Jeep - Liberty :: 2012 - Squeaking From Under The Hood When Accelerating - Brake Caliper Slide?
May 10, 2015
I recently had a dealership mechanic check out a couple of annoying noises my 2012 Jeep Liberty had been making for a few months. The one that really bothers me is a squeak coming from under the hood. It squeaks pretty constantly when I'm accelerating at all, only stops when I brake. Now, I'm totally clueless about cars and I realize how easy it would be for me to be taken advantage of, but I don't want to be bitchy to the guys fixing my car. I was told this squeak is the brake caliper slide so I told them to go ahead and fix it. The guy comes back 3 hours later (had to order the part) and says he's replaced the part and did all he could but it still squeaks. Am I being jerked around? Should I just take it elsewhere for a second opinion?
View 11 Replies
Advertisement
I've had an intermittent rattle for a bit on front drivers side. Checked sway bar links and they are good. I grabbed the caliper and it actually rattles at the slides. I replaced the slides last week on the front end and still rattles. Passenger side is good, but drivers isn't. How to address this?
View 2 Replies
I own a 2010 Jeep Liberty and this is my first RWD vehicle (when set in the normal 2WD mode of course). I notice that whenever I accelerate from a stop, on even a slightly wet road, the rear wheels spin and I get the traction light on my dashboard. I then need to take my foot of the gas and accelerate ohhhh soooo slowly. I've never had this kind of wheel spin on my previous AWD or FWD vehicles. Is this a known "feature" or RWD vehicles? Or maybe my one year old tires are inadequate? With my Liberty I could try switching to 4WD LOCK mode before attempting the acceleration to see if this works.
View 19 Replies
My ABS light and brake light come on within a few minutes of starting in gear. The brakes work fine and the brake shop says that the system is working fine, but I can't get the dang warning lights to turn off.
I've read online that it might be the sender mounted on the rear differential of my 2005 Jeep Liberty.
View 3 Replies
I had a line blow on my steering rack, and I was taking it to the garage well I decided to add some power steering fluid but instead I added it to my brake system , (yes I know it was bonehead move on my part when I do know the difference). Any ways I drove my 2008 jeep liberty about 5 miles to the garage, they are changing my rack and pinion because the initial problem, but my question is do I bite the bullet and change the master cylinder, brake lines and calipers??? I do a lot of driving on highways , and I am been getting mixed answers yes change it all and no just flush it out.
View 9 Replies
Replacing remaining three calipers on my 2006 F-350 2wd as a preventative measure after I had a drag on the left front. Passenger side front being difficult. Caliper won't slide off pads. I believe pins are stuck but it doesn't seem they've got the caliper stuck - appears that I can't get pistons to stay compressed enough to clear pads. Caliper has some wiggle on pads - just not enough.
I tried multiple C-clamp iterations but can't get there just yet. I'd rather not fool with the bracket and removal won't fix my problem, just allow me to work it on the bench. I do have a replacement caliper, so damaging it to get it off is an option. I have sprayed Kroil into the piston seals in a Hail Mary when I pick this up tomorrow.
View 11 Replies
I bought a 2012 Hyundai Accent GLS just two days ago. It has about 38,000 miles on it. It's an automatic as well. I drove it home on the highway and was averaging about 44 mpg the entire time. Even while driving in town, it's got pretty good fuel economy. Everything about the car is great.
However, last night, I was driving around. When I came to a stop at a stop sign/red light/etc. and then proceeded to accelerate, I would hear this weird squeaking / creaking sound. I've heard it multiple times now since then. It doesn't do it every single time I accelerate, but when it does, it lasts for about 3 seconds and then stops. I've also noticed it does it sometimes when I make a turn and then accelerate. It's just a squeaking sound.
Is this something I should be concerned about? It doesn't do it every single time I accelerate, but when it does, it will last for about 3 seconds. I should also note that the car made the noise the first night after I had been driving for a while, so the engine wasn't cold or anything.
View 15 Replies
My 2006 (with conti contacts, still in good shape) seems to behave differently from my 2004 (pirelli scorpions).
When accelerating and turning together (doesn't need to be a sharp turn, can be gradual), occasionally I feel my back seem to "slide" a bit. It's a strange sensation and I can't seem to really place it. It doesn't feel like I'm fishtailing, more like the outer rear wheel in the turn is accelerating a little too fast and pushing my rear end a bit too far too fast.
It only happens for a second and then everything is normal again. I haven't had any troubles with my 2006 beyond this (besides the DVD nav issue). But it does give me a bit of concern, as if the AWD system is a little "off".
View 9 Replies
i stared my jeep today and when i was driving it wont go pass 45m and doesnt wanna accelerated...
View 5 Replies
I have Jeep Liberty 2002 with 100300 miles. I having starter problem and the starter was replaced with a new one. Still I am having the same problem, the car can only re-start 30 minutes or more after I shut it off. The mechanic stated that he does not know what it is causing the problem.
View 11 Replies
2003 Jeep Liberty Sport, 156 K miles, Check engine light has been on for months now. First occurrence was when driving, and car started to knock as though I was shooting 50 cal machine guns. Stopped vehicle, shut off, and upon restart, engine ran smooth. Now, almost every time after engine has been running a while, and I am going on a down slope, the check engine light starts to blink, and engine starts to miss. Took to my mechanic, and so far, I have been told and have replaced, Fuel pump, Spark plugs, coils, and wires, cam sensor. Latest and most recent with promise that this has to be it, I replaced engine computer.
View 16 Replies
I have a 04 3.7L V6 Jeep Liberty with about 114K miles on it. It started happening recently that when I turn the key nothing happens. I have to put my foot on the brake, shift thru the gears, back to Park, take my foot off the brake, and then the car will start. Not quite sure where to start...
