My 05 Jetta TDI is intermittently making a rubbing/grinding noise. Not in stop and go traffic but when I come to a stop at a stop sign, but only just before I come to a complete stop, not as soon as I hit the brakes. The shop that put the brakes on (about 18000 miles ago) looked at pads, rotors and pedal but said it's all fine. Could it be the booster, abs, or something else completely?
View 3 RepliesThe steering on my wife's 2010 Tiguan makes a bit of a grinding/rubbing noise at low speeds? Something isn't right, it sounds the same way my X5 did when the Rack needed to be replaced. It would be strange to have 2 cars needing new racks within the same year....especially since they are both 2010 model.
View 9 RepliesJetta starts making a noise on the front left side when I turn sharp rights like in parking lots. There is no VW dealer within a 2hr drive. Take it to local auto repair shop. The guy says it's the wheel bearings on the front left. The Jetta makes a different sound originating from the left front than originally still when turning right sharply.
BTW this sound isn't very loud and is not grinding or popping more of a whoopwhooopwhoooop Go home take off tire. One lugbolt twists off with fingers. First bad sign. Rotors on front not pretty but pretty smooth brake pads look brand new. Still really thick no uneven wear.
Do a sharp left u turn to get to auto parts store. Afs/bulb failure pops on. Solid warning light yet all the bulbs are working fine.
Turn car off. Go buy rotors. Ask about light no one knows. Go back out start car. Light is gone.. okay that was weird.
Replace rotors anyway so they are nice and shiny lube up the important parts. Put everything back together.back out of garage stupid bulb light is back on... restart jetta Its off.
Start driving everything sounds fine... parking lot test left turns quiet right turn SAME FREAKING NOISE. It has never made any noise when driving straight or on curvy road just sharp right turns.
Background: 2003 jetta; just changed rotors and pads on rear wheels a month ago, they are disc brakes
So the other day I was driving in a school zone at about 20 mph when I heard a VERY loud sound, like I'm dragging metal. i might also describe it as two rusty metal plates being rubbed against each other, but really really loud.
The noise is related to speed, it sounds cyclical and speeds up as the wheel turns faster. It occurs when I am NOT braking.
I parked the car and came back to it a few days later move it and the sound disappeared for the first 100 feet and then came back.
We did 2 things - we changed the caliper, and we also noticed that a caliper bolt was missing. I am pretty sure the noise was coming from that missing bolt - i think the caliper became dislodged and was making contact with the rotor. The caliper also seemed to be dragging a little bit so we went ahead and changed it too.
This just started on me not even an hour ago. I hit my switch and the window will go down all the way and the motor will continue running making a grinding noise until I hit the switch again. Same as when it goes up all the way. It stops at halfway and makes the grinding noise until I release and press the switch up again. Is this just the motor teeth going bad or are the cables getting frayed out possibly? Haven't had time to tear down and inspect yet.
View 4 RepliesOur 05 Corolla, 160,000 miles, has started making a grinding sound when we upshift into 3rd, unless we let the rpms fall to below 1000. My husband said the clutch needed adjusting, but the dealer said this clutch is not adjustable. The dealer found nothing wrong and could not get the car to make the noise while in the shop. (It did actually get better for a while but got worse again almost immediately after the visit to the dealer.)
Our other car (a Saturn) has over 250K miles on the original clutch, so I don't think it's our driving. What could be wrong, and is this something that needs to be addressed soon lest we damage something irreparably? Also, this car has, since purchase, been nearly impossible to shift on the coldest mornings. Really, sometimes it is all I can do to get the lever in reverse to back out of the drive in winter (in Kansas). Warming up works, but it seems to take an inordinate amount of time before shifting is"normal."
Have 2005 excursion. Just did ball joints , wheel bearings all of them, axle joints and seals.Also warn manual hubs. Have a intermittent scraping grinding noise sounds like driver but could be both front.4wd works fine in high or low, no vibration just this annoying noise. took brakes apart and no funny wear or foreign object in dust shield.
View 3 Repliesnoticing a few issues with my 2003 jetta 2.0 when driving/shifting....so first main thing I noticed is when shifting from 1st to 2nd gear often times it will make a grinding sound and not shift smoothly from 1st to 2nd....you have to do it real slow/gingerly ...if I short shift from neutral to 2nd its fine or if down shifting to 2nd its fine...I have changed the gear oil...other sounds idk if its my tranny or engine but if going up hill and you throw into 3rd and not going fast enough its makes a rattling sound and is sluggish I know its a old car 177,000 miles so idk just curious if this is a sign of problems?....Last thing after driving and getting home and putting into reverse gear to park it makes a noise like a chugging sound when reversing and can be finicky going into reverse.
View 1 RepliesMy 2005 Jeta GLI is making some crazy noise when i turn to the left from the driver side I tough the problem was the axle so I had the front part replaced and the noise still there I don't know what else needs to be replaced ....
View 10 RepliesI have a 1999 (new body style) VW Jetta GLS. 4cyl, 2L engine. It has been chocking intermittently. there is no set pattern of when it chokes. it chokes at speeds above and below 60mph. it usually chokes at constant speed; non acceleration...BUT it has choked while accelerating from stop. the heater is sometimes on and sometimes off...my point is there is no set pattern. THE THING IS....every time it chokes, there is a clicking at the dashboard. just one click per choke/jerking. the dash lights and the headlights do NOT dim or flash at all. THERE IS NO CHECK ENGINE LIGHT illuminated in the dash or any other warning light. the choking has not caused the car to stall or shut off....although there have been times when it almost did.the car has been tuned up...plugs, wires, fuel filter...timing belt and serpentine relatively new.
