Honda - Cr-v :: 1999 - Front Driver Side Tire Rubbing Up Against Car When Turn Wheel From Left To Right
Feb 1, 2015
I took my car in the other day for 4 new tires at 8am I drive home 2 miles from the place. I work nights so I sleep all day. As I was going to work at 11pm I noticed it sounded like the front drivers side tire was rubbing up against the car when I turn the wheel from left to right. I took it back to the place I got the tires from. I thought something might be adjusted wrong or something. They call me to tell me that the tires are fine and the problem is that I need a new power steering pump. There was no noise or steering problem previous to me getting the tires.
I took it to pep boys (the only place open last night). They say the pump needs to be replaced along with racks and pinions..etc. I ask if the leak can be slowed or stopped with one of those stop leak products and they say no. The fluid just drains right out. Is there something the guy that put my tires on could have messed up to cause this problem?
I spent a lot for the tires and within 5-10 miles later this problem starts. The car has over 250000 miles on it and I cant justify spending that much money to repair it but at the same time Im in a bind financially (medical bills, divorce) to get another car right now. I realize even if they did mess it up when they put the tires on, they wont admit to it anyway.
View 13 Replies
Advertisement
I have 7mm spacers and when I take a hard turn, I get like an almost bouncing, rubbingish, thudding noise and feeling from my driver side wheel/tire area. I have FK coils. Do I need bigger front spacers? I have RC's btw, it gets worse as I go lower, and seems to go away if I really raise it up... how does everyone get away with this?
View 11 Replies
Have a problem When i make a slight turn to the left sounds like the tire is rubbing the inner fender. Don't do it all the time. The tire is not rubbing.
View 4 Replies
Installed eibach springs on the 7th gen camry? I installed mine this weekend, and I'm getting a like a rubbing sound when I turn the wheel from only the driver side. I removed the strut and spring combo to make sure everything was installed and aligned properly and it was. Just can't put my finger on why its only making that sound on the driver side.
View 9 Replies
When I slam on my brakes there is a grinding noise coming from the front driver side wheel and the smell of rubber. Also when I do a u-turn the same thing happens. I own a 1999 Honda accord v6....
View 1 Replies
So on my girlfriends 2000 echo I get the classic bad wheel bearing noise/vibration on the front left (driver side) wheel. Worsens under load (right turn) and goes away when unloaded (left turn). I've replaced left side bearing, CV axle, brake rotors/pads and the noise still persists. My next thought is maybe the ball joint but humming/vibration tells me something out of rotational balance. Bearing in the transmission? I don't know. I'm stuck.
View 5 Replies
I have developed a sounds that sounds like metal on metal. Not a grinding but more of a "swish swish swish" light metal rubbing when the truck has been running a mile or two. I can barely hear it over the radio but its very noticeable when the window is down. It is not affected by the pressing the brakes and it gets louder and faster in direct portion to speed. It will occasionally leave and start right back up. I touched the front rim around the hub and it was hotter than I wanted to hold onto. It didn't burn but it was hot. It was 105 degrees that day. Here is what I have done.
I replaced that front hub in 2010 and probably have 50K miles on it. I did the 3-9 test and there was no noticeable play. I spun the hub and while it seems to spin ok it does seem a little dry.... I will pull it tomorrow and see what it looks like.
I pulled the calipers off and the brakes pads are at half way and there is no burnt smell. I spun the rotor and it seemed flat and straight. I do have a small tiny lip all the way around them on both sides but I figured that's normal with 265K. I pulled the pins and they were dry but they didn't seem to be sticking. I cleaned them up with the boots and am going to replace them when I get some brake grease tomorrow. I have not looked real hard at the caliper but I plan on pressing that with a C-Clamp tomorrow to check it. Since the rotors and pads looked OK, I assumed there was not a stuck caliper although haven't ruled it out. The axle behind the hub seem to spin freely before I removed all this stuff and the hubs are not locked.
I think I covered it all .. I also thought it could be a rock or stick but nothing came out of my caliper or rotor when I took them off ..
View 14 Replies
I have a 2013 GS350 thats lowered on Tanabe Springs and 20s. It looks nice but the only problem i have is rubbing against the plastic (that what it sounds like) lining in the fender well. This only happens when I make a quick left turn or U turn. The tire size is 245/35/20.
View 5 Replies
Recently I lowered my .:R pretty low on fk highsports.. well today i was backing off into my driveway.. When i turned my wheels to the right or to the the left the front driver wheel makes loud noise like tick tick tick.. when i put my wheels straight no noise at all.. It happens when i go forward or backwards turning my wheels to the right or left..
View 13 Replies
Noticed a clicking noise when only turning left out of a parking lot today? What this could be? Sounds like it was coming from the driver side front wheel?
View 2 Replies
Noticed a squeaking like noise coming from their from front drivers side wheel when turning left? Seems to only do it right after driving my car after it has been sitting for a bit. Can't make it in to Hyundai until next week, and I'm a little worried.
View 10 Replies
2008 Honda Civic LX. The car has approximately 37,000 miles on it, most of which are highway miles. I live about 400 miles from home and thus, most of those miles have been accumulated from the 4 years of me driving back and forth to school during breaks, etc.
Recently, I've noticed a slight squeak from the front driver's side wheel. It's rhythmic with the rotation of the car and is only audible with the window down (you can't hear it when the window is up). It's most prevalent at really slow speeds, when the car is just rolling forward and then dissipates as I accelerate.
