Hyundai - Azera :: 2013 - Running Rough / Inconsistent Performance And Sputtering Or Misfiring Until Warm
May 3, 2015
I have a 2013 Hyundai Azera with the 3L V6. I only use 93 octane gas (as recommended) and only use either Shell or Chevron. Each day, when I get in the car for the first time, I can count on it running rough and having inconsistent performance and some minor sputtering or misfiring (don't know the difference) until the car gets warm. Once it gets warm, all is well. It has 24k miles. Any thoughts on what may be the root cause? Should I change the fuel filter so soon? Does that matter being it gets better when it warms up?I change the oil religiously whenever the computer in the car tells me it is time to do so and use Mobil 1 synthetic.
View 3 Replies
Advertisement
I was a proud owner of this 2013 F150 3.7L, when i bought it brand new, but now after 30000 miles, or after last oil change the engine is making an inconsistent tick sound when warm. The sound can be somewhat compared to parts of exhaust cooling down because it blends in with that sound pretty well. The sound might have been present before the oil change however I have not noticed any sounds until after the oil change was done.
The sound is an inconsistent but repetitive tick, I mean tick-5second break-double tick-3second break-tick-10second break. Sound is present only when warm at around 500rpm and is harder to notice if engine is revved to like 2000rpm, but by increasing engine speed the sound is also more intense and faster. No mods done to the truck, not driven hard. I did put premium gas couple times.
There is no sound after starting the engine in a situation where the truck was sitting in a driveway overnight, even by the time i get to work (5km highway and 5km city) driving it moderately it does not always make the sound by the time i get to work. So now i suspect three things.
1. I have been idling my car a lot and sometimes used the cheapest gas from some no name gas stations.
2. When oil gets warm it gets thin and then it is somehow causing this sound.
3. There is just something wrong with the engine.
View 14 Replies
ok,up to yesterday, my wife's car started and ran fine. but we had not driven it in about 3weeks, and it was on empty. well, my kids would listen to the radio and, i think, starting it while we were at work. anyway, they ran it out of gas. so put gas in it, 3gallons, turned the key on and off a couple of times to get a good prime. started it up, died, i figured not enough fuel, yet tried again. started, but started spitting and sputtering and idling really ruff, had to hold to the floor to keep it running. removed the maf. it started and did the same. finally, i held down the gas and brake at the same time, took off to the store, got gas, but it died half way there. got it to the pump, put more gas thinking that's the problem. nope, the same. got it home, but when i let off the gas, it idles like it's not getting fuel and dies. so, any clue what it is? remember, 3 weeks ago it ran fine.
View 1 Replies
'86 Ranger, 2.3L, Automatic transmission.
Been having a sputtering/rough running situation once warmed up, replaced every so often with open loop smooth running. Lately, have had several occasions where the truck stalls and will not restart after a hard right turn (fuel pump powers up, tho) After 30 or so minutes of repose, truck will restart and run.
Recent History:
During the last 1-1/2 years, had cylinder head rebuilt and reinstalled. Had to run it all winter w/o EGR tube attached because of bad fitting at exhaust manifold. Replaced the fitting last spring and replaced cat back exhaust system. Had manifold hole plugged with pipe plug all winter. Have had a diagnosis of poor compression in the past, have not rechecked compression since head rebuild, but did have a noticable increase in power.
Have checked base ignition timing and it is correct. Valve timing appears to be as it should be. Have not had the opportunity to check for spark during one of the breakdowns, since I had no tools and it was night time.
The codes:
Early in Fall, got 14, 21, 24, 34. The 14 particularly interested me, as it suggests ignition problems.
Just before pulling the distributor, I checked codes again; 14 had disappeared as did 34 (EGR issues I resolved above) but I still got 21 (coolant temp out of range) and 41 (no HEGO switch) So I left the distributor alone and replace the HEGO sensor and cleared codes.
Last code check, just got 21(coolant temp sensor voltage out of range) and 24(air charge or Vane air temp voltage out of range) There is very little heat on cold days, full radiator and I've "burped" the cylinder head on an incline more than once chasing trapped air.
I'm suspicious of the TIF module, since the stalling is after warm up and self corrects. It was replaced once perhaps 12 years ago.
