Impala - Chevrolet :: 2008 - Shifter Not Able To Move Out Of Park Without Hitting Button Inside Center Console
Oct 27, 2015
I drive a 2008 Chevrolet Impala. The car has had some electrical problems going back about a year and a few months that I have neglected to fix. The first problem was with the shifter not being able to move out of park without hitting the button inside the center console to do a shift lock override, which started last August.
The second problem was with the ignition not being able to release the key without hitting a switch inside the ignition, which started back in the Spring. I have just been rolling along promising to eventually address those, but yesterday the car radio stopped functioning. Then this morning the car would not start.
The electrical system comes on just fine (save the radio), but when I go to start it the car just clicks over. I did not leave any lights or switches on, so I am assuming it must be some sort of problem with the electrical system.
View 19 Replies
Advertisement
My cousin has a 2007 Ford Taurus with the pushrod 3.0L. It has the console shifter and it is hard to move the shift lever into Park from Reverse. The shifer moves out of park and to every other gear with normal effort. The gear indicator correctly displays the shifter position. It drives/shifts perfectly fine. The only problem is that it is hard to move the shifter from Reverse into Park. It feels like there is a rubbery, or somewhat mushy threshold/resistance that needs to be overcome with a moderate amount of effort to get the shifter into park. Once the shifter is in Park it feels normal meaning you don't have to hold or force the shifter to stay in park.
It is frustrating because it seems most other people have a problem with the shfiter being hard to move from Park to Reverse or Neutral, but she is having the opposite issue. Will it hurt the car to keep shoving the shifter into park when necessary without getting it fixed?
View 3 Replies
I have a 2008 Chevy Impala. I've owned it for 14 months and put about 12,000 miles on it in that time. It's had basic servicing (rotations, oil, oil filter, cabin filter, etc. changes). It hasn't given me problems---but suddenly I have one and I'm not sure how major it is.
I made a drive from New York to Western Mass yesterday...couple hundred miles, but nothing huge. It drove fine all yesterday after I arrived...again, no problems. This morning, I went to start it...everything's okay. But then I went to shift it out of park...the button will not depress. I restarted a few times...no luck. I kept trying to depress the petal to shift it; I couldn't even shift it into neutral when not started. I am not sure what in the world is going on.
I've read numerous forums on this---it seems to be a common problem with these cars. What's not so clear is what to do with this. Responses range from---stick a screwdriver into some hole all the way to just go on and junk the car, it's useless. That's why I am coming here to get clearer guidance on resolving this problem, hopefully in an economical way.
View 10 Replies
I have a 2008 Impala that has been having interlock shift issues for about a week. The interlock shift button would not depress. I was able to remove the center console and take a look at some of the wiring. It there's a bundle of wires and there is a black wire that appears to be severed. From what I've read, this is a common problem with the Impala models from 2006 through 2008...it should have been a recall, but for some reason was not. How can I do a low-cost DIY repair on this that's going to be solid and prevent recurring problems?
View 3 Replies
My wife has a 2008 Chevy Impala with over 80,000 miles. When the weather is cold, the heater will blow cool air while in Park, even with the car warmed up. Then, once it is put in Drive, the heater begins to blow hot air again. Again, all of this time the engine temp gauge is in the middle position.
View 2 Replies
I have the above mentioned car with 50876 miles. I noticed that the steering wheel causes a click in the suspension when turned left or right whether stationary or with the brakes engaged. Also I noticed a thump felt through the steering wheel while doing the same action. What could be causing it, I checked my power steering pump and the fluid is brownish-red in color and no leaks are visible either on the ground or around the pump. I also got under the car and there seems to be no leaky CV boots ( i had to look these up to know what they look like).
View 5 Replies
How do you remove the shifter box from the center console for the 5 speed mk6? how do you drop it out of the car?
View 1 Replies
I have a 5-speed and my center shifter console is completely broken. I went to the junk yard and didn't find any manuals but plenty of autos. Is an auto console the same? It looks like the only difference is the boot/selector area.
View 2 Replies
Ive noticed while looking at online photos of the 2011 F150s, that on the FX4 and above trim levels, there are 2 sets of buttons on the center gear shifter. On mine, there is only one for tow/haul mode. I can make out in the pictures that its still there, but what is the other button?