I just had it in for service about two months ago, the usual stuff: I had the oil changed and the tires rotated at the local Honda dealership. I still have the inspection paperwork they did on it and everything checks out. The brakes were shown to be just fine (7mm on the front two) and it's also not coming from the engine itself, thus ruling out the belt, etc.
To make things even more complicated the noise comes and goes. Last night I drove around trying to isolate it but found no consistency. It started right away as I drove away from my apartment, but then randomly went away only to reappear again, this time barely audible as I parked.
Other details: I park the car outside, and I live up in Northern Minnesota. It's gotten cold recently, and with the wind we get up here the dust really gets kicked up. The noise just started appearing last weekend as well.
I've done some preliminary research, and would hope that after 37,000 miles the car's front bearing isn't going bad. My game plan for today was to get it washed, in case there's some build up on the wheel, and then try and spray it with 4D-40.
View 1 Replies
Just put on new wheels 19x8.5 all around on 235/35/19s. Figured to have no issues, not super low or anything. Passenger side front tire is rubbing on the inside well pretty good. Not on fenders as far as I can tell, just the actual inside of the wheel well. Fender liner is already out on that side as well. Not a thing on drivers side though, and the liner is still in. Thinking maybe just need an alignment.
View 4 Replies
Before I take my 3 month old T2 in for service AGAIN this Saturday. The more informed I am when I walk up to the service counter, the better.
When I make a hard left turn (more than 90 degrees), I now hear a sound from the front left wheel area. It sounds sort of like the sound a plane makes when flying overhead. It's sort of like something is rubbing.
This started all of a sudden last Thursday. I thought it would go away. It doesn't sound normal and it doesn't happen when I turn right. It doesn't affect my steering. I don't recall hitting anything (note I sait recall).
Obviously, I got out of the truck and examined the entire area but I don't see anything unusual. I drove around in circles with my head out the window trying to figure this out.
View 6 Replies
Just got my 2013 RX 350 CPO and been driving it for 2 weeks without any problem. But today when I was trying to steer my wheel all the way to the left (car was parked) and I heard rubbing noise coming from wheel base. It only happens when making hard left steering not right.
I read online and seems like it's a common problem for wheel bearing for Lexus cars.
View 8 Replies
I have a 2005 Honda Civic that was making noise on the front passenger side wheel and what sounded like the front driver side strut clanging (bottoming out) when I hit a bump, sharp right turn heading down hill, or hit a pot hole (small or large). I brought it in to a mechanic to diagnose the issue. They told me I had a bad wheel bearing and also needed new struts. They quoted me a price on parts and labor that I thought was too high, so I checked a few other mechanics to make sure that I needed the work and try to get a better quote. All said the same work needed to be done, so I eventually had them repaired.
My car seems to ride better and I don't hear the noise from the front passenger side wheel anymore or the noise from the front driver side strut, however, there is now a clunking like sound coming from the front suspension (left and right sides). It sounds kind of like something might be loose. I can hear it over slight bumps, and when turning whether I'm going slow or even coming out of a parked spot.
Is there something else that may need repair after having all this other work done? Have I caused a "needed repair chain reaction" or something?
View 6 Replies
I have a 2000 Excursion 2wd. The left front wheel or something up front is making a rubbing sound when I turn to the right. Checked the brakes, they looked fine. Pulled front rotor off and replaced the wheel bearing just incase. Still making that same noise? I can't see any sign of something rubbing either on the frame, brakes lines, or control bars?
View 3 Replies
Honda Accord 2005 ... Just bought a new used car. All seems ok, but I have two problems.
(1) when not moving, i have slop in the steering and I can hear metal on metal contact when I turn the steering wheel. I pulled the tire and with basically no force I can move the rotor back and forth by hand. what it is and how to fix it?
(2) when braking, it appears that the front left pad sticks. Pads are not excessively worn down. Can't figure out how to get to the caliper pins ( thought they might be sticking).
Could the two be related?
View 2 Replies
I leased a 2010 Honda Civic (non-hybrid) in March of 2010. I had to replace the front brake pads at 8K miles, 18.5K miles and now again at 27K miles. Each time, I get a screeching, grinding noise from the driver-side front wheel. At 8K, I went to a dealership (not the one where I got the car) who replaced them for free "as a courtesy" (apparently, brake pads aren't covered under the warranty). At 18.5K, I went to the dealership where I leased the car from; they said that it didn't look like the other dealer had actually performed the work (yet somehow, the screeching noise went away). They charged me $250 to replace the brake pads and buff the rotors. Now, at 27K, the screeching noise has returned. The dealership has warrantied their prior work and isn't charging me. They claim that there is nothing wrong with the braking system. When I asked them why the pads keep going after 9K miles, they said they don't know, and maybe its the way I brake. I do 80+% highway driving and while I do encounter stop and go traffic on a daily basis, I don't think this is normal.
View 6 Replies
I've been having a lot of noise coming from the front left tire, and I finally had it diagnosed as a bad wheel bearing today.
I noticed that the front wheel bearings are sold individually while the rear wheel bearings are sold as hub assemblies. Is there a certain way that the front wheel bearings have to be removed and pressed on? I'm trying to see if this is a DIY repair.
View 14 Replies
What this might be? (see pic)....
View 14 Replies
