Kia - Sedona :: What Does Small OD Button On Gear Shift Do
Jan 18, 2011
On my 2002 Kia Sadona mini van I noticed about half way down a small button with the letters OD beside it. What does this mean and what does it do?
View 6 Replies
Jan 18, 2011
Advertisement
Kia - Sedona :: 2006 Won't Shift Into Reverse And Is In Limp Mode / Only Staying In 3rd Gear
Should we go to a transmission specialist or a regular shop for our issue? 2006 Kia Sedona - won't shift into reverse suddenly and is in "limp" mode, only staying in 3rd gear.
My concerns are primarily getting it done correctly and as cheaply as possible. I've read that the issue could be an input or output solenoid or maybe having to get a full on re manufactured transmission instead. But the consensus appears to be having it properly diagnosed.
So my question is, will the local shop around the corner who is pretty good with most repairs be able to properly deal with this? Or am I better off skipping them and going to the specialist?
Ford Excursion :: Overdrive Button On The Gear Shift Does Not Work
I have an '05 V10 with 74,000 miles. The overdrive button on the gear shift does not work and it keeps me in trailering mode. If I put it in park and jostle the shifter and steering wheel, sometimes it works. Also, the back-up sensors no longer work.
View 5 RepliesPrius (2004-09) :: Gear Shift Stickiness Prevents Park Button Engagement
Today, I was parking the '05 Prius and noticed the gear shift stuck in the drive position instead of the usual "pop back" you experience when you put it in drive. The park button woud not engage. The same thing happens in reverse.
The dealer said they have had to replace the gear shift on a bunch of cars with this sticky gear shift problem.
Chrysler - Cruiser :: 2007 - Won't Start Easily After Maintenance - Gear Shift Button At The Top Of Lever Sticks?
I have a 2007 Touring Edition PT Chrysler Cruiser which was just a few days ago repaired because of damage under the front of the car. Front bumper, ouside and inside grills, all housings and connecdtions in the front area were replaced, including air conditioning mechanisms. Received car on Monday, Friday evening, it wouldn't start. Just made a tet tet tet or clicky kind of noise, no turning over of engine, then there was no noise ... just wouldn't start. Got jump, still wouldn't start until the third cycle that peddle was pressed. Now I'm finding that the longer I let the car idle, the more likely it will be to start after more than two hours of non-use. Had all electrical circuitry checked ... battery's 100 percent, alternator is working fine, but it's still not starting.
Car's gear shift button at top of lever is also sticking when I put it in park to turn the car off. Have to pull the top button up to get the key out. This was happening before car was repaired underneath front. Talked to warranty person, and he felt that maybe the ignition starter switch (if that's what's wrong) and sticking gear shift may have something to do with each other. Since car is actually starting after being run, maybe it's not the starter switch. I'd hate to get it repaired if that's not what it is. Thinking about having a Chrysler dealership do a diagnostic test on it to pinpoint exactly what is going on.
What's happening? Why is my car cutting not starting in selective situations after not having been idled for a couple hours or more?
Sonata I45 (YF - 2011+) :: Small Clunk When Press The Start Button
2011 Sonata, 42,000 miles. Every now and then the car wont start. Press the start button, everything lights up. Instead of the car then starting I hear a small clunk and then no start. I DO NOT get the "Press the Brake pedal" message. The last time this happened we tried repeatedly to start with no luck. The car then sat for a day. I tried it again with no luck. I them removed the battery clamps and cleaned the battery terminals, reinstalled, put a Start/charger on and tried it again, with the same result. I then opened the engine compartment fuse box and attempted to remove the two "start" relays. They would not come out, but I was able to jiggle them slightly. The next attempt the car started normally. Started normally again this morning.
View 6 RepliesFord 6.0L Power Stroke Diesel :: Torque Shift Trans / 4 - 5 Gear Shift Under Hard Acceleration
I have been having an issue with my 4-5 gear shift under hard acceleration and know that a rebuild is due soon but I was wondering if any high performance kit available with all the clutches and friction discs needed to rebuild.
View 6 RepliesGolf IV / Jetta IV :: Can't Shift Into Second Gear After Shift Linkage Done
So i was trying to adjust my freinds shift linkage on his o2j and i got a little ahead of myself and forgot to put the shift tower in the home position before making the adjustment. after i realized you can't shift into second ( either that or 2nd and 4th are extremely close together now and feel like the same gear ). I try to get it in home position even with the cables off ( did this for experimentation) and still wouldn't go into home position...meh. still have all the other gears including reverse .
View 4 RepliesLexus RX 2010-15 :: Protruding Shift Lock Button?
Why my car is fitted with a shift lock button cover and when needed, has to yank out the cover and use the key and cause a lot of scratch damages ? The European LHD and the Asian RHD RX each has a convenient push button shift release.) I want to change the compression spring and the button.
View 6 RepliesImpala - Chevrolet :: 2008 - Interlock Shift Button Would Not Depress
I have a 2008 Impala that has been having interlock shift issues for about a week. The interlock shift button would not depress. I was able to remove the center console and take a look at some of the wiring. It there's a bundle of wires and there is a black wire that appears to be severed. From what I've read, this is a common problem with the Impala models from 2006 through 2008...it should have been a recall, but for some reason was not. How can I do a low-cost DIY repair on this that's going to be solid and prevent recurring problems?
View 3 RepliesGolf IV / Jetta IV :: Very Hard To Get A Smooth Shift From Gear To Gear
Background facts:
Tranny swapped from my 4 speed auto to a 1.8t o2j 5spd
13lb. Light flywheel
Powerflex dogbone mounts
Peloquin LSD
The problem: Very hard to get a smooth shift from gear to gear. Trust me, I know how to drive, but I can always feel the car shifting into a different gear if you know what I'm saying. On my friend's bone stock Jetta, I just let the clutch out without gas in between shifts and you don't feel a thing.
