Hyundai - Sonata :: 2003 - Grinding Noise While Turning Left


Apr 21, 2013

I drive a 2003 Hyundai Sonata. I currently have a slight grinding noise (or maybe more of a low growling) when I make left turns. This happened in the not-so-distant past and it was an issue with the power steering hoses (one had rusted through), so we (and by "we," I mean my fantastic father) changed it out. I thought this time it may just be low power steering fluid, but after checking it, I can say it's not low. I'd think if a hose was the culprit again, the fluid would be low. What we should look into?

View 1 Replies

Advertisement

Sonata I45 (LF 2015+) :: Brake Grinding Sound When Turning Wheel To Left

When I move the wheel to the left, I get this metal grinding sound (similar to rust on brake rotors/worn down brake pads). It happens when the foot is off the brake and ONLY when the wheel is turned to the left.

View 1 Replies

Golf/GTI VII :: Grinding Noise When Turning Left / Right - Cause?

I'm getting a weird grinding noise when turning left/right. Doesn't happen with normal turns, just at the sharp extremes. What might cause it?

View 16 Replies

Hyundai - Sonata :: Noise From Front Right Comes Out Sometimes When Turn Left

My 2010 Hyundai Sonata GLS makes a weird noise. When I turn left sometimes a noise from the front right comes out. It sounds like my tire is spinning on ice but there is no ice and my traction control does not come on...im really puzzled as I have never heard a noise like this before..

View 12 Replies

Yaris/Scion & Vitz :: Grinding Noise When Turning Left?

Yesterday I replaced what I thought was a bad front passenger wheel bearing, I removed the hub myself and took the hub to a local dealer to press out the old bearing and press in the new one.

Took the part back to the shop, got everything all assembled and took it out for a test drive. Right away I notice I still here the same noise, possibly even worse then before.

It was already late in the day so I decided to clean up and call it a day. During my trip home I notice everytime I turned the wheel to the left I here a horrible grinding noise, I did not have this sound before changing the wheel bearing.

Second guessing my own work, I took the car to the mechanic down the road today, not the same place that pressed the new bearing in. The mechanic inspected my work and couldn't find any problems at all. Even the ball joint I thought I had ruined was fine.

He inspected both from wheels for play, no play in either wheel. He then put the car up on the hoist while I remained in the car turning the wheel and accelerating. We were not able to reproduce the sound with the vehicle on the hoist, even with his stethoscope he could not here any noise coming from bearings on either front wheel. Everything sounds great with the car in the air, it's just when it's on the ground when there are problems.

Rotated all tire just to make sure it wasn't an oddly loud broken tire belt, once again no change.

I did replace the stabilizer link kit as well since the old one broke while during the wheel bearing replacement. Is there anyway I could have done something wrong with the stabilizer link that could cause this noise? I doubt this is the case since the mechanic did have a look at it.

I'm still assuming it's the front passenger wheel bearing, but don't wan't to go replacing parts I don't need. (I put a new fuel pump in my TJ 2 weeks ago only to discover all I really needed to repair was the broken wire going to the pump )

So just to be clear my car only makes this noise when it is on the ground, when the car is in the hoist I can turn the wheel and accelerate without any noise.

View 8 Replies

Santa FE SM (2001-06) :: Grinding Noise When Turning Wheel To The Left

I am hearing a grinding noise when I turn the wheel to the left.. and when I straighten it again the noise goes away.. no noise at all when turning the wheel to the right. what could it be? 2006 Hyundai Santa Fe / 205,000 km's

View 4 Replies

Hyundai - Sonata :: 2004 - Road Noise / Drifting Left?

OK so the car has been slightly drifting left for a while, at least a year, even after alignments. Last fall i had to replace the drivers side front axle just FYI. and then lately i have noticed what sounds like uneven wear, well i had my tires rotated and rebalanced last night the guy said the tires are "wearing beautifully" yet driving home i hear the distinct " hum hum hum hum" that speeds up and slows down respectfully, also i can "feel" it when driving on smooth roads. so now im thinking i need to take it back and have the axle checked out.

View 5 Replies

Hyundai - Sonata :: 2008 - Noise When Turning With Brakes Applied

I have 2008 Hyundai Sonata. I hear some noise from front wheels when i turn to right or left with breaks applied. There is no any noise when turning without break. the cv joint has been replaced but no any result. Still there is noise.