View 3 Replies
My 1999 lexus rx300 first threw a P1135 following a P0125, I tested the sensor and it was open at the heater circuit then then I was waiting the new part in the mail and during that time it kept running rough and then it threw a P0300, P0301, P0305, P0303. I was thinking that the PCM cannot monitor A/F ratio without the sensor so maybe the injector base pulse width was good enough. The misfire is are on bank 1, same as the bank 1 A/F sensor.
View 3 Replies
I bought my 2012 Camry, with 12,000 miles from the Dealership in December of 2013. The car was sold as CPO, car was purchased on Dec 30... just 6 weeks ago and I have had numerous issues with the car Misfiring. When I arrived at the dealer, the CHECK ENGINE and TIRE TRACTION lights are one and the car is running very rough as acknowledged by the service techs. For the 2nd time now, I am told they are not able to recreate the problem, so they are not able to fix it.
This is my 4th Toyota and I have NEVER had this many problems with a Toyota. Did I get a lemon? Service tech says he can't fix it unless he knows exactly what's wrong. I am asking him to check the spark plugs, check the ignition coil...and his response is that they can't just go on a wild goose chase, they need to know what they are looking for. Does this sound reasonable?
View 17 Replies
My ranger just started running very rough. Like misfiring, but I think it may be the fuel pump. It starts and drives...but it surges then drives normal, as if fuel is being fed, then starved, then force fed etc. My father asked if I had trouble starting it and to be honest in the last 6 months it was a little harder to start on several occasions. On a few occasions it required more cranking. But that was only a few times.
I tried putting in a fuel injector cleaner and 93 octane gas but it is still running even rougher now. I changed out the fuel filter under the rail about a year ago (maybe 8000 miles ago at most). My father thinks the fuel pump is shot and he laughed because his went on his expedition and he said it is inside the fuel tank and there is no way to get at it without dropping the tank. Is that true? 2002 ranger xl 4cyl
View 7 Replies
I have a 2000 ford explorer. 4x4 v6. One day i started it up and it was running rough. It had real sluggish power. Then the check engine light came on. I hooked it up to the code machine. The only readout was number 3 misfired. I replaced the plug and all was fine. A few months it happend again. I replaced it again and it was fine. Well it just happened again. I replaced it again. It ran good to work but on the way back no good. Light came on again. Hooked up the machine it read number 4 misfired and number 2 bank lean. So I replaced number 4. It still runs like shit rough idle and no power. Give it gas it dogs out but then it'll kick in if i get on it. Thinking it maybe a vaccum leak or intake leak or o-rings.
View 4 Replies
My '99 Olds Intrigue was running rough & short on power. Autozone read a trouble code "random misfiring" (PM3000 I think it was). As suggested, I changed the plugs/wires and checked resistance on all three coils with no luck. Here's the real spooky thing: while driving down the street a couple days ago, the pipe between the catalytic converter & muffler separated, scaring me and sending all the children getting off the school bus scrambling for cover. There was no noise or odor prior to the 'drop out' - is there any chance that the one problems (a catalytic malfunction, or small leak in the area for instance) could be related to the misfiring? A mechanic - before the pipe plummeted - had suggested it might be an injector problem or the intake manifold but I figured that an injector problem would trigger a code.
View 1 Replies
My 05 was running rough and misfiring quite frequently. After much deliberation, I took it in for a diagnostic hookup. The dealer said my driver side cat was clogged. Lucky for me, I was just under the warranty period(79673 miles). I have had it replaced and I can feel a noticeable difference in the way it runs. Could a clogged cat have made it run that poorly or am is it just in my head that it is running alot better?
View 7 Replies
So Friday before last my ex laid down on me while i was headed to work. So I parked it in a walmart parking lot and caught a ride to work with a friend then had it towed home that evening. Problem i was having is it started running really bad, miss firing, smoking, and sounding real rough, but I wasn't getting any trouble codes. So after both uvch's, icp, ipr, icp pigtail, checking fuel for water contamination and pulling my hair out, i decided to check the oil and found it to be 4 quarts low. Talk about feel like a knuckle head.... While it was down it did receive a new water pump, a diesel site 203* thermostat, new billet thermostat housing, Gooch's Radiator Flush Procedure, and some fresh rotella etc.
View 5 Replies
I have a 2008 MK4 2.0 with only 53,000kms. At 40,000Kms I put new OEM spark plugs.
