I was driving to church this morning when my brake light inside my car starts beeping. As soon as I put it in park and back into reverse it quit beeping. I am just wondering if this needs to be looked at asap. My brakes work fine. I can stop suddenly and everything. My dad changed my front brakes earlier this year and is going to do my back ones soon.
View 4 RepliesI recently snapped the emergency brake line on my Bonneville by using it for the first time. Now my brake light is on and beeping. It isn't siezed up. I don't plan on fixing the line if I don't have to. Is there any way to stop the beeping.
View 2 RepliesMy wife's '97 Bonneville has recently begun acting up. It especially seems to not like the cold weather. It starts hard then the motor will fluctuate and hesitate and die. It usually stays running the second time. Then when I put it into gear pushing the throttle doesn't do anything. It seems to stumble and falter. Sometimes, if I pump the gas it works other times if I move the pedal up and down slowly I can find the "sweet spot" and it will accelerate. I'm not sure if it's related or not, but sometimes going down the highway on long trips it will seem like the transmission is slipping and the car lurches or slows down. It's really weird. Then if you shut it off, it won't turn back on for 15 minutes or so.
View 11 RepliesI have a 2000 Pontiac Bonneville ssei (Supercharged) 3.8L V-6. I had a issue with the fuel injectors now that problem is fixed. I can't get the car to start on it's own. I and a auto garage have replaced the MAF,MAP,Camshaft Pos Sensor, Crankshaft POS Sensor, FPR, ICM, IAC, Someone had the TPS in wrong and I was missing 5 volts at pin B of the TPS. I corrected that and now it's ok. The engine cranks but it will not start on it's own, I have about 54 psi on the fuel rail.
The ECM was replaced by the dealer before i fixed the fuel injector problem but that did not work so the original is back in place. The car runs like a top after I shoot some starting spray down the intake and will run until I shut it off. I try to restart it and it won't start until I spray it again. I am very careful not to spray on the MAF sensor. Even with that being said I use Electronic spray cleaner to start it. All Sensor wires have been checked with the exception of the crankshaft position sensor which I'm going to do today going to the icm.
i have a 1966 pontiac catalina and i am replacing most of the brake components including the drums, which a car of this vintage has at the front also. the new drums don't include hubs, so i will have to swap the old hubs to the new drums. do i have to go to the machine shop to have them press these apart?
View 16 RepliesI replaced the front brake pads and rotors on a 99 Bonneville about a year ago. The outside pad on the passenger side has worn completely out and has ruined the rotor. The inside pad on the same side looks fresh. Everything on the driver's side looks good. What the heck happened? I am not an expert but I have replaced many of these GM brakes and have never seen this result.
View 11 RepliesMy friend has a 1996 or 1997 Pontiac Bonneville with over 130K miles on it and its been in her family for several years and she says the "Check Engine" light on it has never turned off. She's taken it to different shops to have it looked at and none of them can tell her what's wrong with it. As far as she can tell, the car runs fine, she keeps up with the service on it but I wonder what would be causing this? I once owned a 1999 Chevy Malibu with the V-6 3.1 liter engine and I had the same thing happen to me but when I had it serviced, the mechanic hooked a little code reading device to it and turns out the spark plugs were misfiring so he changed the coil pack in it....problem solved. So obviously my friend is having issues with fuel emissions system in it but I wonder why the mechanics in the City she lives in can't seem to figure out the problem. Not saying her car has the same problem my old malibu once had, there's a number of reasons why that light turns on and from what I've learned it usually involves the fuel emissions system in it. So what could be wrong with it?
View 4 RepliesEvery year at this time I get check engine code about either the temp. sensor or the thermostat. I replace the temp. sensor every year, and last year I replaced both the temp. sensor and the thermostat and flushed the cooling system and replaced the coolant. but not this year, no I'm not doing it! For there has to be some other reason other than the temp sensor failing each year! 2005 Pontiac Bonneville 3.8 V6....
View 6 RepliesI have a 1995 Bonneville with about 160k miles. I have a problem with the PARKING light on the dash coming on, accompanied by a chime. This happens fairly consistently after first starting the car and driving off, or after coming to a full stop (e.g., stop sign) and then pulling away again. The light and chime come on for only 5 or 10 seconds before stopping all on it's own. One suggestion was that the parking brake pedal was sagging, but pulling up on the pedal does nothing (it's up all the way and doesn't budge). I've also read that a leaking master cylinder may cause the light and alarm to activate, but I can't see any evidence of leaks when I examine the MC.
View 3 RepliesWell today I was happy go lucky on my way to work everything was going fine then all of a sudden this car in front of me slows down. Okay then I go to speed back up and my car was still crunk but I lose power I could not accelerate at all. So I had to coast to the side of the road and I put the car in park to see if it will allow me to accelerate in a different gear and when I do that.
