to figure out what could be causing the noise?
I just picked up my car after having a shop install ball joints, tie rod ends, and end links and there is a thumping sound coming from I'm guessing the right front tire that is consistent with speed. I had an alignment done today as well. Is it possible that my newish tires are already worn unevenly and the alignment is showing that now?
Either that or the wheel is not seated completely. I'll call the guy back tomorrow when they open and let him know what I hear.
Only reason I didn't so it myself is because its cold out now and he did everything including alignment.
Looking for a diagram that breaks down the front axle components of a 1997 mercury mountaineer? I believe my drivers side ball joint is shot because it makes a thumping sound whenever it goes down the road and the wheel has a lot of play in it.
View 2 RepliesJust had a hub get stripped a few weeks back and had to replace the whole hub assembly. Now just a few weeks later, I started developing this strange rubbing, almost scraping sound when backing of the garage in reverse and the diving speeds of like 5-10 mph. It has to be wheel related becuase the sound goes in and out as the wheel goes around.
Put the car up on jack stands , checked fender plastic underneath the wheel wells, dchecked the dust sheild on the rotors, checked the tires out, even spun the rotor around with my hand and I couldn't replicate the sound?
Just Started about 5 days ago and was only noticeable at slow speeds every other day, then today it seemed worse and I can almost hear it when driving 25-35 mph and I'm also starting to feel it in the steering and body of the car as a vibration.
I just want to get this car back running smooth... Just put new suspension on as well, new strut bearings, but I had to reuse the strut mounts because the dealership was out of mounts. Don't think the suspension has anything to do with it, but you never know. How to upload a video... I can see if I can somehow record the sound.
I have a 2003 Explorer 4.0l 4x4 auto. Yesterday day the passenger rear tire got a flat, so I put the full size spare on, and went about my business. About 2 miles up the road is a stop sign, so I start slowing down, and while slowing down I can hear a whining thumping sound from the front of the vehicle. It wasn't doing this before the flat, but right after I put the spare on it starts to do this. It only happens when slowing down, not under acceleration.
View 6 RepliesI have a 00 expedition 4wheel drive eddie bauer. 100k miles. New tires, recent alignment, new upper ball joints and tie rod ends, recent suspension change over to passive system with new shocks. Also must note I have "newer" front wheel bearings but they were from advance auto and not the suggested Moog ones.
I have a loud clicking noise at slow speeds. def sounds like its coming from the front area. Speeds up and slows down with acceleration. brakes do not change noise other than slow it down with tires. The truck also vibrates on the highway. I notice the tires are wearing (cupping)
Is it the cheap wheel bearings? what is the best way to test for bad wheel bearings? i think they are under warranty if I can find the receipt. Anything else i should test? can it be c/v joints or something?
I have a 03 mkIV 2.0 with just over 106k miles. I have been noticing a sqeak/creaking noise coming from the front end usually at slow speeds and going over small bumps or even bad backroads. I can simply push down on the front of the car and hear it and it sounds just terrible. I took it to my local tire shop and they said it could be my sway bay links and bushings, but they look brand new and show no signs of deterioration. My struts and shocks are fine. Could it be ball joints or control arms?
View 6 RepliesI am considering purchasing a 2004 Chrysler Pacifica. It seems to be in excellent shape except for one thing--it makes a very noticeable creaking noise. The noise is coming from the front end and seems to only appear at very slow speeds (like in parking lots). The seller told me up front about the noise, and explained that it didn't start until he had someone "jerk" him out of a snowdrift in Colorado. He says that was about 4 years ago. He tells me he has had the front end aligned, he has had two motor mounts replaced and has had either the tie rods, or the tie rod ends (I'm not sure which) replaced, but the noise is still there. He claims mechanics can't find anything else wrong with it, and they assure him it is safe to drive.
View 4 RepliesI have a 2000 Suburban with about 170,000 miles on it. I'm getting an audible clicking sound at slow speeds which increases as the vehicle speeds up and also a fairly severe vibration which becomes noticeable at about 20 mph and becomes worse as the speed increases. I thought maybe driveshaft but things seem fairly tight. Also, this has gotten gradually worse over time.
Ok I figured out where the vibration was coming from...U joints in the front driveshaft are shot. Now I have another problem...I've removed the fwd u joint straps and according to the book, the driveshaft should simply slide to the rear into the transfer case so I can lower the fwd u joint but the problem is that the part of the shaft (which slides into and out of the transfer case) seems to be frozen/stuck. Do I simply beat on it with a hammer to break it loose or am I doing something wrong?
Ever since my last oil change, I've been having this low whirring or moaning sound at slow speeds (below 30mph). Switching the dial from 2WD to AWD, the moaning noise increases as if it engaging AWD; then it decreases. When switching back to 2WD, the sound doesn't go away. Other times, I don't hear this moaning sound and I hear/feel a very slight clunk.
It's like my truck is always in AWD and won't disengage. When I took the truck to the dealer, the service manager was with me and heard this noise, but when the 4x4 tech drove it, of course it acted perfect. Apparently, they had engaged/disengaged the AWD/2WD so many times that the 2WD/4WD appeared to work. The guy said, oh what you're hearing is normal, lets get back to the shop. My mileage is also dropping - another indicator being in AWD.
The dash panel always shows the electronic shift as successful. I know it engages while I'm driving because I sometimes hear/feel a slight clunk and then the roaring as if I'm in 4WD.
My 79 year old father put fuel additive in his 2010 Chevy Impala. Don't ask me how much, or for how long... The Check Engine light came on. I never got a clear answer from him on what his mechanic said about it. Five to Ten fill ups later the Check Engine light went out on its own. Engine seems fine. Could this have caused damage to the engine or emissions controls? Would a computer diagnostic from a mechanic pinpoint any problems? Would you recommend a computer diagnostic be performed?
View 6 Replies