Mazda - Mazda6 :: Transmission Rattling When Start Accelerating Slowly From Around 1000ish RPMs
Jun 27, 2016
I just got this 2007 Mazda6 S Sport Value Edition for free from a family member. It has an automatic transmission.
While driving it in a parking lot I noticed that the car was make some kind of a rattling noise whenever I start accelerating slowly from around 1000ish rpms. After that the noise disappears. The first time hearing something like this was in a Prius I rented, though I don't think this affects performance at all. I am wondering if this is normal?
Also the car has being sitting unused for about a couple of months before I picked it up. I noticed immediately a burning smell after driving it, somewhere under the driver side, which makes me suspect if it has something to do with the transmission. I know very little about fixing cars of course but I also own a manual transmission car, and this smell kinda reminds me of a burning clutch.
The car drives great. The transmission seems to work fine. No slipping. Driving around those hills in San Francisco just fine.
View 2 Replies
Advertisement
I have a 2003 Mazda 6 and heard a rattling sound in the engine ONLY when the car is in drive or reverse, never when in Park. My mechanic said it is the clutch in the alternator that is coming apart and so the Alternator - tensioner - belt all needs to be replaced for a total of almost $800. Does this seem reasonable?
View 5 Replies
I have had this car for 4 years, and it's been driving, and handling very well overall. Lately, I started hearing a soft scratching noise when accelerating, and especially going from 1st to 2nd, and 2nd to 3rd gear. There was some hesitation before shifting to the higher gear as well. I took the car to a local mechanic, and after test driving, and listening to the engine with a tube??? he told me that he needed to change the torque converter and the pump, and quoted me for $1936. My wife immediately wanted to sell the car and buy a new one. Half of my friends said the same thing (well, at least my richer friends did), and the others said to fix it and drive it while I could do so.
So, I took the car to another transmission specialist, and they told me that the transmission was in great condition, fluids, shifting, etc. Something doesn't add up here. I know that the engine/transmission doesn't sound the same as when I bought the car, but how is it possible to have that kind of diametrically opposite diagnosis. Meanwhile, I took the Mazda to a local dealership, and they quoted me for $4500 trade-in value, while CARMAX said they would give me $2500. Needless to say, I am at a crossroad - we know we have to change the car soon, but how soon and under what circumstances, this is the question. Then, just today, another mechanic said that the engine is unbalanced, and is giving a low, and powerful vibration, and the harmonic balancer needed to be changed.
View 6 Replies
I have a 2003 Mazda 6. Almost every day, after starting it and driving maybe .10 of a mile, it seems as my car shifts, it shifts really hard, like a thump. I am thinking of having the Transmission serviced. Is this worth it? About what should the cost be? What do they do, just drain the fluid and add new?
View 2 Replies
My son's mazda 6 will turn over but not start. the things I have done:
1. replace crank sensor
2. replace cam shaft sensors
3. it has spark
4. fuel pump works
5. sprayed starting fluid in still will not start.
What else should I check? Security system?
View 2 Replies
I noticed the RPM's are higher than they used to be when accelerating slowly.
My car is an awd hybrid 600h with a CVT (110.000 miles) .. Do i have to check the transmission fluid? How?
Is my clutch or whatever it's called dying?
My car is still under warranty, but I'm not sure if wearable parts are included.
View 2 Replies
,My '98 Honda Civic EX (manual 5-speed) is currently at 200,000 miles and makes a gargling/metallic rattling noise when I accelerate from low RPMs or whenever I'm climbing a hill. The noise sounds as if loose change is rattling around somewhere in the engine. I started noticing this a few years ago, when it was very slight and it only happened in second gear as I climbed a steep hill.
Over time, it started happening in third and fourth gear, and now it is in all gears when climbing a hill or when accelerating quickly on level ground. I also notice a lack of power when this noise is occurring. In the past, if I let off the accelerator just a little bit, or if I greatly increased on the gas, the noise would disappear. Now, increasing on the gas makes the sound worse.
View 4 Replies
So I bought this 2007 used with 86K on the engine. After 2 days cats code went off and i had both replaced with brand new ones. Now my truck is making a rattling as i step on the gas at about 2500 rpms. Its sounds like metal in a can swirling around amd as i let off gas the sound stops. It happens often, also the other day in was pulling off and heard a grind for about 2 seconds then stopped never beard it again, it sounds like its coming from the rear passenger side. It sounds like a bearing. This is the noise.
IMG_4285.MOV ...
