The brake lights on my envoy are not working. The third light is working. I replaced the brake switch and the bulbs and the lights still don't work. My hazard lights are working. What I should try next?
View 6 RepliesI have replaced the brake light switch two times - still nothing going on with the brake lights. The turn signals and taillights work fine (replaced all the bulbs anyway). For what it's worth, what made me start this repair was that the third light was coming on, but not the brake lights.
That is when I went to the dealer and bought a new brake light switch. After installing that, the third light didn't work...so, I downgraded what I had to begin with, it seems. Thought maybe I had done something to break it when I installed it, which is why I bought another one. As far as I'm concerned, I followed the installation instructions meticulously, yet still nothing.
I have also pulled all the fuses in the access panel by driver's door and inspected them.
I noticed that my break lights are not working. Checked the fuses . The break light on the cab works fine. The blinkers and emergency flasher work great. i checked the bulbs and nothing wrong there. Truck runs and drives great. But no break lights.
View 7 RepliesI have a 1997 Ford F250. My trailer lights will work, but I have no brake lights or turn lights. I have checked all my fuses and all the fuses are good.
I was told it was probably my trailer tow relay, so I bought it at O'Reilly's, but I don't know which relay it is exactly.
I just want to know which relay number it is so I can replace it. And, if this doesn't sound right, is there something else I should be trying?
I have a '97 F150 and the trailer break lights and turn lights are not working. I have checked the fuses under the dash and hood and all fuses look fine. I have also tested the trailer on another vehicle and checked the wires. Trailer lights worked and wires and connections looked fine. In searching the forum I noticed a similar problem [URL] .... and it was fixed through a third fuse box that was not in the manual. I haven't been a user long enough to send e-mails, but it looks like WhipsnHorses was the one that provided the answer before.
View 12 RepliesI have a1994 Dodge 1500 Ram Hemi extra cab 4door. The brake lights on the bed of the truck not the high light will blink on and off and sometimes stay on the other day my son-in-law narrowed the truck and a trailer and the trailer also blinked but again not the high light. Also the cruise has stopped working about the same time this started. At one time it was infrequent now is most of the time. Wondering if it could be part of the alarm system or something else it is driving me crazy.
View 4 RepliesA couple times recently, I've been unable to shift my truck out of Park & the brake lights don't work.
After checking the related fuses & finding them to be ok, it all works again.
What might be causing this to happen?
Brake lights do not work. The turn signals work, the flashers work, and the running lights (head lights) work. I checked the bulbs and both filaments light up during the above processes.
I removed the brake switch at the pedal. When I was removing it, I heard some clicking under the dash. I connected the 2 pins with a wire (bypassing the switch), and got a spark a few times along with the clicking sound like a relay,and the brake lights would come on, but now nothing. No sparks, no clicking. The flashers and turn signals and running lights still work.
There are no blown fuses in the fuse box to the left of the steering column. Is there a relay somewhere under the dash just for the brake lights?
I'm on my way out and someone on the road just told me that my brake lights are both out. My rear running lights do work. Is this a fuse problem? What is the number where this fuse is located?
View 1 RepliesNissan Pathfinder SE-V6 4x4 My blinkers quit working, but flashers still come on. All 3 brake lights also went out but tail lights still work. when the car is cranked and blinker is on there is a buzzing (alert) sound and the oil temp light comes up on the dash, there is no sound when the key is in the on position, only when it is cranked. Occasionally there is a crackle through the speakers that usually goes away when I turn it off. I don't know if the last part is relevant but I figured I would put it in anyway. Is this an easy fix or are there serious electrical problems?
View 1 RepliesTurn signals quit working on my 2006 E-150. Swapped out the relay under the dash and it did nothing. Also noticed the brake lights aren't working. The headlights and taillight a are working. I pulled the fuses under dash for the lights and they tested ok. I did notice the flasher relay was making clicking sounds intermittently even when not touching anything.
View 3 RepliesI have an electrical problem with the rear brake lights on my 03 Camry. The fuse keeps blowing the instant I step on the brake. I replace it and it blows immediately. So now i can't drive it because I have no brake lights. I'm thinking there is a short somewhere, where to start my troubleshooting?
View 4 RepliesI have a 2003 santa fe and the blinkers are not functioning but the hazard lights are working fine. I checked the fuse and that is fine. Is there someway I can take apart the handle assembly where the switch for the blinkers are? Also, sometimes they would work and other times they wouldn't so that seems like a loose connection somewhere. The indicators for the blinkers on the dash do not work either so there has to be a problem giving power to the switch.
View 8 Repliesbrake lights not working and just the left light is working when i turn the lights on
View 1 RepliesI've got a 2001 f150 supercrew 4x4 with the 4.6. I plugged in trailer lights and now I have no brake, turn signal, or hazard lights. I've checked fuses and none are blown.
View 8 RepliesI have a 99 Passat Brake lights are not working, but center strip is. Replaced bulbs & fuse Could it be switch? Is center strip on a different circuit? Check engine light came on recently and then went out.
View 30 RepliesThe brake lights on my 08 Elantra aren't working, but the window light is. The bulbs are fine, although I did replace them anyways, the brake light switch isn't the problem and it isn't the fuse. Any other reason why the brake lights don't work?
My hazards and all other lights work - it is only the brake lights that aren't.
The brake lights on my truck are not working all the fuses are good, the bulbs are good, I have changed the brake switch. They still do not work, altho all the other lights at the rear work even tail lights.
View 19 RepliesThe car is a 2004 Oldsmobile Alero. At some point a little ways back, the cruise control stopped working. Checking the brake lights, I discovered that the brake lights were also out (all 3 - two on the side and the one on top). I checked the fuses and they looked fine, and I even swapped a spare 20A fuse to the stop lamp spot just in case. To no avail there, I replaced the brake light switch. This also did not fix the issue. Anything else I can/should check?
View 10 RepliesBoth brake lights not working. Center brake light works. Cruise control and shifting out of park OK. Fuse in brake circuit OK. Brake light switch is OK: I opened it up and the contacts are OK. Continuity is OK. Bulbs OK. Tail lights and reverse lights OK.
Car was rear-ended by a Durango at the bumper and boot lid about 2 years ago, but there don't seem to be any wires in the effected area. Battery changed 2 months ago: no problems with re-boot.
So I'm thinking short in brake circuit, but the center brake light works, and the fuse is OK. Is there a brake light relay? Inspection due.
My ESP warning light has been on for the past few days. Just noticed that 2 brake lights aren't working (but the centre brake light is OK). A common problem? Is is just a matter of replacing the brake light globes?
View 1 Replies