Mazda :: 2000 - When Driving Car Started To Shake For About 5 Minutes Then Stalled
Jun 2, 2013
I have a 2000 Mazda Protege ES, with about 120,000 miles. On February 14th, Valentine's Day, my car broke down and has not functioned since then. Here's what happened, I was driving the car when it started to shake. It continued to shake for about 5 minutes, then it stalled. I was able to start he car again and it began shaking worse than before. Then it stalled again and it has not run since then.
The mechanic I've been working with has tried a new CAM sensor, replaced the computer and checked some of the electrical wiring. But nothing has worked. It's been almost 4 months and I am eager to get my car functioning properly right again.
View 1 Replies
Advertisement
I have a 2000 Grand AM cylin. Recently I was driving when my car started to shake violently. I drove it to the side of the road to a parking lot then it died. I started it up again and is ran but shacking a lot again. Once I got home, 3 blocks away the car died again. I tried to start it again but it would only turn but not start the engine. I have checked the gas pump, motor mounts, oil and anti freez for oil. I did check the timing chain but I don't know much on how it should be.
View 2 Replies
I have a 2011 Mazda 2, 1.5L w/automatic trans. The car only has 1800 miles on it. The other day i was driving it when the car started to lose power and then stalled out. I coasted to a stop. When I tried to restart the car it idled roughly and only in the 200-300rpm range. When I put in gear it would stall out. I let it sit for about 15 minutes and then was able to restart the car with no issue. Since then I put on another 40 miles with no problem.
Before the car stalled I had driven it for about 30 miles with the first 15 miles on the interstate. It was 100+ degrees outside and I was running the air. I have taken the car to the Mazda dealer but I am concerned that they will not be able to locate the problem since now the car seems to be running fine. What could be causing this problem?
View 1 Replies
My 2006 stalled twice yesterday. Was running normally, then suddenly stalled after driving for 10 minutes. Error message said something like "insufficient power available". Started up fine after that, but a few miles later had the same problem.
Some potentially relevant background. The night before these two stalls I got some cheap gas from a no name station. A month earlier my car had a really rough start and check engine light came on, but it drove fine. Mechanic diagnosed a leak in the air intake tube (into turbo, I think), and replaced it. He said he got some strange codes though. (120D, 121B, 216D, 21E0 for air mass meter and fuel trim, and also control module comm code E000, 710B, 900B).
He said if the problem reoccurs I probably need an air mass sensor replacement. Thoughts?
Given it restarts so easily, I'm not too concerned re driving the ~10 miles to my mechanic, but I'll be avoiding highways and rush hour. Or, do you think, I can damage the car by driving to the mechanic?
View 8 Replies
I have a 2003 Toyota Camry with 207K miles on it. I recently replaced the catalytic converter on it in order to fix the P0420 code. I drove the car to work the next day and the test came back under the max specs. I drove back home and everything was fine. No more CEL.
Now I have the problem where the car starts normal when its cooled down, but if I drive it for a few minutes and turn it off and back on again it stalls. If I let it cool down for a minute it will turn on but idle really rough like at 400 RPMs. At times it will stall back again.
The only other thing I did differently was pump a full tank of gas at a different gas station than I normally do. Before I changed the CAT I had no problems like this.
View 2 Replies
I have a Mazda MPV and am hearing a noise coming from under my car after I have been driving for about 10 minutes. It sounds like a squeaky hamster wheel that needs to be oiled on one side. It seems to speed up when I am going faster, but as soon as I step down on the brake pedal, it stops completely, even if my car is still moving. As soon as I lift my foot off the brake pedal, the noise is back. My car guy could not get the car to make the noise, but I hear it everyday. He checked the brakes and said they are fine.
View 3 Replies
In hot weather or even warm / humid weather, my very low mileage Mazda 626 (2002) becomes almost impossible to shift, especially from neutral to first, after about 20 minutes of driving. If I stop driving and the car cools off, it's okay again, until another 20 minutes of driving. It's fine in cool weather. This problem started in the summer of 2010.
View 4 Replies
I was driving my 99 f250 superduty and out of no where it sounded like i had blown a tire started to shake for at least 3 or 4 seconds pulled to the side of the road got out and check tires were good, got back on the road with no more problem.
View 1 Replies
I have a 2008 Miata that is new to me (<40K miles). When I first drive it in the morning it has a very noticeable bumping feel for the first couple of minutes then smooths out and is not noticeable for the rest of the day, even if I park it for a couple of hours. I believe the bumping is coming from the rear driver's side. I just replaced the tires (thinking they were flat spotted), but the problem persists.
