Ford - Ranger :: 2000 - Transmission Shifts Hard From Stop To Go
Jul 11, 2012
2000 Ranger autimatic, 2.5 lt 2wd, 155,000 miles. To my knowledge it has never had a tranny flush or the fluid changed. I have noticed last week that when you are taking off from a stop sign it jerks going into gear. This only happens when you are taking off all the other shifts are smooth. The transmission fluid color is redish-brown and doesn't have a burnt odor. I don't know where to start. Do I get a tranny flush, change the fluid or is it something else?
View 5 Replies
Advertisement
I got this 89 ranger xlt with a 2.9 and automatic transmission. I mainly bought it because it was in such good shape and I was planning on putting a 5.0 in it. everything works on it. the a/c, radio, lights and it runs real nice. the only problem it has is it shifts pretty hard going into second gear. every once in a while it will shift smoothly into second but only like once or twice a day. he said he had recently changed the trans filter and fluid and the fluid does not smell burnt.
View 7 Replies
I have a 2000 Ford Ranger 4X4 XLT with a 5R55E automatic transmission.
Coming out of a stop the truck jolts at about 20 mph as it shifts from 2nd to 3rd gear. It feels like it revs too high in 2nd gear, up to about 2400 rpm, and then shifts hard into third. It feels like the truck gets a gentle hit from behind.
Earlier in the week, the O/D light flashed. I took it immediately to an independent tranny shop who pulled the code for me: P7033, incorrect ratio in 3rd gear.
They cleared the code for me. In limited city and highway driving (less than 15 miles each trip) the O/D light has not flashed again. But the problem remains. I plan to take it back to the shop later next week.
What might cause this so that I might have a more informed conversation with the tranny mechanic?
View 3 Replies
2000 Ranger XLT 4x4 3.0L Auto
So a couple months ago I had a transmission problem. It shifts high and hard all times and after the "od" light gets going (after it gets warm), the transmission slips (like riding clutch) when starting from a stop. If I went from drive to 1st gear with the selector and back, it cleared the slipping problem for a bit. I did an oil/filter change and about 50 miles later the truck is running fine, no issues. One day I hopped in it to go to work and it was like nothing ever happened. Fast forward 1,500 miles later. I start to notice the transmission is subtly shifting weird, like a small jerk when shifting. It gets worse over 50 miles and now I am back to the above problem. Is there a way this could be a sensor or solenoid problem? I never heard of a transmission correcting an issue then starting at it again so much later.
I don't like fixing or working on an issue unless I am at least 95% sure what the problem is. I also don't have $2k to plop down on a repair at the moment. Would it be worth it to take this to a dealership and see what trouble codes I am getting? I would try a transmission shop but it's not guaranteed they will have the test equipment to check a ford transmission. Also a friend said that AutoZone and other stores can't check transmission codes. So what's the best option here?
View 14 Replies
2000 Ranger 4R44e transmission.Hard shift from 2-3 gear and when i run about 35-40 mph and brake then acelerate it downshifts hard . Whats wrong with it?
View 14 Replies
I just rebuilt my E4OD transmission in my 1996 F250 7.3L it has all new clutch packs torque converter and a shift kit. When I first put itback together it would not shift out of second cleaned mlps and shifts threw all the gears now. I took it out on the road to test it and this thing ran great shifted smooth and quick could not askfor any better but when Trans temp gets around 140-150deg it shifts hard and od light flashes. I have ordered a scanner to read the codes but won’t be in till later this week. What I could check in the meantime.
View 13 Replies
Have an 01 f150 super crew 4x4 with 5.4 li shifts hard from 1st to 2nd - What could be the problem?
View 1 Replies
I have 1993 F-350, 4X4, four door with a 460 fuelie and a 4EOD. That"s a bunch of 4's! I bought this pickup with 186,000 miles on it in 2005 or so, really just to haul fire wood and go to the dump once every 6 months. I don't know if the the tranny has ever been rebuilt. Nothing else on the pickup has been rebuilt. It now has 196,000 miles on it. In the past the tranny always shifted like a stock 4EOD. Kind of slides into the first three gears then into overdrive pretty solid. I took it out to go to the dump last week and it was just like always until it took it to taco party last night and it started to shift real abrupty. Doesn't matter how fast you go, it hits just as hard if you are on the gas or just casually cruising. It is hard in every gear. My first thought was that it may be low on fluid. When it is hot, idling in park after a drive I don't see oil in the little holes on the dip stick. I see oil on the dip stick but not in the little holes. Am I correct in thinking I should see oil in the holes? Actually I will see oil in the little holes when I first pull it out, then if i wipe it, put it back in, I see no oil in the holes. Engine idling in park of course.
View 2 Replies
I have a 2000 Buick Century that only has 70000 miles on it. I have an issue that when I drive the car for a while, the transmission will shift hard after stopping at a light or stop sign. It only does it through the first three gears. If I shut the car off and let it sit for a few minutes and start it back up, it shifts fine through all of the gears. I have not had the change to change the fluid and filter yet. The fluid looks clean and is always full. I have read that there has been a common problem with a pressure control solenoid in the transmission needing replaced to correct the hard shifting. I am not getting any kind of error codes from the PCM, so I am not sure.