View 2 Replies
I bought a used 89' Ford e150. Automatic transmission, 194k mi. I fixed it up a bit and it is very much drivable. I just took it up to northern az and then back down. I had to have it towed recently and now my transmission is acting up. When I want to move it i put it into gear, either reverse or drive, now while accelerating slowly the vehicle doesn't move for several seconds until the transmission catches and it then starts to move. It does this now while driving and having to stop for lights and signs. It has a delay until the transmission catches. I wonder if the vehicle is dragged up on to a flatbed tow truck this can damage my transmission or driveshaft And cause this. What can I do to fix it
View 5 Replies
My '04 v6 wagon 100K will misfire in really damp conditions. Last fall after going through a massive puddle and today after sitting for a couple of days of warm damp foggy & rainy New England spring weather. OBDII scanner is reporting cylinder 3 as the one misfiring in the fall, today there were a ton of codes (that I didn't note).
So I made it about 2 miles from the house and had to turn back. No power, check light flashing. I had to put it in manual and keep the revs highish (3-4K). When I got home the exhaust manifold was glowing yellow, assuming one or more cylinders were passing fuel out to the exhaust and it was being burnt off in the manifold.
My question: could I have damaged any gaskets back there? This could be my imagination but I think I'm hearing a new noise that I'd normally attribute to an exhaust leak downstream of the muffler, very subtle - like a gentle light but rapid thud. I only hear this noise with my ear to in the front driver's wheel well. There's no ticking noise I normally attribute to leaks near the manifold. My imagination or is it easy to damage something in the circumstances I describe?
View 11 Replies
I have a 2007 Mazda 6 with 133000 miles on it. Recently it has started making a very loud sound that comes from under the hood. The sounds is comparable to the sound a semi truck makes if it is idling. The noise is not constant, usually happens when I put the car in park or if I'm driving at low speed (under 20mph). The sound lasts around one minute.
View 2 Replies
Mazda6. I have a check engine light for a random misfire on cylinder 2. I have changed the spark plugs, the injector, and even the cylinder 2 coil, but still have that random misfire. The funny thing is that it would run great within short (about 30 miles) one way trips. Lately, I have gotten a new symptom: It has started to hesitate and can feel a loss of power but only once the car has been driven for about ten minutes non stop. Can't figure this out.
View 12 Replies
I have a 2003 Mazda 6, 5-speed manual transmission. I was driving on the highway today (going about 65mph), and all of a sudden, my car kind of "jolted" (like it stalled out). When I tried pushing the gas pedal, the car wouldn't accelerate. When this happened, the check engine light (and some other lights) went on, too. I pulled over to the side, turned the car off, and turned it back on. It seemed to start fine and gas/acceleration was working. Fortunately, I was able to get home, but it started doing it more frequently up until I got to my apartment. Each time, I had to turn the car off and restart it.
Oddly enough, when the car does this and I pull over to the side, the engine is still on. However, even though the engine is on and the car is idling, I noticed the RPMs were sort of jumping between 0 and 1000, and the engine was sputtering (like it was sputtering with the RPMs jumping, the only way I can describe this sputtering is like a heart beat). The only thing that seems to work is to turn the car off and turn it back on, which will then allow the gas pedal to work, only to have it happen again a few minutes later. The gas pedal doesn't get stuck or anything, it's just pushing it doesn't seem to accelerate the car.
I've already had the engine replaced on this car last year (at 80K) and the clutch a few months ago, too.
View 5 Replies
2009 mazda6, I feel some vibration feels like wheel is out of balance coming from the front left wheel, it's most noticable at 30mph and again at 60mph. It's more noticable when i'm turning right, e.g. shiting to the right lane.
Already replaced four tires, balanced the tires and replaced front struts and rear shocks.. and it's still there!!
when shifting to the right lane, the vibration feels like da-da-da-da-da.. like I'm driving over some washboard road.
What could this be, is this CV-joint? can I ask dealer to check out CV-joint see if it's ok?
View 3 Replies
we have an 2006 Mazada 6 automatic transmission with the option of manually shifting gears. we have had it a year and the only maintenance is work on the air conditioner, oil changes, and new tires. when accelerating on an incline or sometimes during/after a curve as it shifts into 4th gear it makes a terrible noise and the whole car jerks. the best way I know to describe it is it feels as if the bottom of the car is about to fall out! when we first purchased it, it done this a couple times and basically quit doing it for a few months.
It seems to be getting worse though. we have never had a check engine light. we sent a can of "sea foam" through the gas tank and this seemed to work. a local mechanic examined it and test drove it but couldn’t find anything wrong with it. (of course it didn’t act like this when he drove it!) I called mazda dealership and they cant tell us anything without us bringing it in and charging us no telling how much just to look at it. no one seems to be able to figure this out….