View 3 Replies
My 2004 Liberty just started this a couple weeks ago. When sitting still, the AC blows hot air. It cools down nicely when you start moving. This makes traffic lights and people who don't go when the light turns green VERY annoying. While waiting, I can hear the compressor coming on and off. Thinking perhaps the radiator fan wasn't coming on, I looked at the radiator fan fuse, 40 amps, and it looks fine. I even checked it with an ohm meter. With the car sitting still, engine running and AC on, I don't think the radiator fan is going. Maybe one of these two relays?
Important details (or not)5 speed transmission125,000 miles"What color is the car?" Blue.Two wheel drive. (alas, it's a Jeep in style only)
View 7 Replies
My radiator fan is not turning on in my 2002 Jeep Liberty. The belts look fine and it turns by hand. My radiator overheated last summer but since has been fixed now my fan doesn't work, but hasn't overheated. No parts of the the radiator or fan were removed. We fixed a part in the water pump this past sunday and when we had the engine running for about 15 minutes, the fan did not turn on or even act like it was going to try. What the issue could be?
View 9 Replies
I have a 2006 Jeep Liberty Sport. The key is stuck in the ignition. It will still start, but when I go to turn, it's like the key doesn't want to release those last few steps. Which is as safety issue because my car is sitting ready to be stolen. When I called the dealer they wanted to charge me, just to figure out what is going on with it plus labor and parts to fix it.
This is a known issue with the '06 Jeeps and Chrysler is not wanting to do anything about it. At this point, I just need the key out of the ignition. The dealer said they would have to pull the ignition system apart to get the key out which would cause the car not run at all. We tried tapping the key to get it to release and it hasn't done it yet. It did this once before and we where able to jiggle the key and it released but it is not working now.
Again it is a 2006 Jeep Liberty v6 3.7 Liter Engine it is now sitting at about 78000 miles happened the first time at about 50-55000 miles.
View 3 Replies
Following on the recent storm (Sandy) I got to my car and realized that water was leaking in from somewhere near the dashboard. Subsequently, it seems as if the electrical panel has been affected. Initially, whenever I pressed the brakes the back wiper of my Jeep Liberty (2003) would come on. That has subsequently stopped. However, now when I turn the car off the radio continues to play and I have to turn it off manually, the clock no longer goes off and the horn no long sounds when I turn on the alarm.
I took it in they hooked it up and said they couldn't see anything wrong with it. They had never seen the problem before, that they called the dealer and they had never heard of anything like that before. I have subsequently used sealant on where I think the leak originates but don't think I was particularly successful. So the problems are how do I deal with the leak and what might possibly be causing the radio, alarm problem. I should also say that I was out of town for a few days right after the problem and when I came back the car would not start so apparently there is some kind of "parasitic drain" on the car but again no-one seems to know what, where, or why.
View 1 Replies
i have a 2002 jeep liberty.the cv shaft is popping.do i have to replace anything besides shaft.to fix jeep.
View 4 Replies
I stop to put gas in the car, put the hose in and set the "latch" so I don't have to hold the hose (which I have done for years) What has started to happen is the hose does not shut off and gas spills out. I have tried holding the hose with the latch in place, and then readjusting the height/level that the hose is at,, it still spills over... since this is something new, what is going on !
View 3 Replies
I drive a 2004 Jeep Liberty which currently has about 67,000 miles on it and is in relatively good shape. For a while now I've been noticing that my CEL will come on randomly while I'm driving and flash 10 times before stopping for an indeterminate time. At the time it occurs I could be doing 70 on an interstate or 35 on a city road, doesn't seem to matter. I also don't notice anything else with the car at the time. No jurking, no sounds, no nothing - seems to be running fine. I've tried taking it in to shops after I've seen it but they are never able to pull anything off of the error codes. I've now been driving with this phenomenon for over 5 years so whatever it is seems to not have been as serious as I would have expected but I do think its starting to happen more often now than it used to.
When I try and manually pull codes I get the "donE" screen with a random number that flashes super quick before disappearing. Had to use my phones slomo mode to even try and capture it. it seems to just be a number "867588". Quick video showing what I mean .....
View 6 Replies
I have a 2005 Jeep Liberty with about 129K. The car overheated and resulted in changing the head gasket and piston rings. Now the car will not start with all six spark plugs installed. It will only start and run for a short period time with three spark plugs on the driver side installed.
View 19 Replies
I have a Puzzler-worthy issue going on with my 2002 Jeep Liberty (LTD, 4WD, V6). A few weeks ago, it started to stutter when slowing down to a stop, and then -- after a few times of doing that -- began the bigger problem of completely stalling out/shutting off once at a stop (in traffic, at a light/stop sign). It starts up fine and idles fine from a stopped position; it's only when I drive and slow down and come to a complete stop that it has the issue. The shop I go to is a great Jeep-based shop, and they've:
1) serviced the (quality, few-year-old Interstate brand) battery. Initially, it was a bit drained, but they charged it up and made sure nothing else was draining it. I went to drive it home but it had the issue, so brought it back.
2) cleaned the idle control sensor. They found it was a bit gummed up, affecting airflow under 10MPH. Said that did the trick for them with multiple test drives but then I went to drive it home last night and it did some stuttering on the way home when I started coming to a stop. I tried not to get frustrated; "Maybe it's going to stutter a wee bit now and then," I thought. "No complete stall-outs = good." But this morning driving to work it stalled out nearly every time I came to a stop. I took it back in and they're going to keep investigating.
View 10 Replies