View 8 Replies

Lexus GS 2006-11 :: Grinding Or Metal Like Noise On Turning Wheel To Left Or Right

I have a problem! I have only had my 07 gs awd for less than 2 months. I noticed this morning when I turn my wheel all the way to the left or right it makes a grinding or like metal on metal noise. My brakes were done only a year ago, and this noise only happens when I'm turned all the way to the right or left.

View 11 Replies

Ford F-150 (2004-2008) :: 2005 - Grinding Noise When Turning Left

First I will start off by stating that my truck is a 2005 Ford F150 2WD Regular Cab 6.5 Bed, with the V6.

My problem is, when making a left turn at low speeds, I have a grinding noise that corrects itself upon straightening out the truck. This seems to happen on turns in the parking lots etc. It almost sounds like the tires are rubbing but the tires are the same BFG's that have been on the truck for 40,000 miles and have never rubbed. I am thinking it might be the power steering pump but am unsure. I do not have access to a lift right now but I have done the shake test on all of the suspension components and nothing seems out of place or loose.

View 14 Replies

Buick - Regal :: 2003 - Front Left Wheel Metal Grinding When Turning?

Car : 03 Buick Regal

Recent Repairs : Installed new brakes, rotors, and bearings a month ago

Problems/Symptoms:

1. When going forward grinding noise ONLY when turning wheel to the right, becomes a tad louder when applying brake.

2. When going reverse cannot turn at all without hearing an AWFUL grinding noise and the tire seizing up.

3. Front left rotor (where noise is coming from) is beginning to wear heavily on the upper-outside portion in a 2" band.

Possible Solution that I thought of:The metal brake pad clip is somehow bent/not installed right so it is grinding on the rotor.

Why Can't I Check Right Now : Do not have hydraulic jack currently to get my car up. Waiting until Friday.

Today, I took the car to the shop today and they actually found that my sway bar needs to be replaced, but unfortunately they did not open up the brakes to check out the grinding noise. So when I left, I got to thinking about the brake pad clip.

View 6 Replies

Hyundai - Elantra :: 2011 - Rumbling Noise Coming From Right Front Tire Area When Turning Fairly Sharp Left

2011 Hyundai Elantra, 42k miles. The car is my girlfriends which I drive once every few weeks. Yesterday I noticed a rumbling noise coming from the right front tire area. The noise only comes about when turning a fairly sharp left while above 20 mph. Taking a left onto a side street etc doesn't cause any noise, but taking one while going through a big intersection etc. Where the speed is up a little bit causes the noise. The tires are original, obviously not new, but they still have a decent amount of tread left on them, they're Continental Pro Contacts.

Tire, ball-joint, brake pad rubbings? I'm going to take it to get looked at tomorrow, I did spray the area with a hose in case there was something caught in there, but that didn't change anything. The tire looks fine, no abnormal wear or bulges, the car is in alignment and makes no other noise except in the circumstance noted.

View 2 Replies

Mitsubishi - Eclipse :: 2000 - Rear Left Wheel Free / Grinding Noise When Turning Right

I have a 2000 Mitsubishi Eclipse GT V6 FWD. about 138, xxx miles

My left rear tire/wheel has free - play (clicking movement) when grabbed at ONLY the 3 o'clock position and push/pulled back and forth (no free-play at 12-6 direction) in the air.

I had grinding noise from rear left side wheel when turning right couple weeks ago. After replacing wheel hub bearing assembly, the noise is gone. But still remains the movement ONLY at 3 o'clock. I replaced stabilizer bar links in both rear sides. This link doesn't look like the reason of free-play (clicking movement).

Also, I tested (push or pull) after switching the other side(right) wheel, it still had clicking movement at 3 pm. Therefore, it is not a wheel problem itself, I guess.

And I took off the wheel and fasten the lug nuts onto the rotor itself (so, without wheel in this case), then push/pull the rotor at 3 pm, but this time no movement in any directions. @@;; weird.. ONLY, I can feel the clicking movement at 3pm on the Wheel (or tire) even after rotating wheel, exactly in same spot (3 pm) movement~!!!! What's this case??

All 4 wheels aligned recently after got new tires.

I scrutinized inside wheel while pushing/pulling back and forth. But I cannot figure out which one is problem.

1. Knuckle.

2. Lower control arm ( or Rear rear control arm, not typo) which has a Ball joint and a cam bolt the other side.

3. Rear front control arm

4. trailing arm.