View 4 Replies
Can a problem elsewhere in the system cause ignition coils to go bad? I have an '03 Mazda 6s, 147k miles, owned it since new (Dec '02). 3 1/2 ~ 4 years ago, over a period of 6 months I had to replace 4 of the 6 coils. A month ago, one of the replaced coils went bad so I had all three rear bank coils replaced (cheaper to do all three at once rather than one at at a time since half the engine needs to be disassembled to get at them). This week, I started to get the initial symptom of a coil going bad on me: Occasional stuttering in the engine.
This issue always starts when it's wet outside. The first few times it started when going through a car wash, this last time was right after Super Storm Sandy dumped a lot of rain (I am not in one of the flooded areas, NH just got a lot of rain).
View 9 Replies
I have a 2003 Mazda6, 108K miles. Had the ATF changed last December at the dealer. Prior to this, there was some hesitancy to shift into 1st when cold. Last several months, it has gotten worse. Engine revs (as much as I allow it, which ain't much) and then goes into first. Dealer thought they had overfilled the ATF, and reflushed and refilled. Said they couldn't find any other problems. There is no CEL. Problem was better for a short while after fluid change, but now back to long hesitation. Car goes into Reverse fine when cold. Once the car is warm, I don't notice the hesitancy to shift to first. How to diagnose?
View 1 Replies
MILEAGE: 65,000
Last time I was in, the shop replaced my sway bar links, which had already been diagnosed and the repair scheduled. Then, after replacing the sway bar links, the mechanic told me that the control arm bushings were cracked. They already put new struts on the front, as well. So I asked him what else was going to go wrong with my suspension. He said nothing else should need work. He also said that the car was safe to drive for a couple months but I definitely needed to get it fixed.
QUESTIONS:
Is it normal for a car with 65,000 miles to have cracked bushings? I realize that the car is 11 years old; I just wondered how much a car's mileage plays into cracking the bushings and, if so, after how many miles should one expect before cracking occurs.
Does it sound like they're trying to soak me? Why tell me one thing at a time? Perhaps more revenue from the labor side of things?
Assuming the bushings truly need to be replaced, does the community here think there is anything else that should be checked and taken care of at the same time? It is both costly and annoying to have to take the car back numerous times.
View 4 Replies
Ok my car is tripping... been like this for a while, just never REALLY bugged me until lately... Example... I am at a light put it in first, have my foot on the gas... I slowly give it some gas.. rmps start to rise. NOW! without adding any pressure to gas, it kinda jolts or studers... happens for like a split second, and than the rpms continue top raise and i go into second... So now i just rev a bit and go quickly into second.
View 14 Replies
I've noticed something new on my R32 recently. If I let the car sit in neutral with the motor on it's rpms will start to climb slowly. Normally it idles at around 800 rpm but when this happens it will climb to around 1200 rpm and stay there. Usually it takes a couple of minutes but you can slowly see the tach climbing. Also, you can feel the engine slowly revving as well (can hear it).
Now this doesn't happen all the time. I've only experienced it a few times in the past couple of weeks and only seems to happen if the car has been sitting idle with the motor on for at least 10 minutes (it happens when I've been at sonic waiting for an order). I can bring the rpms back to normal if I rev the car up to around 3.5k and let the motor settle back down to idle. What is causing this?
View 1 Replies
I have a 2005 Mazda6 4 cyl manual transmission, purchased this past holidays. Last week the clutch disk totally wore out and the car was not moving at all... AT 68000 miles only. I am a new manual transmission driver and I think I might have been part of the problem. My mechanic, who is a family friend, has replaced already the clutch kit and he found out that the clutch disc was not only worn out but actually damaged, shattered on a side. So I got scolded by him and my father as they suggested that I damaged it by doing improper shifting. They suggested that I went from 4th or 3rd gear to 1st thus damaging the clutch disc for the car to totally stop moving.
However that's very unlikely in my opinion. I don't know if Mazda included some sort of safety feature in the transmission, but the car never let me go in 1st gear if it was already in motion, the shifter would lock if I attempted (found that out when driving in stop-and-go heavy traffic). I thought my problem was due to my foot frequently flirting with the clutch pedal in order to keep my driving and shifting smooth. In fact a few friends of mine who drove manuals in the past complimented me on my driving becoming so smooth in a short time. I also think that I bought the car with the clutch kit carrying some sort of damage on it, since in the first weeks of ownership, my practice period, I would often smell a burning odor when I was not doing things smoothly. Once I got better I never smelt the odor again until a few days before the clutch gave out.
View 7 Replies
