Nissan :: Keyless Entry Vehicle With Remote Starter - Engine Shuts Off When Brake Pedal Depressed
Nov 15, 2012
Nissan Rogue SV 2011 is keyless entry vehicle. When using remote starter, the engine shuts off when brake pedal depressed and the car is restarted to drive away. does this 'turning off/turning on' the engine damage any of the systems of this vehicle. it just doesn't seem a good idea to have the engine turned off and then immediately turned on.
View 5 Replies
Advertisement
I'm putting in a remote starter keyless entry in my 2000 f150 I have all the wires figured out except for the remote start part. Where the wires listed in the photo go? I do have the module required.....
View 3 Replies
Let me start by saying the car is the 2002 ford focus and has a remote starter keyless entry and alarm that has been in stalled years ago so the one day I'm trying to go inside my car and the unlock button on the key fob doesn't work so I put the key in the door and open it all the doors unlock.
I ignored it when I'm leaving the car I lock it with the key fob it chrips then my son rushes outside and opens the door. That's when I noticed the door didn't lock then I try the door switch to lock and unlock the doors but nothing happens I tried the passenger switch nothing
Symptoms : Both driver and passenger door lock switches are not working If I hit the unlock button twice on the key fob all the doors unlock...
View 2 Replies
I recently had a remote starter (AutoMate) installed in my 2008 LS460. The remote starter works great but when I open the car door the engine shuts off. I then need to restart by pressing the START button on the dashboard. Is this a safety issue or is this something that can be avoided?
View 8 Replies
How do i program my keyless entry remote to my 99 grand am?!?
View 3 Replies
I have a 2005 Prius. The remote keyless entry just stopped working for locking and unlocking the doors. I replaced the battery and it didn't affect it's performance. The key will still start the car without inserting it into the dashboard. It feels like the unlock portion of the remote is "stiff" and does not depress. It is toyota model number B31EG.
View 2 Replies
I noticed today that the red (panic) button cover is lost from my keyless entry (silver Toyota logo) Gen II 2008 remote.
What I basically need is a broken remote, essentially just that red rubber cover.
View 7 Replies
I have a 2005 Pruis and the remote entry does not work. Changed the battery in the remote and I still have to put the remote key in slot to start the car. Been working fine for ten years.
View 5 Replies
I have a 2003 Camry I4. My RKE stopped working. First I checked the battery in the remote, it reads 3v like it should. I searched and found how to reprogram the the receiver, so I tried that. I did the door and key dance and got to where when you pull the key out and the door locks lock then unlock. I try pushing the lock and unlock button, then just the lock button as per the instructions and I get nothing. Supposed to get one cycle of the locks if it works and tow cycles if it doesn't. I get neither of those, nothing happens. So I buy a new remote off of eBay (brand new, never used, OEM remote). I try the reprogram door dance again and get the same results. The battery in the new one reads 3v like it should as well. So I go off to a junk yard to replace the receiver door controller, I found one and replaced it and I get the same exact results.
View 8 Replies
I've recently purchased an off-lease 2007 Sonata and have the following question about the keyless entry. When I unlock the doors I notice that there is a short flashing of parking lights, however when locking the doors with the remote there is no indication.
I believe the manual says there ought be a short chirping which I am not hearing. The remote is just for keyless entry (no alarm is present). While this may be related, I find the horn sound is not very robust (actually quite puny). Is this normal for this car?
View 12 Replies
As the title states, I have a 05 Sport Trac, just plain Jane. No keyless entry, no remote start, no steering wheel tilt. Just standard. I am wanting to install a Viper 4103 remote start/keyless entry kit to it. I just don't know if I will need any extra parts? I've tried googling and all kinds of stuff but cant find a straight answer. Some sites say I need an immobilizer bypass, some say I don't.
View 1 Replies
The keyless entry for my Freestar has just started acting up out of the blue. It will occasionally work after repeated button pushing on the fob.
It does this for both fobs
It does this for all buttons on the fobs
I have tried changing the fob batteries
The door buttons inside the car work just fine
What can cause intermittent functionality of the keyless entry system? Is there a box under the dash I can unplug/replug or a fuse I can change?
View 1 Replies
I recently purchased a 1999 F250 S/D v10 5 speed ext. cab and only received one ignition key (no keyless entry fobs).
The truck does not have a keypad on the doors, but if this truck has the remote keyless entry option, how can I tell?
View 14 Replies
I have bought a used 1999 F250 4-door 4X4 7.3. Is there any way to tell if my truck came with a remote for the keyless entry. It has power door locks and windows. I was debating on calling my local Ford dealership and seeing if they could check by the VIN number.
View 7 Replies
Randomly, the remote keyless entry system of my 2009 Jeep Wrangler will fail to unlock the doors. When this happens and I then use the key in the door the alarm goes off. As soon as I insert the key in the ignition the alarm will deactivate (as it should). After the first few times I took it to the dealer and a computer was replaced. It kept happening. I took it back to the dealer and now they claim that it is normal! If I use the key to unlock the doors otherwise, no alarm. So, why the periodic failure?
View 3 Replies
If your truck came with the FOB to open the doors remote, but not the keypad on the door, you can add one. Originally the keypad was hard wired and was an expensive option. Several years later the newer keypads were RF signal just like the FOB. If you have or had FOB, then you have the keyless module on the truck (mounted to firewall infront of the emergency brake).. All you have to do is buy the newer style RF keypad, stick it to the door, and program like the FOB. I just did this on a 2002 F150.
View 5 Replies
I have a 95 f-250 psd with factory remote keyless entry. about 3 weeks ago i had a fuse blow that powers the keyless entry module, speed control, and a number of other systems.
If I replaced the fuse it blew right away so i got my wiring diagrams out and started unplugging parts of the circuit and my last attempt was to unplug the keyless entry module. presto no blown fuse so i got a module from a junk yard fixed the problem and now it has happened again. same exact thing. unhook the module and no blown fuse. i took the first module apart and saw no burned parts and no visible damage but here i am blowing fuses with no door locks, dome light and a few other things.
The fuse that blows is fuse 8. I am a mechanic and have full access to anything I need. I have another module under warantee but I want to be sure that its not something other than the module causing problems.
View 6 Replies
Whenever it is really cold, o degrees or colder and i use my remote starter, my 2011 Prius starts for about 1-2 seconds and then shuts down. If go into the car and manually start it stays running with no problems. yesterday i tried remote starting it after about 5 hours sitting in -15 degree temperatures and it worked fine but that was after i already manually started it in the morning cause the remote starter didn't work. Why this is happening? it goes against the whole purpose of having a remote starter.
View 19 Replies
03 F250 7.3. I busted a brake line last week somehow, Got it replaced and fixed up, Bled that line and everything was somewhat good.
Now, when i hit the brakes hard, I have pressure. If I let off even a little, My pedal will start to sink till i apply more pressure. I am gonna fully bleed my brakes when I'm home to see if this could solve the problem.
View 7 Replies
But when I take my foot off the brake pedal , its just seems rather noisy (clunky). As if VW forgot to put some rubber or something to prevent this clunky sound. (it just sounds cheap)
My jetta and tiguan never seemed like this. Have to stick my head under there and see whats up
View 2 Replies
I have another small issue with my 2004 Prius. I just noticed yesterday that the second I very lightly depress the brake pedal, a little clicking sound is made down below. It sounds like it might be coming from the brake pedal itself or somewhere underneath the hood. It's only when I depress the pedal slightly and it makes pretty much the same sound when I release the pedal. I just had a 5000 mile service done to the car and there were no issues then.
View 14 Replies