View 3 Replies
I have a 2000 Toyota Camry CE (2.2L/V4) w/ 130,000 miles on it. Just recently I have been experiencing a stalling issue after driving on the highway for 19 miles (or 20 minutes) at a speed greater than 65 mph. As soon as I exit and take my foot off the gas the car will stall as if I just turned the key in the off position. After I pull over, turn the key in the off position and wait a minute or two, the car start right up as if nothing happening. The idle seems to be ?normal?. The engine light does not come on when this happens.
If I feel the car may stall when still on the highway after slowing down, I can shift the car into neutral and hold the idle speed high enough to continue driving. However the car will eventually stall. But again and I restart it and be on my merry way without incident. I have try switching to high octane gas, but that did not work. If I disconnect the battery for a few hours the computer reboots itself and it will take a few more trips at high speeds for this issue to occur again. I have put in a fuel injector cleaner and cleaned the butterfly value (air intake). I own an Auto Xray code scanner; however it is not showing any error codes. What this issue may be?
View 1 Replies
A year 1/2 ago my wife's car (2008 Mazda Tribute) started acting funny.
The brakes started squeaking while driving, but as soon as the brakes were applied, the noise stopped. They also had a mild grinding sound. Not a metal on metal (aka no brake pads)...very superficial. Had to slam on the brakes and it activated the ABS (light did not come on) which caused the brakes to go to the floor.
Brought it in to the mechanic we always bring it to. They changed the pads and resurfaced the rotors. I KNOW they bought the cheapest aftermarket pads. I'm sure that and because the pads weren't deglazed (I'm assuming they didn't) is what is causing the noise.
Well...brakes worked fine. Months later had to slam on the brakes again. Again, ABS activated (no light came on), brakes went to the floor. A day later it was still going to the floor.Brought it back to the mechanic. They said nothing was wrong with the brakes, but they resurfaced the rotors. Brakes back to normal.
Happened again. Noises still there. Rotors resurfaced. I asked if the cheap aftermarket pads could be the problem. Of course the shop said no. Brakes went back to normal. Well, it happened again. Had to get on the brakes. and now they are almost going to the floor.
Brought it to a shop and they bled the brakes (not sure if they pulled the ABS fuse or not). Brakes are still spongy and go down far, but not as bad. Doesn't appear to be the brake booster (put foot on brake while car is off and brakes depress when car is started). Brought it to another mechanic (thinking it was the master cylinder) and he says he doesn't think it's the master cylinder, but an ABS problem.
View 11 Replies
I have a 2000 Saturn SL 1 and it takes about 20 minutes to get started and it started after the radiator was changed and I am losing coolant and I noticed a leak around the flex on the exhaust pipe could this be the starting problem?
View 2 Replies
2 days ago my 2000 Hyundai accent Gl 1.5 stalled while driving i lost no power to my electrical system all my lights and stereo stayed on but i lost all engine power the check engine light popped on and i had to have a friend tow me home this has never happened to me before. I had sat in my yard for about a year before i started driving it again due to money problems. I did a tune up on it before I took it out anywhere and ran some lucas injector cleaner and changed oil added some oil additive and changed my air filter spark plugs seemed fine so I didn't replace them and it ran for almost a month just fine i have about 150k in miles on it then suddenly just died while driving home from work I am thinking its in my fuel lines filter or pump are clogged up but I am not sure. I am going to start diagnosing it tomorrow. I can't get the check engine light looked at cuz I can't get it started.
View 2 Replies
Three weeks ago I started my truck as usual in the garage and let idle for couple minutes. Backed out of garage and accelerated, then it stalled, started again and drove about 150-200 feet and stalled again. This repeated two more times and then I decided I better try and "limp" back to the house. It has been in at the service dept. for three weeks now and they first told me it was the fuel pumps. Now they say its the fuel transfer pump, don't know if there is a difference.
My service dept has no straight.
View 2 Replies
My '07 started making three very quite beeps while driving, happens about every 15 minutes. It sounds like it might be coming from under the passenger seat. Mileage on vehicle 168000.
View 1 Replies
While headed back to town my 2000 f350 7.3 with 444,650 miles (I'm original owner) and have performed maintenance and repairs since mile 3. Truck started to loose power and eventually stalled, was able to restart several times to limp home 7 miles in one hell of a snow storm. Very confused, replaced cam position sensor ( keep one in jockey box ) replaced fuel filter truck starts then stalls out. Don't know if a bad HPOP would allow start up at all. Fuel pump???