The car shuts off then I go to crank it back up the first time and I got nothing then I wait a couple of seconds then try it again. It cranks up but still cant accelerate until I raise the engine then I can finally move. I was able to do about 65 mph to get to work but this happened two more times before I got back home that night. The car is a 2000 and has 220,000 miles on it.
I took the car to a part store to see why the service engine light was on. They told me it was a bad or faulty EGR valve but this was the first time the service engine light has flashed before.
My wife's 1998 Passat's ABS and Brake lights both comes on along with that beeping buzzer. Everything is norm from start up, but after driving about 10 miles or so the ABS/brake light& buzzer show starts up.
It seems the ABS is working because my wife found a patch of sand in a parking lot and jammed on the brakes while the ABS/brake light& buzzer show was going on. She said she could feel the brakes pumping.
We took it in to the dealer and they check the brake pads and sensors. They said that the sensors and pads were ok. They thought it might have been dirty sensor, so they clean them.
Two days later the ABS/brake light& buzzer show came back. But this time my brakes squeal a little if you press on the brake lightly. (cleaning solution got on the brakes?) Also how big a deal is it installing a new ABS black box ? (where is it?)
1995 Pontiac Bonneville cranks but wont start.
I've replaced the crank sensor and also the cam sensor with no luck, the car cranks with no start, when I used starter fluid the car runs, when i stop using fluid it shuts off what could it be.
Only has 38,000 Miles on it.
Well I have to make a long story short, suffice it to say this is a bit embarrassing, but I need an answer: I removed the 440-t4 transmission from my daughter's 1987 Pontiac Bonneville and had it rebuilt. After I replaced the unit I discovered I left off (and lost) the TV link and cable. I (miraculously)found the link and the cable, and I am wondering if I can replace the link without having to remove the side cover of the transmission, and what I can do to avoid dropping the TV link rod down into the trans while I am trying to reattach it to the linkage arm inside the trans thru the little TV link hole on the top of the trans.
View 5 RepliesI have a beautiful 2002 Pontiac Bonneville SSEI with just over 100k miles on it. I've been saving for a new set of tires and a new regulator for the rear window. The window suffers from the "pop and drop" syndrome but I have instructions on how to fix it myself when I can get the parts.
Yesterday, I started her up to go to my second job when I discovered I had no reverse. In drive, I could just creep forward at 3000 rpm. Fixing a transmission is probably the worst case scenario I could imagine happening.
I'm left with two options: Either find something simple I can do myself to get it moving again or get what I can for it and use the proceeds to buy a piece of metal to get back and forth to work.
Air ventilation on my 92 pontiac bonneville ssei. There is no air coming out of the dashboard or the floor. only to the windshield. What can be the problem?
View 3 RepliesMy Pontiac also has oil on the engine now with the oil pressure at 120. It started at 40 then went to 60. I had the oil changed and they put 5w30 which they were not supposed to do. I wanted 10w30.
Is this a common problem with Pontiacs? Is there a non engine replacing solution? Will I have to tow it to the mechanic?
Yesterday this thing died on me twice. 30mph to 0 in nothing flat. No problems with stalling before yesterday. It's at the shop now, but they tell me they aren't finding anything and probably won't if they can't get it to die on them too. It had only been driven for about 5 minutes before each occurrence, and each time I had just topped a small hill(if that matters). The second time, it did slightly hesitate to restart and seems to me there was some light smoke from the tailend.
View 19 RepliesMy brake fluid is fine and fuses 5 & 9 are good. Brake lever is all the way down as well. Have read that for some simply replacing the cap worked. Car is a 2000 w/170K. BTW, A/C does not work, clutch not spinning, fuses ok there as well. I've made sure a/c button is not on nor is recirc button. Some have said probe can be related to this but that also can show up with a bad fuse # 5, but mine is good.
View 5 RepliesSo my girlfriends passat is starting to have some problems. It looks like a light show on the dash. When driving it, every now and then (a lot more now) the tach goes dead, and the oil and brake light flash, and it starts beeping. The car also has a ABS light on but that has been on for a long time.
So far I've checked both the oil and brake fluid levels, and checked all the fuses. Everything is good there. It just seems funny that they all go at once. I figure maybe one of the plugs to the cluster is loose giving everything a zero reading? I need to buy a vag cable and software some time that's for sure.
I have a 1996 Pontiac Bonneville, when i bought it it came with a remote that was broken, so i have an old remote from a 2000 Chevy Venture that i want to program to work with my Bonneville, my owners manual has no information on reprogramming and I don't want to pay a dealer or mechanic money to do it, looking for the process of re-programming this for my car?
View 3 RepliesOn Sept 10, 2011 I was driving towards a major highway when my airbag light came on. I just figured it was a sensor malfunction and kept driving. I proceeded to the highway and when I was up to 57MPH I put my cruise control on. About 3 minutes later both of my airbags deployed while I was driving. Do you think I need a lawyer?
View 19 Replies