I have a 1999 Honda Accord. It consumes oil but is not leaking, the compression is good, and there is no sign of burning. What could it be? Might sludge result in the problem?
View 19 RepliesI bought this car off the showroom floor with about 1,200 miles on it. Since just past 70,000 miles or so, this car has been using more and more oil between changes. It now appears to be up to about 1 quart per thousand miles, maybe just 800 miles. I don't see any sign of a leak. There now are 201,000 miles on this engine. The V-tech solenoid had to be replaced about 30,000 miles back. Timing chain has never been replaced; nothing else major has been repaired. Last new PCV valve was put in about 30,000 miles back. It didn't seem to slow down oil consumption. This oil problem is the only problem with this car, except for the V-tec before, and some rattles. Otherwise it is as reliable as any car I've ever owned, and I've been around a while.
I've read many blogs and other web pages on this, and it's a common problem with this particular Honda engine. Is there any chance that this oil usage is something besides worn piston rings? Some people seem to think it might be worn valve seals, and/or worn camshaft seals? how expensive is that to get fixed? If it's any of these things, is there really any practical solution other than a new engine, or maybe a rebuilt?
Short of thousands of $ in repair costs, would a different type of oil reduce oil consumption? I read some people saying to stay away from synthetic (why would that matter?); some talk about oil treatments; one honda service manager says he puts good old STP in a high mileage, Honda, he owns. I tried that with this car, just one application, and I didn't notice any drop in consumption, but I drive a LOT, in all types of conditions, so I don't know that I gave it a real chance to work. In such an old engine, if I experiment with these, is there any chance of doing further damage to the engine? For that matter, would switching to 5W-30 or maybe a 10-weight, possibly slow down this excessive oil usage? I really don't want to buy a new car.
I have a 1992 Honda Accord with 270,000 on the odometer. Recently, I noticed little oil drops on the driveway floor where the front of the car is parked. What does this mean? The car consumes about a quart of oil every 2k to3k miles. Cause for concern?
View 9 RepliesI have a 1999 toyota corolla I just bought it for my daughter for her first car the only thing I've noticed is that it only had 1000 miles on it since I changed the oil and that it was 3 quarts low? Not sure what happened but I checked it again after her second 1000 miles and it was again 3 quarts low. The car does not leak oil and does not smoke
View 2 RepliesAlrighty let me see if I can get everything. 01 6speed 450hp at rear wheels. Comp 910 valve springs, valve seals, 238-80% injectors, full RR, 38r turbo, napa air filter, Hydra with Gearhead tunes, 5"exhaust, 280k about 100k on rebuild. All mods done 40k ago. Now I have a horrible up pipe leak I assume is causing the low boost #'s I have to do another clutch so up pipes will be fixed when tranny is out this week. But I'm using 1-2 gallons of oil every 3k or so. I smell burning oil when I get out, mainly if I am getting on it then stop. I haven't pulled the fuel filter to see if its a injector o ring. (Tonight's project) but turbo sounds fine, I'm going check for shaft play tonight. What could be my loss of oil without it actually leaking on the ground?
View 14 RepliesI have a 1991 Accord that won't turn on the high beams. I can pull the dimmer switch and it clicks and the dash indicator comes on for the high beams but it just keeps the low beams on. I am guessing the dimmer relay isn't working properly but am not sure how to test it. Also where would I buy one? I have checked a couple sites and even a search doesn't bring it up.
View 2 RepliesMy 1992 Honda Accord failed the emission test today for a too high NOX reading. The applicable standard is 2.50 and my car's reading was 2.61. I've read that high NOX has something to do with a malfunctioning EGR valve. Will replacing the EGR valve guarantee that I pass the emissions test? I don't want to start throwing money at all kinds of parts.
View 4 RepliesI recently had an oil change at a new shop. While I was there, they said I needed to get a power steering and brake fluid flush and recommended a fuel induction service. I have a 2003 Honda Accord with about 107,000 miles on it. The car runs fine, I have no problems. Occasionally, when I hit the brakes, there is a high pitched squeak.
I've been doing research and getting mixed results on if these services are necessary. What could be the cause of the brake noise?
I have a 99 Accord, automatic trans with over 197,000 miles, appropriately maintained.
What is the most likely cause of a very high pitched whine that comes up when throttle is being added? Here are some facts: -This is not a constant, or even a daily occurrence. Very randomized. I think I first noticed it over a year and a half ago (20,000 miles).-The sound will continue if the transmission is put in neutral and the RPM maintained (usually 2,000 - 2,500).-If the A/C is on when the sound happens, it will go away when I turn the A/C off.-When the sound is happening, there are no adverse symptoms to go with it. The car runs and drives quite well. Well, this issue is just that inconsistent.