View 4 Replies
2007 escape 4wd 3.0. I've notice some random hard shifts for the past month and today the trans has trouble shifting out of 1st. If I get the rpms between 3,000-4,000 and ease off the accelerator pedal it shifts into 2nd without drama. It will not shift at lower rpms with the same easing off the pedal. The trans light is steadily blinking.
View 7 Replies
So while driving to work I start experiencing some weird behavior with the transmission. It would shift hard and seem like it wasn't pulling hard at all. I looked down and saw the overdrive off light flashing. Got to work, turned the car off then started back up and the light was off. Any thoughts?
View 14 Replies
I have a 95 f350 with a 460 motor and a e4od trans with 90,000 miles. My speedometer,odometer quit working and then transmission shifts hard in all gears. I've checked the fuses and all are good. I've even replaced the speed sensor but still have the same problems and don't know were to look next. Where or what to check?
View 1 Replies
I have a 1995 Ford Taurus when I press on the brake to come to a complete stop the transmission slips from second gear to first gear. But when I press on the gas and go from 1st to 2nd gear its a hard shift but no slipping. I checked the transmission fluid it was low and dark so I replenished the fluid and put in this slip and seal stuff in the transmission. What else can I do and how long do you think I will be able to drive my car until it dies completely?
View 3 Replies
My 1997 F250 Heavy duty shifts very hard and sometimes feel like it slips out of gear (i press the gas pedal to the floor and speedometer rises very slow and truck doesn't move like it should.
View 14 Replies
My tranny started acting up so I took it to a reputable transmission shop for repair.
Symptoms : Shifts very hard 1st to 2nd. Light flashes on overdrive button.
The following is what has been done at the transmission shop.
Computer failed to read codes. Sent out to rebuild. After rebuild, codes read FIPL needs replace. Done and gives good readout. Trans control replaced, speed sensor replaced, checked all associated wiring and plugs as well as ground. Dropped pan, changed fluid and filter. No parts in pan. Tech says pan and fluid looked good. Replaced coil pack.
After all that, this is what is happening..Clear all codes. FIPL reading good. No flashing light on shifter. It feels like it is shifting from 1st to 3rd, then back to 2nd. Still shifting hard and indicator light starts blinking again. He is going to read computer again. At this point, he suspects a mechanical problem in transmission but is reluctant to remove and tear down.
View 7 Replies
I have an 2003 F-150 4.6L with a 4R70W transmission, the speedometer goes crazy while I drive, the truck feels like it kicks in & out of overdrive, it shifts hard, the o/d light flashes while driving and I cannot use speed control. I have already checked the transmission fluid, changed the speed sensor, & the range sensor. After changing the range sensor the truck ran perfect for 3 days then the same problems.
View 5 Replies
I have a 2011 F250 with the 6.2 34000 miles and my Transmission shifts hard between 2-3 and 4-5 took it to the Ford dealer and they said it is the shift solenoids are bad but it is cause from the Powertrain Control Module and its not covered by the warranty because it is part of the emission system.
View 4 Replies
I currently have a 2006 F-250 6.0 with 187,XXX.
My problem that i am having is that the transmission recently within a couple weeks started acting weird about the same time 3 of my fuel injectors started failing. When i start up the truck and put it into drive it takes about 3-5 seconds to shift. Once it's in drive it runs pretty well but it will start shifting out of normal when i go to accelerate. Also when i go to slow down sometime the transmission shifts hard to a lower gear. I also have a video of the sound that it had started to make since its hard to describe.
Here are attached videos and photos. I want to hopefully fix the problems myself so i can learn more about my truck. I am going to handle the fuel injectors here soon since 2 are failing and ones about to these have been causing the truck to shudder at around 47-53 mph but after that its fine.
The transmission is stocked and never been altered, i do admit for 3-4 years I have changed the fluids or filters.
The truck is bullet proofed, sct tuner, upgraded turbo from stock, 4" exhaust, head studs and new everything when the engine was rebuilt and bulletproofed.
I plan on going to ford tmw to have them figure out the problem and hopefully its just solenoids so i can fix it myself. I have a link posted also where you can hear the noise it has been making when in R P and when shifting going down the road and it is a automatic.
YouTube.....
View 14 Replies
I have a 1994 F-250 XLT heavy duty model. No warning lights are on. A few times a month my transmission will start shifting hard, kicking into the next gear. The odd thing is, if I reset the computer it stops. Shifts smooth as butter. The fluid is a vibrant red and the fluid looks great like it's new. What is going on? I'm getting tired of having this happen. The truck has 108,500 miles on it.
View 10 Replies
My 98 honda v6 accord shifts hard sometimes when going into and out of low gears. The transmission guy told me it had to do with the material that was on the clutches wearing off, dislodging, and clogging things. I have been driving the car for several years as is. Should I have the tranny rebuild or keep driving? Am I making matters worse by driving it as is?
View 6 Replies
I'm sure this has been brought up before. Whats the rattle you hear when accelerating hard when the transmission shifts? Exhaust note, exhaust hardware, dsg transmission, engine sound?
View 8 Replies