5. stabilizer bar link. (new)

6. Wheel hub bearing assembly (new, double-checked the nuts and torques)

7. Rotor and pads (new, if I push the rotor itself then no wobble or clicking at all directions as desribed above)

Where should I direct my attention and/or what component(s) should I look at given the indications above?

When I pull/push the wheel at 3 o'clock, it feels like wiggling the whole part of lower knuckle where is the connection part between the part of 4 bolt (backside) of hub assembly and lower side of knuckle.

I heard that 12 and 6 is usually an indication of ball joint, and play 9 and 3 is usually in indication of steering components ( tie rods , steering shaft or rack itself ), and all around play is an indication of wheel bearing (usually accompanied with a growling noise ).

View 5 Replies

Ford Super Duty (1999-2016) :: Rubbing / Grinding Noise When Turning Left Or Right

My dually has started to make a rubbing or grinding noise just about every time I make a turn, left or right. What this could be, truck has 8500 miles on it.

SD Dually

View 9 Replies

Hyundai - Sonata :: 2005 V6 - Creaking Noise From Left Front When Accelerating From A Dead Stop

This auto has 143,000 miles on it. I recenty noticed a creaking noise from the left front when accelerating from a dead stop. The shop I have used for 15 years said that the motor mounts are deteriorating and should be replaced. I trust the guy but would like to avoid the $1,400 repair. There are no symptoms other than the ocassional noise.

What is the downside of ignoring his recommendation? What other symptoms can I expect if I delay the repair? Can this be a serious safety issue? I plan to keep the car for another two years unless I bite the dust first or the engine falls out.

View 1 Replies

Sonata NF (2006-10) :: Loud Grinding Noise Coming From The Left Side

I just got the car back from repairs, there was a loud grinding noise coming from the left side of the engine. It turned out the whole rack and pinion setup was pouring out fluids and needed to be completely replaced also while it was in there they checked out an oil leak which ended up being the front valve cover and replaced a dead O2 sensor. The car has 99,300 miles

View 6 Replies

Ford Super Duty (1999-2016) :: 2000 - When Turning Hard Left Only Makes Grinding Noise?

First off my trucks a 2000 v10 f250 with four-wheel drive and 2 wheel abs with about 230000 miles on it.

I Recently replaced my unit bearing on my drivers side because I thought it was the cause of a grinding that only happens on hard left turns but I wasnt the cause it was going bad causing play in the half shaft. I didnt seem to notice and wear on the shaft from bad needle bearings but I have to take it all apart again to be sure. Was just wondering what else could be the cause of this noise. I plan to pull the axel shaft and change all the seals.

View 3 Replies

Sonata NF (2006-10) :: Rotational Grinding Noise When Accelerating Through Hard Left Or Right Turns

I have a 2007 Sonata 3.3 V6 GLS (CDN model) with 102k km (63K miles). Recently, I am noticing a rotational metal-like grinding noise from the front left wheel / engine area when engaging in hard right and left turns - usually a long looped highway on-ramp or sharp 90 degree turns. The interesting thing is this only happens when I am accelerating through the turns - when I left off the gas and cruise I don't hear it anymore.

On the side, I am also getting a single clunk noise when shifting from Park to Drive and vice versa from the same area (front left wheel) - not sure if this is related (i.e. if this is all related to a failing CV joint or wheel bearing).

View 2 Replies

Hyundai - Sonata :: 2003 - Continuous Pop Noise During Acceleration

2003 Hyundai Sonata, 70K.....engine makes a continuous pop...pop...pop noise during acceleration. So far have installed new crankshaft sensor, coil pack, plugs and wires.

View 3 Replies

Camry :: 2003 - Grinding Noise When Wheel Is Turned Even Slightly Left At Any Speed

My 2003 Camry makes a a grinding noise when the wheel is turned even slightly left. The noise is present at any speed, and is the same volume no matter what. I'm fairly certain its coming from the driver side front wheel. I changed that CV axle in January so hopefully that's not the issue.

View 2 Replies

Toyota - Matrix :: 2003 - Occasional Scraping / Grinding Almost A Windy Noise From Front Left

When on the highway, there is an occasional scraping/grinding almost a windy noise from the front left of the car. Happens most at high speeds when going over bumps. it's a Toyota matrix 2003 with 163k miles. We're on a car trip and are wondering if we need to address this now or if it can wait a few days.

View 2 Replies





Copyrights 2005-15 www.bigresource.org, All rights reserved