G20 - Infiniti :: 1995 - Check Engine Light Comes On
Mar 13, 2012
My friend just bought (one week ago) a 1995 Infiniti G20T with 130,000 miles. The car is in great condition, except for the flecking/peeling gold paint (common problem with gold or silver paints?). When he bought it the car had a couple minor issues and had the "check engine" light on. After researching a bit, we figured that the possible issues causing the check engine light couldn't be too severe, given the car's asking price. So, he buys the car and I look up how to check the "check engine" light codes. I manage to get at the ECU and record (with the blinking red light) two codes: #34 and #105 - knock sensor and EGR + canister and control soleloid.
Good news, I told him. Both of those are relatively cheap to fix. So, I close up the ECU access and ask to borrow the car to run a couple errands. So, I go to one store, shop, get back in the car, make another stop at a store, get back in the car, make a third stop at a store and as I'm parking the car appears to start to loose power - engine seems about to stall and lights fade a bit. I rev the engine and it's fine. I (stupidly) go into the store and return to the car which now won't start. Turning the key to the crank position produces "click click click" and nothing else. Radio and lights work, but I turn off all these in case it's a low battery. Again - click click click.
View 12 Replies
Advertisement
So my check engine light came on a while ago and the code indicated my second oxygen sensor. I replaced it and the light went out...for a while. Now it comes on for a while and then goes out. Not sure what to think.
View 1 Replies
My 95 Dodge neon had no problems it ran, started, drove fine everyday! Check engine light turns on after few drives... Now after about 10 drives the car does not start. It makes a rapid clicking noise.... Called auto shop they say battery, I bought this battery one year ago from them. They suggest i try a jump start. I go to jump start, look down check engine light is FLASHING.... Since car wont start, needs a tow for a car I'm not even driving nor will drive and not worth my money to invest anymore.....
View 3 Replies
Just bought this wagon with 80000 miles. AC just stop working, fans and all. At the same time check engine light came on. Is it worth fixing or will I be facing thousands of dollars for furture repairs for this year car?
View 14 Replies
I have a '95 'vette LT1 that I bought new for my 50th birthday. I only drive it about 4-500 (yes - hundred) miles a year and for the most part it sits in the garage, gets washed and waxed, and put away. 51000 original miles, the first 40000 put on in the first 1 1/2 years. I've had an ignition and fuel injection problem since I bought it. Get's fixed then some new ignition/injection problem comes back. Here's what it does now: car starts fine, runs about 30 seconds with no problem, then starts to miss, runs very rough and very rich (can smell it in the exhaust). After about 3 minutes, the engine smooths out and 2 seconds later, the "check engine" light comes on and the cooling fan starts to run. It runs fine for about 5 minutes, then "check engine" light goes out, fan stops, starts to run rough, misses, gas mileage (per the dash display) goes to about 5 mpg, runs rich, etc. Then the cycle starts again with the "check engine" light and fan coming on and the car running fine. I have no clue.
View 6 Replies
1995 Cadillac DeVille 4.9 L Check engine soon light comes on, battery voltage high. When I increase speed the head lamps get brighter when I decrease speed the head lamps get dimmer. I changed the alternator because that's what a mechanic said I needed but I still have the problen battery voltage high. Will this damage the battery or other components? Should I stop driving the car.
View 5 Replies
Recently the check engine light has started coming on every time I drive on the highway. At approximately the 5th mile of my ride, the light comes on but I cannot detect any symptoms, the car runs great. This rarely if ever happens when driving in the city, only on the interstate. My car is too old to be hooked up to the fancy diagnostic machine. What I should check to resolve this problem? 1995 Honda Odyssey with 279,000+.....
View 11 Replies
1995 G20 5.7L... This van runs great when first started and continues to run fine after it's warmed up and will do so until it’s turned off and restarted. When first started vacuum at idle is steady at 21” and 10” at 55mph cruising speed. I can continue driving for an hour or so and it will continue to run fine. It's only when I shut it down and restart after 20 minutes or so that I have a rough running condition. After parking for 10 to 20 minutes and restarting idle is still steady at 21” vacuum but the van hesitates on acceleration and runs rough at cruise with a 5” vacuum. If I continue to drive I get low vacuum trouble codes for the MAP and Oxygen sensors. I’ve replaced the oxygen sensor and performed a diagnostic on the MAP sensor which checks out ok. I’ve checked for vacuum leaks – none found. I've replaced the spark plugs, cap and rotor. What to look at next?
View 8 Replies
I've got a 2000 Infiniti Qx4 that I can NOT get to pass inspection. I replaced the engine at 130,000 miles, and since then I've had nothing but problems. I live in TN and I've got to pass emissions testing. The car drives/runs great, no problems. I'm down to code P1105 or something, MAP/solenoid valve... Or maybe it was P10107 or something. Anyways it means the MAF sensor is malfunctioning or I've got bad hoses or electrical connections near the intake. So I replace the MAF. Nope, check engine light still on. I replace the clips on the hoses for the MAF. Nope, still on. I check all the wires n all the hoses. Nope, light still on. Now my mechanic is going on about I might have a bad computer or it might not have accepted the new engine as it was from a different year (still a 3.3L V6 standard of the prior to 2001 model)? My mechanic has been at it for over 2 weeks trying all kinds of stuff but to no avail.
View 4 Replies
2002 Infinity QX4: Why the Service Engine Light appeared 2 days after 3 emission sensors were replaced?
View 6 Replies
I have a 1995 suburban k1500 4x4 i just pulled a check engine code 35 what could be causing it to appear? I need to know if its something small or a big fix?
