Honda - Accord :: 2004 - Right Front Disc Brake Started Making A Squeaking Noise
Jul 15, 2013
My right front disc brake started making a squeaking noise at about 50,000 miles when I applied the brakes. It was on and off at first but became more frequent. It wasn't a grinding noise and it wasn't the sensors for a low pad. I changed the pads and after about 2 weeks I started getting a grinding noise when I'd apply the brakes. I checked the pads and they were fine. After a few months I replaced the pads, grinding happened again after a few weeks of wear. Within the next few months I replaced the pads again, each time trying different types. Had the rotors turned recently and again, new pads. The grinding is gone but after a few weeks the brake makes a chirping sound now when applied. They work fine in stopping the car.
View 1 Replies
Advertisement
A mechanic recently replaced the pads of the front brakes. After the service, the break makes squeaking noise when I release the break pedal. According to the mechanic, it is normal, and I better ignore the noise. Is it true?
View 1 Replies
05 Camry, 2.4L, 47K. Replaced the front brake pads two months ago. I put in Akebono pads and did nothing with the rotors as the original pads were not completely worn out and there is no vibration whatsoever in the pedal.
The pads have recently started making noise on brake application. I'm getting ready to take them back apart and re-lube everything. Should I take some sandpaper to the pads & rotors to knock off any glazing? Do I hit it with a course or fine grit? I have not had this problem happen in the past and was thinking that maybe it is the quality of the pads but I believe these are oem...
View 1 Replies
I have a 2007 Honda Accord. A few weeks ago, it started making a whistling noise whenever I was in reverse, however, it would stop when I hit the brakes. Then I notices a very similar noise while driving, again if I break, it stop. Also, if I go over 45mph or so, it stops. Just yesterday I notices a grinding noise/feeling when braking but only when the brake all the way down. What this could be?
View 6 Replies
My car started making a loud, high pitched "whooping" and "whining" noise when making corners. The pitch is medium to high and variable. It kind of sounds like wet rubber on glass (like a squeegee). The first time it happened I thought it was a police siren, like when they sound the siren in short bursts "whoop! whoop!". But now the sound is more like a prolonged whine/groan. The sound might be coming from the steering column, but I can't be sure. Its definitely on the driver's side and in the front.
The sound is not related to braking. It doesn't happen on every turn. It can happen when starting from a stop or when already in motion. It happens on both flat ground and hills. At first it seemed to happen on cold days and only in the morning. I think this might have been a coincidence since now it happens throughout the day, every day.
My car is a 1993 honda accord with approximately 315,000 miles.
View 3 Replies
I hear a jingle metallic noise from my front right rim when I hit small fast bumps, but not big smooth bumps. I took off the wheel and was able to pull the disc outward. The caliper held the other end, but area opposite was able to move. I checked the left front side of car and it wouldn't move at all. From what I've read the disc seems to slide off the front axle hub so maybe that is normal. Not sure why left won't move but right easily slides out. If I took off caliper it would come right off. It should be tight enough when the wheel is mounted I assume.
View 6 Replies
Front discs and pads replaced about 10k ago and still under warranty - work done by my mechanic whom I have been patronizing for the last 8 years. When the brakes are applied at 40 MPH plus, get a low pitched "HMMMMMMMM" type of sound that goes away as the car decelerates through 40. It is sort of annoying but the brakes work perfectly fine. A mechanic that works for the shop rode with me and listened, and didn't offer much of an explanation or offer to remove the wheels and inspect the brakes. In other words, he cited this as normal. Would it be advisable to get a 2nd opinion? I've never had this issue with brakes on other vehicles I've owned, especially with new brakes.
View 10 Replies
I have a 2002 Honda Accord coupe with 130K miles on it. A few days ago the AC started to make a loud roaring noise when it is turned on full blast. As you turn it down the noise gets quieter and when the fan is on low the roaring noise stops. Other than making this sound it is running fine and there are no other issues/noises coming from the car. What is causing this noise?