View 6 Replies
I have a 2000 Mazda Protoge. I recently had the air conditioning fixed and primarily afterwards (although it could have been quiet before), when I accelerate or perhaps when it is thinking about shifting gears, I hear a strange buzzing sound, like a fan is hitting a bit of metal or something. It isn't too severe, but it sounds like it might be getting a little worse. Not louder, just more often. Belt? Two things touching? Should I bring my car, or is this just growing pains?
View 3 Replies
I have a 2000 Mazda 626, V6, 5-speed with 157,000 miles. The car cuts out (as if it's loosing fuel) and stalls intermittently. This has been happening for 3-4 weeks and neither my regular mechanic nor the Mazda dealer can figure out what's wrong. Here's what they've tried: new fuel pump (replaced 3 times to make sure parts not faulty), new wires and plugs, new alternator belt, replaced fuel pressure regulator, replaced mass air sensor, cleaned/checked fuel & air filters, replaced coil/distributor (2 times to make sure part not faulty), checked for vacuum leaks, checked ignition/sensors (CAM and others).
It has been stalling intermittently for 3-4 weeks, though for a while would not do it when with the mechanic. Also, the check engine light would never come on, so there were no codes to check into. Sometimes after it would stall, it would not start up again until the engine was cold. Recently, it stalled when the mechanic was test driving it. He pulled off the mass air sensor and it started right up. He replaced that part and the car was driving OK for several days. I even took it on a couple 2.5 hour round trips. Today, however, I could not get it started. It would turn over, but not fire and it seems to me that it wasn't getting enough fuel.
View 2 Replies
When I am going between 55+ mph my car starts to shake when I use my brakes. The mechanic at the Mazda dealership told me that the brake rotors are warped and need replacing. I asked the mechanic how this happened when I have such low mileage on the car. He said that the rotors would warp if they overheated which could happen if I brake going downhill, doing a lot of city driving, or if carrying a heavy load.
My car has only about 11,600 miles on it. Monday-Friday I drive 5 miles to work each way. On weekends I drive about 50 miles on the highway. I do not ride the brakes and I can only think of two times in the 2 years I have had the car that I have had to slam the brakes on hard. Clearly, most of the brake use is during my drive to work, but that is only 5 miles one way.
I explained that I do not carry heavy loads since I normally drive by myself and maybe a dog or two. I also explained that the other situations he posted of braking when going downhill or doing a lot of city driving sound like normal driving situations, and not anything that should cause rotors to warp? The mechanic said that he could only tell me what would cause my rotors to warp and that how I drive is "on me".... grrrr. Not happy with that response at all.
I bought an extended warranty when I bought the car new and was at this time told that because the rotors are warped, as opposed to cracked, they aren't covered by the extended warranty because warping is considered a result of routine use. The repair is also not covered because I am over 12 months on the normal warranty.
Does this scenario sound right in a car with this mileage? Could I possibly have warped the rotors during a 5-mile commute to work? If so, what do I need to do to prevent this from happening again, because I am not willing to pay $350+ every 12,000 miles to replace rotors? I have been driving for over 40 years and have never run into this problem before. This is my first Mazda though, and it very well may be my last.
View 8 Replies
This mazda is relatively quiet when on park and neutral and can feel more shake (feel from steering) while shifting to drive mode while idle/before redlight. it can feel more shake while on speed over 70 mph. it feel ok on speed lower than 70 mph. Just wonder if the engine/trans mount is the root cause. The trans is on drive side and engine is on passenger side. engine inside mount has been replaced and does not solve the problem much.
View 3 Replies
I have a 99 Mazda 626 (automatic) and in the past year it has stalled out on 3 separate occasions after coming to a stop at a stoplight. The car sputters off, the wheel locks and it just dies. After this happens the car won't click over to start. However, after letting it sit for several hours, the car will start up again without any problem like nothing was wrong.
I even had the car towed to a mechanic after one of these instances. The car was towed to the shop on a Saturday and on Monday when the mechanic went to see what was wrong, the car started up fine and showed no signs of an issue. I have always been able to start it up without a problem on a day to day basis. (The car also just recently got a lot louder -- I found a sizable hole in the B pipe--so I don't think the noise is related. Anyway, I just don't want to stall out in traffic again so is it time to buy a new fuel pump or could a smaller fix take care of the problem?
View 2 Replies