View 2 Replies
I was driving home and all of a sudden my rpms are at 3.5 4k rpm wont shift to next gear. I put in in tiptronic mode and shift it to 8 it works fine. Then about 10 minutes later check vsc shows on dash traction control light is on check engine light is on and the light next to the check engine i think it is the abs light. I havent pulled the code yet.
View 1 Replies
Just had my lexus dealership do the ELF recall. While it was in there I had them check to see why my check vsc light comes on randomly which sets off the check engine light.
They came back and told me that my water pump is leaking, what are the future problems of a leaking water pump?
They said the check vsc light is coming on, in their words is "found center y pipe, gaskets leaking at front pipe, may still need to replace converter pipe." So what does that mean and what do I need to do?
View 14 Replies
A few days ago my "Check VSC" warning came on along with the check engine and traction lights being on. I left my car in a parking garage for a week when I was on vacation and the lights came on once I started the car after getting back from my trip.
I have had the "Check VSC" warning before and I fixed it by replacing my gas cap. My gas cap seems fine this time around so I got my codes scanned and the only one that came up was P0300. Having this issue with the 2007 Lexus GS 350? I still feel like it's my gas cap because I bought a cheap replacement last time around.
View 8 Replies
My Lexus was working fine till yesterday, but today when I started (button press) it, it started giving me a Check VSC error and Check engine light along with Slip Indicator started showing up
Took it to Autozone for the codes and got
P0015
P0304
C1201
B2799
View 7 Replies
I have a 2003 Infiniti g35 with about 140,000 miles on it. Its been having a strange problem recently and intermittently. Sometimes when I first get in the car and I put the key in and try to start it NOTHING happens. I mean nothing. Not sound, no lights anything. If I slam the door and try the key again the dash lights may flick on for a second but then nothing. I'll open the hood for a bit and slam it and try starting it again and it will usually start again fine. It also seems to happen more when its hot outside or the car has been sitting in the sun. Other things notable about this problem is that MOST of the time, things like the radio presets are unaffected. That is, when the car does start it's not like it was a cable from the battery or anything since the radio was still getting power.
Another, possibly related problem, is if the car is running and I park, but have not turned the ignition off yet because I'm listening to the radio (those driveway moments) and reach up like I'm ready to turn the car off and just ever so slightly grip the key, the radio will die and the engine will keep going. These things lead me to believe that it all has something to do with the actual ignition switch where the key goes in. Of course when I drop it off at the mechanic it does not get reproduced and he thought it was the starter until I reiterated the fact that NOTHING happens when the key turns. It can't be the starter since when you turn the key there is no power to anything. This has been going on for over a month but I finally got fed up when I couldn't get it started after stopping at the 7-11 on the way to work. I took it right into the shop but the mechanics opinion is "if I can't get it to act up, I can't diagnose the problem" which seems kinda lame to me, but what can I do.
View 3 Replies
my 1995 buick lasbre cuts on fine and drive ok but when i start it as soon as i turn and drive itcuts off but after it cuts right back on and drive ok
View 3 Replies
Anytime it rains my car has difficulty starting yet once it starts it runs rough for a while until it warms up and then runs fine. During one of these episodes the service engine soon light came on so I took it to a auto parts store that allows me to use a computer to read the codes. It indicated that there was a cyclinder misfire. I had the fuel filter replaced last summer and I also just recently cleaned the EGR valve however it has been 4 years since I had a tune-up. Why does this happen and What should I replace first? Spark plugs? Wires? Cap and rotor? Clogged fuel injector? Bad O2 sensor(s)?
View 3 Replies
My 1995 buick lasabre cuts on fine and drive ok but when i start it and barley drive or turn it cuts off but after it cuts right back on and drive...
View 1 Replies
I have a 2004 G35 that has not given me many mechanical problems. However, before my last oil change, I noticed noise from my engine which I wasnt used to. After 2 days I checked the dipstick and there was almost no oil on it which greatly worried me. I put in two 10W30 bottles and got a normal oil change the next day. Its been a week now and I still hear this noise when I start my car and its idling (cant hear it while driving cuz of the normal engine/road noise). It almost sounds like a noise I would hear from my dad old 70s diesel benz's, just not as loud.
Its def mechanical but I can't figure out what it is or where exactly its coming from. Its been 10 days now since the noise first started and it doesn't seem to be going away. I just checked engine oil levels now and they are near max. When I open up the hood, I don't hear the noise ( over the normal engine/belt noise), but its very apparent once inside the car with the doors closed and windows up. I am worried my car might end up and die on me all of a sudden while on the freeway or if my transmission is going to go bad.
View 5 Replies
Last year, I had the unfortunate experience of having to get my engine replaced on a 2003 Infiniti G35 (only 121k miles, I got it used in '06, long story, I assume previous owner didn't take very good care of it). I opted to have a local mechanic find a used engine instead of paying for a rebuilt one and he was able to find one that had ~60k miles on it so I went with it. Now it's 9 months later and I have started noticing a burning oil smell while sitting in the car at a stop. I took it into a shop (not the one that replaced the engine, different tire and lube shop) and they found that the rear main seal was leaking pretty badly and that's where the smell was coming from. They don't do that kind of work so I need to take it somewhere else to get any repair done.
I feel like, if a second diagnosis also says RMS is the problem, that the shop that put in the engine should have given me a new RMS when they put in the used engine. Is it not something that would be visible and thus easily replaced when installing the new engine? If they did in fact replace it, it wouldn't possibly have failed on its own after only 8 or 9k miles, would it? I don't normally hearing about RMS problems until cars are well over 100k miles.
View 13 Replies