View 3 Replies
I have an 04 Accord EXV6 with 237K miles. I have recently replaced shock absorber assemblies and all 6 motor mounts / transmission mounts, which resolved most of the loud "clunking" noises. However, I now have more of a "rattle" sound which I hear when one of three things happens...First, when the engine is started (typically when the engine is cold). Secondly, when shifting between park, reverse, and drive (also, more common when engine is cold). Lastly, when driving over rough roads or potholes at slow speed. The sound is the same in each of the 3 conditions, and appears to be coming from the right side. It doesn't seem to me that any bushings, control arms. etc. would be the cause since the same sound is heard during startup or gear shifting while the car is sitting still.
View 16 Replies
The A/C on my 2004 Accord has started blowing warm air out of the 2 driver side vents, but still blows cold air out of the 2 passenger side vents. It also occasionally blows condensation out of the 2 cold passenger vents. When this same thing happened last summer, the condenser and compressor were replaced within 3 weeks of each other. It is less than a year later and the same problem is occurring. Even more odd; every once in a while the 2 driver side vents will blow cold for just a few minutes, then revert to blowing warm air. The car does not have dual climate controls.
View 1 Replies
I have a 2006 Honda Odyssey. I got the timing belt replaced two weeks ago.Last week the engine started making a quiet clicking noise upon acceleration. The clicking noise happens intermittently not continuously. Then last night the yellow engine light came on. Questions: What does the yellow engine light mean? Is the engine light related to the timing belt work that was done? Would the clicking noise be connected to the timing belt work?
View 3 Replies
Sounds like worn out brake pads but it is way before they are supposed to get worn out. Took it to dealer they said brakes still have a lot left on them, but it still squeaks like crazy every time I stop. Taking it to dealer again. I am thinking something is defective, pads or rotors, as I just heard another new Santa fe have the exact same squeaking as they were driving along. My car is at 30k km.
View 6 Replies
I have a 1997 F150 (truck in signature). In December my passenger side parking brake cable broke so I replaced both rear cables (front cable appears in good condition).
This past Friday the passenger side brake started making a grinding noise so I pulled the drum to find the self adjuster cable broken and the ratchet jammed between the shoe and the drum. I pulled everything apart and put new shoes (the pin the ratchet pivots on was broken off the rear shoe)and all new adjusting hardware (adjuster screw, ratchet, cable, and cable guide). The rest of the hardware looks in good condition (still paint on the springs and retainers). I got everything put together and took it for a test drive, it had a nice firm brake pedal (it's been a while since this truck has had a firm pedal) and great stopping power.
Took it to work today, and on the way back I stopped to pickup a package from the UPS store. I set the parking brake and put the truck in 1st like I always do. When I got back out to the truck to drive home, I released the parking brake but there was still obvious drag as I drove home (no good place to stop during rush hour), got out of the truck and it reeks of burning brakes. I pulled the driver side drum off (after it cooled), which was rather difficult, and everything looks to be in order except the rear shoe was not touching the post at the top of the backing plate. I checked and the adjuster was still all the way in, so that isn't the issue.
I pulled the parking brake cable out to slack the drum side of it (with the pedal released there is some spring tension from the pedal mechanism) and clamped it with vice grips so the cable was slacked and the shoes were then touching the post, and the drum could be installed and turned relatively easily, I then removed the vice grips and let the spring pull the tension out of the cable and the brake held firmly (requiring considerable effort to turn the drum). Is there anyway to adjust the spring tension on the parking brake cable when the parking brake is released?
Additional notes: when setting the parking brake, the pedal will only go down an inch or 2 before the brakes are locked up tight and the pedal won't move, it used to go down several inches before. also I noticed that the feral on the end of the drivers side cable (that locks into the lever attached to the rear shoe) is deformed, like the cable has too much tension on it. The cables are the correct ones for my wheel base according to Autozone but I'm starting to wonder if they are too short. Spring tension on the parking brake cable (when the brake is not set) causes the parking brake to drag. How do I get the parking brake to stop dragging? ("star" adjusters are new and adjusted all the way in).