View 6 RepliesMy 03 Jetta TDI wagon, with 210,000 miles, had a grinding sound about 10% of the time when I braked, BUT ONLY AT UNDER 5 mph...that is the last couple of seconds before completely stopping. The car braked fine, but the periodic grinding worried me. Two weeks ago, my mechanic couldn't reproduce it; today, however, we did and he identified it as the ABS (and I remembered that sound from the couple of times the ABS has kicked in during winter driving. But my question was safety, and my mechanic says the car brakes fine...he has checked them all around and driven with me...and the fault is the ABS system and not the brakes themselves. Need to verify this? The car runs fine (I am the original owner, and for the first 7 or 8 years had it solely dealer maintained) and I plan a road trip this summer, but I need a little more comfort that the ABS acting up won't result in a more serious problem.
View 2 RepliesMy daughter drives a 2005 Passat station wagon, has a small child and one on the way. She has had intermittent problems with the car just not wanting to crank. After sitting 15-20 minutes it will crank. But the wait and not knowing if it will crank is taxing me and her. Especially since she has another one on the way. She has taken it to a reputable mechanic. They kept it for 3 days, cranking it on and off without a problem, and told her they couldn't find anything.
View 3 RepliesI just recently I have been experiencing a rubbing/grinding noise from the rear right wheel, also it has made a clonking noise like a flat tyre but it isn't, I can hear the noise from about 25/30 mph when I go faster or slower i cant hear the noise.
View 2 RepliesI have an 04 dodge ram. I have recently encountered a chirping noise at low speed (it may be there at higher speed, but I can't hear it over the engine). It sounds like rubber, rubbing against itself or birds underneath the truck. The noise speeds up and gets a bit louder as I accelerate. The sound generally goes away or I can't hear it after 25-30 mph. This only happens when in motion, so I don't think it's the belts. I've read a number of things from CV Joints to Bushings and not sure if it's either.
View 3 RepliesWhen I drive my prius and make sharp turns or any sort of UTURN, the wheels lock up, automatically brake and there is a grinding noise as if the wheels are rubbing and there is a beeping noise. I took my prius back to the dealer for warranty repairs and the problem persists. is this a normal thing?
View 1 RepliesJust recently bought a 04 gli. When I shift in to 3rd and let off the gas there is a weird grinding rubbing like noise. It only makes the noise when it's in 3rd gear...
View 3 RepliesAt 120k miles, my 2003 Camry LE 2.4L started to make some noise when making sharp right turn at low speed (below 5mph) going forward. It sounds like the tire rubbing the fender or somewhere, not metallic, and it's periodic, at 2-3Hz or so. It comes from somewhere on the driver side but I'm not sure. The car doesn't make noise when turning at stop or backing up or going straight, and the noise seems to disappear if turning at higher speed (maybe the turn is not sharp enough).
First I suspect the tire is rubbing the fender. But after inspection, no rubbing marks can be found, and there seems no rubbing when the car is parked and the wheel turn all the way to the right. Then I suspect a bad CV axle. But the boots seem in good shape with no leaking grease, and there's no noise when backing up.
Last night on my way home I was cruising took a wrong turn and had to make a u turn. While making the turn i noticed a light rubbing scrapping noise when i had my wheel turned to the passenger side. I got out made sure nothing was suck to the wheel or under the car. Heard it all the way home, got up this morning checked car again nothing seemed wrong drove to school noise was gone.
View 10 RepliesMy new 2013 Ford Explorer Limited (5000 miles) recently started making a grinding/rubbing noise with a slight to significant braking action in the middle of turns (typically left turns, at moderate to slow speed, e.g., at stoplights) when my foot is on the accelerator, not the brake. Lasts about 1 second, happens once a day or so, typically when the car is cold. The dealer was flummoxed, tried replacing the steering gear, but the same thing happened as soon as I drove out of the lot. Apparently no codes showing on brakes or ABS.
View 2 RepliesJust got a 2010 lariat supercrew...I put 1900 miles on it so far. When slowly letting off the accelerator (doing between 20-30 mph and between 1000-1500 rpm) there is a distinct rubbing sound for about 1-2 seconds...it is now sounding more like grinding now...took it to the shop today...(they couldn't duplicate (because service rep documented 60 mph instead of the 20-30 mph...went back at the end of the day to ride with the tech, and i was able to duplicate so now they have something to work with....also the noise happens mostly when the path of travel is either level road or slight to great incline..it has not happened on a down slope....
View 14 RepliesI recently acquired a B4000(for a steal!), had it almost a month now and im starting to notice a few problems, all driveline related (I think).
1. Have a "grinding/rubbing" noise in a LEFT turn only. It is a 4x4 and I haven't turned a bolt on it yet, save for very minor stuff. Since this particular model has some costly parts, I'm trying to prevent buying unnecessary parts! I have a set of 31 x 10.50 on it, and even though there is some minor tire rub, im 90% certain this is not the case.
2. Has a somewhat "hard" shift when going into O/D(I think), doesn't do this all the time, I wonder if problem #2 and #3 are related.
3. Appears to be about 1in slack in the rear driveline, wondering if it is the rearend, and specifically the spider gears or pinion?
4. Also seems to be just a LITTLE slack in the front left CV axel, is this something I should be worried about? the front right is good and tight, Tcase shifts like its suppose to.