View 10 Replies
When I turned the AC on, I get water leak inside. The water dripped from inside of the center console where shifter sits right above.
The water sift into the driver carpet area and front passenger area. If I don't take up the mat, the inside smell like mildew.
I took the car to the dealer and they said the drainer is clogged by the leaves and the water from the AC gets back up into the cabin.
View 7 Replies
while at stop in netural, reve engine, it seems to want to stall after it hits higher rpm?
View 1 Replies
Tow/Haul button fallen off of the console shifter? Not really happy that my Platinum has a falling headliner, buttons falling off, mirrors are barely swinging in and out anymore, leaking cab, etc. I know of the third brake light problems and expected the mirrors to quit but looking for information on the button falling off or the headliner.
View 4 Replies
The radio trim/bezels around the center console and down to the shifter tend to be noisy when its hot outside and the car driven over rough roads. How to insulate these radio bezels with felt or some kind of insulation so the noise is dampened? I think any rough road tends to make them creak and the hooks tend to rub against the plastic..
View 5 Replies
2008 Hyundai Accent 3 door the automatic transmission indicator light on the center console is not working anymore.
There is no mention of it in the Owners Manual. Every other bulb is referenced. Should I junk it or replace the bulb?
View 1 Replies
Completely stock, no swap. No motor noise when I click the buttons on forward, back, up or down. Nothing. Everything looks connected under the seat but not entirely sure. Fuse 1 and 44 are good on the side of the dash. This is for a 2003 Wagon with GLX interior and most upgrades from the factory. I need to move the seat in order to remove the center console/radio cage as it's blocking the armrest nut.
View 1 Replies
One of the brackets that connects the tray inside the center console is broken. I wanted to order the part but I only see the inside tray available to buy, not the brackets. I was wondering if I ordered the tray, will the brackets come with it? I don't want to order the tray and then it turns out no brackets, then I'll be stuck with an extra tray. The closest part number I see on Sewell is Part # 58801E.
View 2 Replies
As some of you may be aware, I swapped out my OEM HU recently for an aftermarket one -- I show it in post 486 here -- and for various reasons, I decided to go back to stock. I got a pair of 70-1761 & 71-1761 wiring harnesses (because I have a 4-channel aftermarket amplifier) and in a lapse of judgement I tapped the dimming wire into the illumination wire.
Later that night, I noticed when driving with my headlights or parking lights on, the center console buttons don't light up. Specifically, the radio, home & other buttons don't light up and all & the climate control dial knobs are very dim. The ventilation buttons buttons of the HVAC all light up fine & my hazard & passenger seat belt light up fine.
I already check the instrument cluster dash light control & I notice the dial knobs react to it but are still very dim. The brightness of the instrument cluster doesn't match their brightness at all.
I went ahead an looked at my fuse box under the steering wheel column and checked the 10 amp PANEL fuse & it's not blown. For good measure, I swapped it out but the buttons still don't light up. I then checked EVERY fuse under the steering wheel column & non are blown.
In addition to that, I checked every 10 amp fuse in the engine bay fuse box & non of them are blown.
View 4 Replies
Experienced problem with the Automatic locks on the doors? The doors on my camry lock as soon as I move the shifter out of park. The owners manual indicates that I can get the doors to lock automatically at 20 km/hr. I have tried following the instructions in the manual to make this happen but without any success.
View 14 Replies
2000 VR6 automatic. Yesterday my car was stuck in park couldn't move the shifter . Figured it was the brake sensor switch when the brake is engaged food pedal lights do not go out, I replaced it this morning but still won't work I've been driving it around in limp mode?
View 4 Replies
Theres a loud rattling noise coming from somewhere inside the center console, where the shift lever is, that's annoying as hell! Sounds like a metal ball bearing bouncing around against other metal pieces. I put my fingers down there and touched everything I could to try to stop the rattling but I couldn't. I did not remove the foam insulation.
View 4 Replies
Found out today the cup holder cover stuck open, button is stuck depressed so lid doesn't close, taken out this section before? I guess kids was having too much fun with it.
View 1 Replies