Just recently, every morning when I start the engine is sputtering and rough running. The engines want to die but I give a little gas, and run rough like it is only firing on two or three cylinders.
When it gets to the normal operating coolant temperature it runs without any problem and I can use the AC. Its only give me this problem on the first start of the day.
Does not have any MIL light on the instrument panel. I scan it with VCDS-Lite and do not found any fault codes. The only thing that's come to my mind is to change the Green Coolant Sensor.
View 3 Replies
My '99 was running rough - coughing/spitting/sputtering when under a load - especially at lower idle/rpms and going up inclines.
Brought to mechanic and he put it on "the scope" which told him the #1 pack was bad. Replaced. Got it back and it ran better, but, then went back to the coughing/sputtering.
Replaced the spark plugs - OEM Motorcrafts. Seemed perfect for a wee bit, now I notice an occasional cough/spit but all in all not bad.
Curious: was it foolish to not replace ALL coil packs at time of plugs or is it ...acceptable to do just the plugs and then come back and do packs if needed.
View 5 Replies
Our Accent has just about 86k on it now, back in November it suddenly started running real jerky/rough, misfiring kinda thing. So I was able to drive it to my local repair shop and they found a bad coil pack on #3, so they replaced that and put in new plugs while they were doing it.
Just Saturday we were shopping about 20 miles from home and cranked it up to go home and started doing it again, pretty much identical symptoms, runs out normal at certain RPMs so I knew it was probably same thing...I was able to get it home and then took it in this morning and sure enough now #1 is shot. So they are replacing that. They want about 30$ more per coil then I can order them for myself online so I didn't want to scarf up the money for the other 2 that are still original.
View 29 Replies
Recently replaced plugs/wires on soon-to-be 10 year old '04 SF 3.5L (157K mi.) for the first time.
Plugs were OE Champion Platinum and all 6 looked identical except for excessive gap of .010 +/- due to all the miles. Replaced plugs with same as OE. Old plug wires looked good, but replaced them with aftermarket wires ( fit was as good as OE). Also replaced plenum gasket.
Problem is: engine runs rough at idle and high rpm and appears to be mis-firing. CEL is off and code reader shows no Trouble Codes stored.
View 19 Replies
My 2002 lincoln LS run rough after warm up. Check engine light code is EGR , replaced EGR.
View 2 Replies
So I have 95 1 liter 5 speed, it runs fine and smooth first thing, but once it gets warm it idles rough, poor mpg 33-37 and eats a lot of oil have to say a quart every 300 miles does not leak oil, does not smoke, need new muff and resonater.
Check engine light is not on. can i hook it up to hand held code reader .? 95 is it obd 2?
View 3 Replies
My 2002 Lincoln runs rough after warm up.
View 1 Replies
History: Truck was running okay but acted like a coil was bad when under load. I changed out all the plugs with Motorcraft and put on Summit racing COPs.
After the plug and cop change the truck will run rough after it is warmed up. I changed back to the old COPs and it runs the same.
First I replaced the MAF sensor after finding many posts on here about it. No change.
I read a bunch of posts on oil causing the problem so I used 10-30w and nothing changed.
I searched for a vacuum leak with carb cleaner and couldn't find one. I removed, cleaned and reinstalled the throttle body.
When I did the plug change I disconnected the PCM without disconnecting the battery. Would this cause this type of problem?
I think this is about all the stuff I found to try in the threads that came up through searching.
View 13 Replies
2001 hyundai Elantra 97000 mi. perfect on Thurs. Engine light flicker, sulfur smell, rough running, low power on Friday
First thought / hope, Bad gas? Had Filled up on Weds.... I added dry gas and FI Cleaner.
Second thought / fear Cat. Converter
Third . .. . ???
View 2 Replies
I have a 92 Celica ST 1.6L 5 speed with 175,000 miles on it. When should I consider getting the timing belt changed?
Also, several months ago the engine started acting up while I was on a long road trip, suddenly anytime I tried to accelerate the engine started sputtering / acting like is misfiring.. It got progressively worse during the trip, so I pulled over and to my surprise there was a significant amount of oil in one of the spark plug 'wells'. After soaking the oil up with a rag and cleaning the spark plug cable/connector the problem has only occurred one time since, and not nearly as much oil was present. It sound like I just need new spark plug cables.
View 6 Replies