On my car, you feel EVERYTHING. People have told me the light flywheel will make the ride more uncomfortable in many ways, especially since the RPMs drop much quicker in between shifts than stock.
Ford F-150 - 1997-2003 :: Overdrive Button Blinking On Shift Lever
So I drive a 19 97 F150 v8 5.4 4x4 and while on the freeway I noticed that my overdrive button was blinking on the shift lever. The truck wasn't driving any different than usual, so Im just trying to figure out what this means.
View 1 RepliesFord Super Duty (1999-2016) :: When Taking Off Truck Will Not Shift Into OD Unless Cycle The Button On Shifter
I am having a bit of an issue with my new to me 2002 F350 V10 Ford, I have noticed a few times in the when taking off (first time after being parked)the truck will not shift into over drive unless I cycle the button on the shifter, after that the OD seems to work fine for the rest of the trip. Second thing I noticed is the "OD" light on the end of the shifter will come on at times (indicating the OD is off) even when the truck is in over drive, wiggling the shifter makes the light go out and the truck will not change gears. Would a new gear shifter fix this as it is a bit sloppy?
View 3 RepliesAccent RB (2012+) :: Small Jerk Like Engine Is Stopping Or Gear Shifting And RPM Fell To 0
I have a 2012 GLS automatic with 78,000 miles on it. Till now I never had any issues but recently I started having issues with starting the car. Its taking few tried to get it started. This happened 3 times and I got it checked at 2 places and they said everything (battery, starter, alternator) looks OK and they may not be able to find the issue until car breaks down as issue looks intermittent.
Later one time, I was driving on local road and car kept moving but I felt a small jerk like engine is stopping or gear shifting...and RPM fell to 0 but car kept moving. I stopped on the shoulder and turned off the ignition. After few trials, car started again and moved fine. This same issue happened today morning on the fwy when I am driving at 70 mph. It started after few trials.
Volkswagen - Eurovan :: 1995 Auto Transmission - Small Chirp Noise When Shifts Into 4th Gear
I had a small chirp noise in my Van when it shifts into 4th gear. Took it into United transmissions for a total rebuild. First rebuild had the same noise so they did it again and it came back with the same noise.at that point they said they don't know what it is. I can find no one in this state that will rebuild the Tranny.
View 5 RepliesGolf VI R :: Press Down Start Button When Car Is In Gear Now DRL Don't Turn On
So I went to my garage, and wanted to go warm up the car. Didn't realize it was in gear (since i don't sit in the car but just reach for the clutch and press the start button). Apparently it was in gear and it jerked forward.
Now my DRL's don't turn on when the headlights are off. When the headlights are on the DRL's turn on but is dimmed which is normal.
Prius (2004-09) :: Red LED Light On Power Button - Car Still Shifts Into Gear
I have a 2007 Prius that I bought in October. Haven't had any problems until now. Took a road trip to Reno (from San Francisco), and on the way back, when starting the car (break fully pressed), the power button's LED would light up red. The car, however, still starts, and shifts into gear.
I had read that when the LED button is red, it is in accessory only mode and won't shift into gear. This is not the case, though, since I drove the 4 hours home without problem. We made multiple stops on the way home, and every time the light flashed red, then started as normal.
What is going on? The closest I could find is that perhaps it had to do with the 12V battery, but, who knows, since I'm not getting the red triangle of death light or anything else abnormal.
Touareg :: Transmission Handle - Gear Lever Button Remains In Depressed Position
OK, this happened again. Driving along, try to change from drive to sport, gear lever button (silver on side of gear lever) remains in the depressed position. Can't get our of Drive or Neutral. If you switch the car off it will never start again!! I call McDonald Automotive in Denver and then drive all the way from Breckenridge with the car stuck in Drive making sure I would never get into a position where I would have to reverse. Also the key is locked into the ignition. McDonald has a loaner waiting for me. However, this seems like it could potentially be a dangerous flaw in the gear lever mechanism. It is very unnerving, almost like you cannot stop the car under certain circumstances (even though you can put your brakes on and stop and you can put it in Neutral, but you cannot switch the car off).
View 5 RepliesCamry :: 2003 V6 Won't Shift To 4th Gear
Today my camry suddenly won't shift to 4th gear, so at low speeds, up to 40 mph, rpm reads 1.7 to 2, if i try to accelerate faster, the rpm goes up until 4.5 maybe at around 70 mph, poor acceleration and the driving feels heavy and unnatural.
I replaced the engine mounts a couple of weeks ago after waiting for about a year to do that, not sure if the two things are connected.
S-10 :: Transmission Hard Shift Into 2nd Gear?
I get a hard shift into second gear, it jerks into 2nd but not all the time. I only notice it after driving on the freeway for several miles. It has 60,000 original miles. Service Engine Soon light come on after the hard shifts with a transmission fault code. I reset the Engine light and let it set 20 or so minutes and it shifts like new.
1997 CHEVROLET TRUCK S10 2WD
6 Cylinders 262 X 4.3L SFI
Automatic
Volvo :: 92 940 GL - Gear Doesn't Want To Shift Into The Next
I have an automatic 1992 940 GL and it has been almost a year since the head gasket blew in the car. The gaskets and everything have been replaced as well as the fuel filter, transmission pulley, and timing belt. The car seems to run fine except for a small problem with the gears. When driving it's like it doesn't want to shift into the next gear unless you let off the gas a little bit which then it shifts over fine and it does this for all for gears. It has also recently started back to stalling out at a stop light or stop sign but very rarely.
View 1 Replies