So, I just found out that the noise my car has been making is related to the power steering. The mechanic said I need to replace the pump, two belts and the high pressure line. The car is a 1993 Honda Accord LX. I can't afford to have the mechanic fix it, so I'm going to have to do it myself. My questions are:1) how long should it take me? I'm not experienced at all. I was thinking of just doing the high pressure line as a 'warm up' to start. Is half a day wishful thinking? Any tips?
2) The mechanic said the hose is leaking all over the belts. He said it was "squirting and pouring out". I tried to duplicate the squirting by turning the wheel all the way and revving the engine. What I saw was a very small leak at the joint. So small it wasn't falling, but I'm sure it would if I waited long enough. The belts appeared dry to me, but I'm not really sure what they are supposed to look like. The mechanic said that they are getting soaked in fluid and that I might throw a belt. Anyway, so my question is how can I tell if the belts are "soaked in" steering fluid.
3) I've been told that if the belts are getting steering fluid on them they might be responsible for the loud squealing noise when turning. If I clean the belts with degreaser, and the noise stops, does this mean that replacing the leaking hose would be sufficient?
I'm making a long road trip in about a week (ca to wa). I'd prefer to deal with the replacement when I get to wa, but I also don't want to make things worse.
I have a 2004 Honda Accord EX (4 cyl) with 102k miles. I bought it brand new and kept it completely in shape with regular service. For the past few months I start getting front end vibration at braking, mostly when slowing from high speeds and without any repair this vibration has now became common at all speed.... my diagnosis - I need to replace to turn disk/rotors....
While I have not remedy the rotor issue yet, I started getting this new vibration at 60 to 80 mph.... Below and above this range of speed i have no vibrations - the car will drive fine. This type of vibration in my experience for front wheel drives is mostly due to balancing or bad tires. so i took the easy way ..... and as i already needed tires well i dished out the dough and replaced all four with Michelin Primacy hoping that it will resolve the speed related vibration.... Well it did not?
I continue to drive as-is without addressing the real problem - coz I'm not sure what is causing the vibration.... now new additional vibration started on acceleration; any time I hit the gas pedal (normal acceleration or kick-down) I get vibration very similar to when a stick shift's gearbox required replacement/repair of the worn out pressure plate's (fingers/springs gets bent or weak) or the thrust bearing needs replacements/repair/grease packing. I'm from the old school stickshift transmission, my knowledge in automatic is very little - I have repaired Acura's automatic transmission before but I don't think repairing once will make me an expert in automatic.
So to summarize my issues or current state:
Issue# 1 front end vibration on braking
Issue# 2 front end vibration 60 to 80 mph speed only
Issue# 3 front end vibration on acceleration at all speed
The list above is in sequential order as I have experienced.
I have a 1998 Honda Accord with about 170k miles on it. Lately, I've noticed that the temperature gauge creeps up to about 3/4 of the way to max when I'm driving in heavy traffic and running the air conditioner. This is the only time it goes past the midpoint, and it usually starts going up after maybe 15-20mn of sitting in traffic. If I turn the A/C off, the temperature immediately starts going back down to normal. Also, when traffic is flowing at normal speeds, I can have the a/c on for hours with no issues. The air conditioning itself is also pretty ineffective in heavy traffic situations. It gets very cold when I'm moving at a decent speed, but is pretty weak at low speeds. I just had the radiator replaced about six months ago, and it doesn't seem to be a coolant issue. What the issue could be?
View 11 RepliesI just had my 2003 Honda Accord Ex in the shop. I was without my car for a week. I broke down on the highway and had to have it towed, not once but twice. I took it to a reputable Honda/Acura repair shop. It turns out the ECU was corroded and the A/C drain was plugged up. I was not aware of the design of the Honda in this area, however, with the A/C unit being above the ECU in makes it easy to destroy the ECU if there is any problem with the A/C. Seems to me that Honda might have wanted to recall this to put plastic between the 2 to prevent the corrosion of the ECU or something, however, no such luck. The mechanic pointed out that the carpet on the passenger side was damp and to check it. Who would a thunk?
I got the car back yesterday. After running the diagnostic equipment they had to replace the ECU and ignition responders, put plastic between it and the A/C unit, replace the spark plugs (apparently the wrong ones were installed), and #4 coil, have the keys reprogrammed, replace the A/C filter and clean the A/C drain. Now here is the rub..I got it back and drove down the block. There was a high pitched whine or whistle sound that occurred when I accelerated. And the same sound when I took my foot off the petal as it was slowing down.
