Nissan - Murano :: 2005 - Noise Coming From Front - Wheel Bearing?
Jan 2, 2012
I just had front and back brakes replaced and there is noise coming from front (I think it's the front)? Any way my brother says its the wheel bearings and that my mechanic should have "caught" that they were bad. I've gone to mechanic for almost 10 years and trust him. Never had wheel bearing problems before so not sure what to think. And if it is wheel bearing can u ballpark cost to fix in Illinois ?
View 10 Replies
Advertisement
I have a 2013 Elantra, new in January, 6600 miles on it, and I took it in to the dealership today because it was making funny noises this week from the left front wheel; the noise gets faster as I drive faster. The left front tire has a bubble in it, and they're telling me the wheel is bent and the bearing is cracked, so they'll need to replace the tire, wheel, hub, bearing and do something with the alignment AND it's not covered under warranty because it is "impact damage." Is this even possible on a new car like this? For the bearing to be cracked without a big accident? I don't remember hitting a pot hole or running over a curb. Shouldn't this be covered under normal use? I'm concerned that I'm being ripped off
View 16 Replies
I've been having a lot of noise coming from the front left tire, and I finally had it diagnosed as a bad wheel bearing today.
I noticed that the front wheel bearings are sold individually while the rear wheel bearings are sold as hub assemblies. Is there a certain way that the front wheel bearings have to be removed and pressed on? I'm trying to see if this is a DIY repair.
View 14 Replies
I have a 2009 Nissan Murano. I have owned the car for two years now and have been plagued by this issue since I have aquired the car. When I am driving along, anytime I encounter an uneven part of the road at 40-50mph I feel a clunking/knocking in the steering wheel and the gas pedal. This knocking is felt even if the road is smooth. Anytime the front end is responding to the road ( I.E. sunken catch basin) I feel this knock/clunking. This issue gets much worse in cold weather and is much better when it warms up. Since finding this issue, I have had the tires rotated, balanced, I have had a 4 wheel alignment done as well. I have also had the shocks and bushings checked from the dealer. I drive almost 100 miles a day for work and this has me at my wits end with this car.
View 1 Replies
Ok to begin I took my Nissan Murano in because I was barely able to reach 20 MPH. No power whatsoever. Devouring oil. Was suppose to take 3-4 days he said. Ended up taking over 1 1/2. Which I didn't mind as long as the car was fixed!Okay I got it back the very first thing I noticed was steering was SO hard to turn. He said it should loosen up in a couple days. It didn't. Took it back let him have it for hours. Didn't get fixed.He said it may need a new power steering pump (funny, didn't need one BEFORE)
2nd thing I noticed.. The steering was off to the left. He said that it he could fix that. When I got it back at first it was on straight then it just started turning about one day to the left then upside down then back to the top.Ok no problem. Took it back he said it was something to do with the steering column not being pushed in well so he bolted it or something. Ok got it back and the steering is still off to the left a bit and now it pulls to the left.Tell him and so he re does the "bolting" fix.
Steering still really hard to turn so he tells me I have to pay for a new rack and pinion!!!! That is ISN'T the steering pump.And on top of that NOW my horn, airbag light is flashing, sound control panel on the steering wheel and cruise control ALL isn't working. So he said I HAVE to pay for something to get it fixed.
View 19 Replies
So on my girlfriends 2000 echo I get the classic bad wheel bearing noise/vibration on the front left (driver side) wheel. Worsens under load (right turn) and goes away when unloaded (left turn). I've replaced left side bearing, CV axle, brake rotors/pads and the noise still persists. My next thought is maybe the ball joint but humming/vibration tells me something out of rotational balance. Bearing in the transmission? I don't know. I'm stuck.
View 5 Replies
Occasionally and randomly, my front two windows will lower themselves. Most of the time... all the way. But sometimes only half way. Both windows lower at the same time to the same degree. This happens only when parked and unattended, not when the engine is running or someone is in the car. It has happened in parking lots (outside) and also in my own locked garage with no one around. Sometimes the car is locked and sometimes (in my garage) it is unlocked. My Nissan dealer has no idea what is causing this nor how to correct it.
View 4 Replies
So after doing wheel bearings in the car. both front and back. I'm still getting the "wheel-bearing hum" sound if you will. Don't know how this can be possible with all brand new wheel bearings and hub in the front passenger side. other hubs were fine. I do need tires which will be ordered soon/ alignment im sure.
View 5 Replies
I have started hearing faint thumping noise in my Murano, coming from the front most likely.It sounds as if I have a bold spot on a tire and is very faint. I can also feel it faintly through the steering wheel.It's not a ticking or hard knocking noise. Also, the noise is variable depending on the speed AND the duration of noise is also speed dependent (going slow, the thump is drawn out. Going faster, the thump duration is shorter.)Here's what I have done so far but the noise is still there.