View 7 Replies
About 2 days ago I started hearing a noise coming from my front right wheel well. It's a light thumping noise that seems to occur when I go over rough parts of the road. What could this be? I was planning a trip for this weekend and i need to drive about 500 miles. Can my car make it?
View 7 Replies
I have just purchased an 06 long bed f-150 with high mileage on it. I am going thru it slowly as time permits. I had found the passenger door stop, not the hinges, to be making a "quite" squeaking noise as it is started toward a closed position. A simple drop or two of oil I am thinking, but it then really increases in sound. I then clean it off and apply a synthetic grease, still loud, maybe louder. I finally got it back to a "quite" squeak again by cleaning it. Use lubricant, or should I just leave it cleaned as it is now?
View 1 Replies
I have a 2007 Honda CRV with about 85k miles. Always had a lot of road noise, but recently my husband and dad road with me and were very concerned about a "womp, womp" noise in the tires. It matches the revolution of the tires, so when I get going fast I don't hear it. I had new tires put on, rotated front to back, and balanced. My husband thinks it's worse. Also had new front brakes (steering wheel shook when I braked at high speeds). I'm at a loss and have spent quite a bit already. Could this be wheel bearings? Tie rod ends? It sounds like the tires but it's definitely not.
View 19 Replies
I own a 2005 Honda Accord LX with just over 44,000 miles. Recently I've been hearing an intermittent noise coming from the front of the car.
It started a few weeks ago when I cranked the wheel hard to the right to get out of a street parking spot. After I did this, it sounded like something was dragging on the ground (like the muffler). After I turned left at an intersection, the "dragging" noise went away, but I could still hear a faint sound similar to metal pieces being rubbed together. It does not sound like the brakes are grinding, but like a piece of metal is being rubbed against another piece. The noise goes away when the car comes to a stop.
These two sounds come and go, and usually after I have made a turn. The rubbing noise comes and goes, and I hear that more than the dragging noise. What might be causing this? Is this a major issue? Should I take this to a mechanic or the Honda dealership?
View 4 Replies
I have a 1996 Honda Accord (automatic) with just over 149,000 miles. In the 5 years since I've owned it it's required little more than some new spark plugs and tune up. I currently drive about 30 miles a week, but starting tomorrow I'll be driving much, much more to a new job. Living in Chicago with awful potholes, salt, and traffic, I'm concerned about what may happen in the near future...
I've been getting a grinding noise on the front driver side for years and have never fixed it and never noticed a change...I know it's the tie rod ends/ball joints. I've been warned that the wheel could come off, and as much as I believe them and don't want this to happen, nothing has ever happened. Is this something to do since there has been no change in symptoms or car performance in a couple years?
Other than that, any tips for keeping the car in good, working order? I do oil changes, but are they really necessary every 3000 miles? I have to make it last as long as possible and actually love the car anyway!
View 9 Replies
My right front tire has been making a noise like 2 pieces of metal are touching. Not quite a grinding but maybe more like a squealing. It starts slowly at low speeds and then faster at high speeds. If I brake the sound goes away, but then slowly starts coming back. What this might be?
View 5 Replies
Have a 2003 Honda Accord with 178K miles on it. Excellent service and maintenance on the car. After this winter (midwest) I notice a creaking sound (like bedsprings) coming from the front end, passenger side. Car also seems rather bouncy on rough roads. Husband check the shocks and struts and says they are fine. What else could it be? Sway bar, ball joints, etc. and estimated cost - will take to a mechanic...
View 2 Replies
My wife's car has a grinding type noise (like a key being burnished on a grinding wheel, but lower in pitch). We've had our regular mechanic check the braking system and he finds no irregularities and also says that he didn't see any loose items underneath the engine area. The sound wasn't one of the ones on your excellent 'noises' list, however. The noise comes from the driver side at the front of the car. The car is 2002 Honda Accord LX with 135,000 miles on it. The transmission was replaced under warranty at 70,000 miles.
View 4 Replies