I immediately drove back to the shop and the mechanic and I took a drive. He had heard it also before I got it back. He mentioned it might be the transmission and that if it needs replacing. The car has 170,000 miles on it and it the past 2 months I have had new tires. He suggested I drive it over the long weekend (Labor Day) then make an appt to bring it in next week to have the transmission checked. So here is my concern, if it is the transmission will I do more damage by driving it? Will it get worse quickly and break down thereby leaving me stranded again? What is the best thing to do?
I bought a 2002 accord with 105800 miles 3 weeks ago. I got the timing belt and water pump replaced within a week of that. I have noticed that the car makes a high pitch noise upon accelerating after replacing the belt. It does not happen always, but sometimes. I have noticed it on 3 days in last 2 weeks. A preliminary web search tells me that it could be a tight timing belt.
View 3 RepliesThe dealer recently replaced the front and side motor supports. Since then I've noticed that the car idles high when first cranked and I smelled excessive exhaust fumes. One time it idled really high and would not idle down when I hit the gas. Then it started idling up and down when my foot was not on the gas. Could there be any connection between this and the motor support installation? Could linkage to the gas pedal have been bent during installation? 2002 6 cylinder Honda Accord EX.....
View 3 Replies08 Accord. After replacing the starter and cleaning the throttle body I keep having a CEL and the P0507 code.
Checked for leaks around intake, vacuum lines, etc. found none.
Tried the relearn procedure and still no luck. Car idea higher than normal ( just over 1000 rpms warm). Also feels like it wants to pull even when stopped.
So I figure I have either:-damaged the throttle body somehow cleaning it- Have incorrectly implemented the re learn procedure- missed a vacuum leak ( possible but doubtful)- or something else I don't know about
99 Accord, 160,000, automatic, 4cyl vtec, properly maintained.
Recently the CEL came on following an episode of the engine running poorly. It painted EGR code P0401 which is being dealt with, and, P1739: "third clutch pressure switch circuit fault." I investigated briefly in my Haynes and found that P1739 is one of the codes that will not trip the CEL.
I have not had any major issues with this transaxle. The fluid is at its proper level, Honda Z1 brand, and in good shape. I have it changed every 20,000 miles. Sometimes if I am driving along in 2nd gear, right around the upper speed limit before it would shift to third (20-25 mph), the car will jerk just a little but it is driveable. Could this be related?
Should I let this slide until something happens or should I get the to a transmission tech? What would you do? Could the thing go into limp mode one day without warning?
My gen3 has 200k miles and eats atleast 1 to 2 quarts every 2 to 3k miles what can I use...
View 12 Replies6 Months ago, when entering a carwash, the engine on my 1999 Honda Accord stopped immediately as the underbody spray hit the car. I rolled it back, tried a few times, and it started and ran as though nothing happened. Earlier this week, during a rain storm, I drove through a puddle and again, the engine immediately stopped and I coasted to a stop.
Both times electrical components in the car continued to work (wipers, lights, windows), but I tried to jump it just in case to no avail.I had it towed to a repair shop where they said that all the harnesses were wet, so they dried it out and was able to get it to run again. But they couldn't tell where the water was coming from. There is also an issue with the center panel fuse (radio and power outlet); it shorts out whenever replaced with a new fuse (not sure if this is related to the main issue...).
I called a Honda Dealership repair center to see if this was something they had heard of before with this model/year, and it was new to them. They also said not to bring it to them since their diagnostics wouldn't discover anything if it was running.
The car is running fine now, but I'm always going to expect it to stop unexpectedly.
My 1999 Accord V6 with 180k miles has started overheating. The fans will not run unless the A/C is on. I replaced the coolant temp switch A, because the fan came on when I jumpered the pins of the fan connector. The fan will not come on, even when the temp gauge goes all the way to the top. Jumper the pins or turn on the climate control, the fans kick on, and the temp drops. Tested the old temp switch in boiling water and it tested fine. Tried spreading the pins on the temp sensor in case the connection was just bad and that did nothing.
Otherwise, the system seems to work fine. Top coolant hose gets hot first, then bottom gets hot after 10 minutes. The heat works, and I didn't see any signs of exterior leaks. What else might keep the cooling fans from coming on?
I am the original owner of a 1999 Honda Accord (automatic transmission) which now has 184,000 miles on it. I just replaced all the tires last year, had to put in a new battery this year, also had to replace the a/c hoses earlier in July.Very recently I had had some problems with the car shifting and when the check engine light came on I took it into the dealership who says it needs a new transmission. They want $4200 to fix it.I have had all the servicing done including oil and filter changes at this dealership which is in Houston, TX.I really like this car, and its the fourth Honda we have owned; three of which were purchased with this same dealer.
View 12 Replies