-Rotated both front tires to rear
-Inspected the tires while rotating and saw nothing out of ordinary
-Checked the pressure and everything's good.
-All lug nuts torqued to spec
-Visual inspection of brake rotors and calipers seems fine
The car has 34k miles on it and the tires are in good condition although there's about 1/8 - 3/16" usable tread left. What could this be?
View 8 Replies
When i step on the gas there's a rattling noise in the engine like it's starving for gas but when i put super unleaded in it goes away.
View 6 Replies
So my front right Wheel bearing is making noise and its a used Knuckle so its w/e. Guess ill use tonight to do all my bushings and fluids n stuff.
View 6 Replies
Having issues with noise from either LT or RT front wheel bearings? My 2011 Elantra has some sort of noise coming from the LT frt wheel
View 10 Replies
I devloped a noise in the right front wheel. I thought it was a tire going bad so I rotated the tires & still had the noise. I was told by shop it is a wheel bearing. If that is the problem is that a DIY repair ?
View 5 Replies
I have a 03 explorer with approx 160k, I am experiencing a thumping noise while driving. It gets worse on right turns and gets better on left turns. initially i thought LF wheel bearing so i ordered a hub assy and replaced LF. noise is still there. I guess, thumping noise caused by wheel bearings, i know its usually a grinding kind of whirring noise.
The noise doesn't seem to change with accel/decel so I don't think it is driveline related (diff, drive shaft etc.) should i bite the bullet and replace the rf as well??? I should also mention that there is also a shake in the steering wheel that seems to coincide with the thumping (i.e., my hand shakes along with the thumping, and the shake gets worse when the noise does)...
View 8 Replies
I have a 2004 Nissan Murano. Recently I noticed that the motor is noisy while running and idling both - no difference. I can't really hear it outside of the car, but I sure can inside. It's even worse when it's cold. Is this something to be concerned about?We took it to a local mechanic who could hear the noise, but what was causing it.
The last time we had several trips to mechanics with no answers, we wound up replacing a transfer case that went kaplooey. We had at least three mechanics on that one. No one knew why it smelled like burned oil, or leaked a little. Until it went out completely.
View 1 Replies
I have the dreaded front wheel bearing noise front left had a monsoon last month in orlando. Went through a puddle. Did the front right 8 months ago,everythings fine I am doing uber. Can I spray some deep creep or oil in there to tempt calm the noise?
View 1 Replies
I'm working on a 02 explorer. The front end is howling so I replaced the left side and no change. The howl goes away when braking. Is it the right side then or something else? I replaced both front brakes pads so it's not that.
View 2 Replies
My girlfriend owns a '92 Plymouth Acclaim. We noticed a few weeks ago that there was a clunk/rattle noise coming from one wheel, and since it mostly happened while cornering, thought it might be CV joints or maybe suspension. She brought it to her mechanic who inspected the brakes and found that the rear shocks were bad, but sent her away without fixing anything. The other day, on a long drive, the rattle suddenly intensified, morphed into a loud grinding noise, and then the wheel fell off.
I think I'm going to have to confront the mechanic. The bearings apparently hadn't been repacked in some time, and were surely the cause of the rattle noise. I'm less concerned with the fact that he might have overlooked an obvious problem as much as neglected to properly service the vehicle.
Are brake techs supposed to check, then tighten wheel bearings or repack them if needed?
View 18 Replies
I just bought a used hyundai santa fe sport 2.0t. i noticed it is fairly loud inside compared to my 2011 sonata. I don't know if im hearing tire noise or maybe a wheel bearing type noise. It's coming from the rear and gets louder as I go faster. I'll admit O am paranoid and probably making this sound worse than it is.
View 12 Replies
I have a 94 Explorer. I recently swapped over from auto to manual hubs. I followed a detailed write-up that I found online. During the process I repacked my outer wheel bearings. Ever since then I hear a grinding noise coming from the front wheels. Sounds like the bearings aren't seated properly. The guide that I followed instructed to torque the spindle nut that sits next the the outer wheel bearing really tight in order to seat the bearing, then loosen it back up and hand tighten it. But when I loosened the spindle nut the wheel bearing would pop back out. What is the best way to get a wheel bearing to stay seated properly?
View 2 Replies
We are working on a 97 f250 light duty 4.6 4x4 5spd. Trying to figure out where a bearing noise is coming from in front end. Replaced both front hub bearings from napa. 150 each... the noise is still there. someone said could be cv shafts... although ive never heard a cv shaft make this noise i replaced them anyway cuz one was clickin last time was in the woods. bearing noise is still there..... in a long bank turn to the left the noise goes away till start to straighten out. while replacing the half shafts I grabbed the plates the shafts bolt to and spun them and checked for slack. none found. front diff's full with no leaks. as title says.... what next?
View 6 Replies
