Isuzu - Axiom :: Screeching Serpentine Belt When Turned On
Jun 29, 2012
2002 Isuzu Axiom screeches when turned on. If AC on, AC works fine but car screeches almost all the time. Can hear me coming a mile away. If AC is off, car stops screeching once running a moment. My mechanic said more torque on serpentine belt when AC on so he changed serpentine belt a few months ago and currently belt appears to be moving fine. He says compressor operates fine. Started about 6 months ago right after new transmission put in at dealership under Isuzu warranty. Mechanic stumped and waiting for something to break.
View 6 Replies
Advertisement
I have a 2002 Chrysler Voyager with 135000 miles and in good shape. My mechanic has replaced the serpentine belt 3 times in the last 24 months each time using a different manufacturer. The last time was <6 months ago. The tensioner pulley was replaced 10 months when the screeching noise returned as it has each time the belt is replaced. The other pulleys all seem to work fine. I use a small fingernail sized dab of NAPA's "Sil-Glyde" lubricant on the underside of the belt every 150-200 miles. I will use it more frequently if it has rained recently.
-AC works fine and is not associated with this screeching
-PS pump works fine and shows no leaks. Rack has been replaced. PS fluid system flushed and filled with new fluid.
-Alternator runs fine
View 7 Replies
I have a 2007 ES350. It started making a vibrating noise and sometimes screech coming from the serpentine belt area. It stops when I turn off the A/C and also stops when I accelerate with the A/C on (only does it when idling).
View 3 Replies
We had the transmission rebuilt on Oct 1, 2013. Since then the check TOD light has flashed steadily. The transmission guys could get no codes on their equipment. We took it to another mechanic who replaced the speed sensor, light still flashed so he took it off. Finally found a way to get some codes which indicated neutral safety switch. He tried that, light still flashed, part removed. Tranny was leaking some fluid, so back to transmission shop. They had it for a week, fixed the leak, but could find nothing wrong with TOD, even from ATSG, so we took the car back.
View 3 Replies
Serpentine belt on a 2006 Honda Odyssey fraying and then ripping into the timing belt causing that belt to break? I recently had this scenario given to me as the cause of my recently replaced timing belt breaking.
View 11 Replies
2006 6.0l ... I've read all over for tips on routing this belt and everyone plays it off as being some simple '20-minute' task. I'm on my 4th hour on this now.
I can't figure out how to route the belt around the tensioner pulley, circled in the picture (from another thread). Everyone glosses over how to do this and I can't figure it out.
It seems like the only way to get it on is to bend the belt and slide it between the pulley and the block, but that I just can't reach the blasted thing.
View 4 Replies
Know that squealing sound a belt makes when it's loose and needs to be replaced? Well what is it when you hear that sound, but you know it's not a belt? It happens intermittently, usually when the car is cold...and it's been happening more and more lately...like whatever the problem is, is getting worse
View 8 Replies
I am very concerned regarding how often my serpentine belt needs to be replaced. First time it was replaced at 104k, second time dealer replaced it at 126k, third time at 153k. Today I went for oil change (173k) and the dealer told me that it has little cracks and recommend replacing it. Is it normal? Could it be something else is affecting it?
View 11 Replies
I have had my Tiguan S for almost 2 years and it seems that I keep having to get it towed. I just had it to today because the serpentine belt came off when I was driving. After I bought it the fuel line was loose and it had to get put back on and after about 12000 miles my tranny went out and had to get replaced.
View 2 Replies
I have troubles with what I thought would be a basic job: removing the belt on my 2004 Solara so that I can remove the alternator. I can't get the belt loose enough to slide it off, no matter how hard I try.
The wrench I'm using is about 12" long, I'm a big guy and I've done powerlifting in the past, meaning I can apply lots of strength on that wrench. I've just watched a youtube video of a guy with the same engine removing his belt, and he exerted a lot less effort for a lot more wrench travel. I thought that using a breaker bar is extreme.
View 9 Replies
Pulled off front bumper today with no success, seems like the whole radiator and a/c unit must be removed?
View 5 Replies
So the PO of my Jetta had the alternator replaced...awesome! One less job for me to do. My serpentine belt went out yesterday so I chalked it up to being old. When I got the new belt on it kept slipping off, I pulled the tensioner pulley off and saw that the wheel was all chewed up, I look down and saw that whoever put in the alternator didn't bother to screw in the bolt all the way and it chewed up the belt and everything else.
View 1 Replies
My daughters 96 cav has a bad squeal coming from serpintine belt. I tried belt dressing and it threw the belt. I didn't notice any cracks/dry rotting on belt. I put the belt back on but it is still squealing.
View 1 Replies
I have a 2010 camry SE & have found nothing about how to change the serpentine belt on the 2.5 engine.
View 1 Replies
Can a frayed serpentine belt cause a clunking/grinding noise? The clunking grinding noise has been going on for about 2 months and it goes on and off, Last night it started squealing and I checked the drive belt and it is frayed on the outer edge.
I have a 2005 Prius with 86,000 miles. All of these issues started about 2 months ago, the day after an oil change.
View 2 Replies
Serpentine belt break? My 2005 Prius has 132,000 miles on the original belt, so I thought it's probably due for replacement. I went to an independent garage to get an estimate ($80). But the owner said that he has never heard of one actually breaking. He said that they are reinforced with fiberglass, so they just don't break. He recommended that I look for missing chunks and listen for squealing.
View 2 Replies
I looked through the MKIV DIY stuff but didn't see one. My serp belt is in need of replacing soon. Seeing some cracking on it for sure. According to records from the PO it was bought as part of the timing belt kit at the end of '09 so I imagine it was changed then...just didn't think it would be so cracked so fast!
Anyway, looking to replace it in the coming weeks. If I could be pointed in the right direction that would be awesome. I do have a Bentley, but I find how-to's on here to often be better. But if I need to just follow the Bentley, I can do that too.
View 24 Replies
I've been hearing a slight squeaking near the belt area. It's not continuous. Does it for a second then stops for a second and continues.
I hear it a lot more when I put the heat on through the top window (defroster). Never noticed it until it started getting cold. You think it might just be the belt? Or what?
View 2 Replies
I need to replace the serpentine belt on my wife's 2001 Santa Fe 2.7 V6 but I can not seem to figure out how to get the tensioner off.
View 1 Replies
So this car has only 50k miles. It was really cold in the sierra (around 20F) and the car started making a squeaking sound. I assumed it was just belt warming up, but when I opened the hood later, I saw shredded plastic. No CEL's! Seems to run smooth.
Where this came from? Is it part of the serpentine belt system?
View 20 Replies
I have changed belts on other cars just never a Lexs. how hard is it to do on or trucks?
View 7 Replies
