My 2000 Ford Ranger 4x4 truck's anti-lock braking system is not working properly. When I slow down for a stop my anti-lock brakes kick in every time for about 1 or 2 seconds. What can I do to stop this from happening.
View 2 RepliesI recently had my wheel hub and bearing replaced. The mechanic said I might hear a little noise with the brakes but they'd work. Turns out that noise is the Anti-lock braking system engaging every time I use the brakes. It happens when the car speed gets low, maybe 5-15 mph. Also, if I'm driving slow in a parking lot or something, and let off the gas, that change in speed sets the ABS system on too, without my foot being on the brake pedal.
I've also noticed sometimes when the weather is very cold, the ABS light will go on and the ABS brakes won't work; just regular brakes. Is this something that I'd be able to solve at home? Could I possibly bleed the brake lines to check for any air ( although braking seems fine ) , busted fuse for the system, anything else to check before asking the mechanic?
I have a '99 E350 van that I am feeling a light anti-lock brake pulse in the pedal when I am rolling to a slow stop under light braking. Braking doesn't seem to be affected, but it doesn't feel right. I tried locking up the brakes and didn't feel any anti-lock pulse...seems backwards.
View 1 RepliesMy Excursion recently had all of the door lock actuators replaced, but locking still wouldn't function correctly...everything works fine with both the fob and the door keypad, but when using the door switches it would only lock, not unlock.
I searched for three days trying to find where the door relays were because I knew my actuators were all good....I happened upon a thread on here where a user had my same issue and was asking about relays. Like me he was trying to find out where the relays were, but users kept wanting to tell him to do the foil quick fix on his actuators. Even after he specifically said he was sure it was NOT the actuators, posters kept telling him to focus on the actuators, that there were no relays other than internal to the VSM I think...he finally took it to the stealership and they told him they had replaced one of the power lock relays under the dashboard.
I searched the internet for a couple more days trying to find where those elusive relays were, and all I could find was a generic "under the dash" if even that much--most people kept wanting to point users to the actuators. So for any future readers who want to know where the door lock relays on a 2000 Excursion are located, there are three of them--one for "all doors lock", one for "all doors unlock", and one for "driver's door lock". They are buried in the dashboard, mounted to the firewall upside down behind the radio. The easiest access to them is from the floorboard to the right of the accelerator pedal.
You'll need to remove the knee panel under the steering wheel that covers the fuse box; then remove the rubbery lower wiring cover below it that's held in place by 3 or 4 pf the phillips head push-pins; then in the lower right of the opening where you removed the knee panel (look just above the accelerator pedal), find and remove the single gold 7mm screw that holds the driver's footwell air diverter in place, and remove the air diverter. Then lay on your back in the drivers floorboard and look up to where would be directly behind and just below the radio--you'll see a small (2"x6") rectangular black cover facing down that hides the relays, held on with a clip at each end. Pop the cover off, and you'll see the three relays. I'm not sure what order they are in. In my case, I was intending to make sure the relay was my problem by having what was functioning change when I swapped relays....apparently my problem was a poor connection on one of the relays because everything started working perfectly and has worked fine since.
Last year I literally replaced the entire A/C system in my 93 F150. (The compressor, the hoses and the evaporator were leaking and I toyed with converting it to 134A so I went ahead and replaced the condenser and all the rest of the parts. I ended up putting R12 back in it since I have a tank.)
I replaced everything, added oil, pulled a vacuum, leak tested it, and charged it back with 2.75 lbs of R12. The A/C worked then (and now) but it was not really cold. I got busy and did not have time to trouble shoot it until this weekend and the pressures and clutch cycle times were withing spec according to the repair manual - air was in the low 90's so the clutch was on constantly, low side pressure in the low 40s and high side in the 180s. The inside center vent air temperature never got below 60 after about a half hour of running on max. It eventually gets the inside temperature cool but not very quickly and certainly not enough to make me take it off high.
I thought maybe the blend door was not closing so I took the glove box apart and can hear the blend door slamming in both the full cold and full hot positions so unless the door has a hole in it or there is some other path around the heater core, I don't think this is the problem. I also double checked the orifice tube and I had used the blue one that again the repair manual calls for. What could be keeping the A/C from working???
I have a 2009 Prius base model, and I've been having two different brake problems.
View 8 RepliesBeen having an issue lately with the AC system on my 2010 4.6L F150. The AC system is not working properly and is only blowing air the same temp as outside. In other words, if its 60 degrees in the morning the AC will blow cool, but later in the day its blowing warm. Pushes air no problem, but living in Florida, it's mainly warm air. Compressor clutch is kicking on and off fairly rapidly when on max AC setting (5-10 seconds on, then 5-10 seconds off). Hooked up gauge to low pressure side and the readings were 60psi WITH compressor on, then fell to 30psi when the compressor turns off. Where to start? Haven't done too many AC fixes before. Potentially a bad compressor? Overcharged lines?
View 7 RepliesI brought a 99 Passat V6 with 46k miles and the car is now having problems with the driverside power door lock. I hit the remote to unlock the car but the door wont open. After several attempt, im able to open the door.
View 4 RepliesI have an 03 Ford Ranger 4x4. Great truck and runs great just with one small problem. For whatever reason, every single time, the a/c only blows un-cool air (not hot) when I start the truck. Then, and only then, after about 30-40 mins of constant driving around does the a/c start working properly and blowing COLD air. After that it works great but it always takes about 30 mins after I start the truck for it to work correctly.
View 4 RepliesI have had my T-Reg for 2 weeks now, and absolutely love it! However, there are some strange things I have found with the Nav System that are just a bit annoying.
1) Not all cities are on the CD. This is obvious - they can't put *all* the cities on, but there has been more than one occassion where the city I needed was not in there. For instance, I tried to find "Centerville, VA" but the Nav System only knew "Clifton, VA" (I guess they are the same), which ultimately became "Fairfax, VA." I didn't realize it was "Clifton" until I arrived there (following a map) and saw a sign.
2) There are two sections of major roads that I travel (Rte. 95 and Rte. 66) where the Nav system stops giving me directions to my destination. It tracks my position on the map as I am driving, so I know I have a fix on at least 3 satellites, but when I press the "i" button for my next cue, it says something like "Routing to your destination is not available from this location." The blue line on the display that shows where I should be going also is missing. Once I exit either of these major roads (in the areas that this occurs) the Nav System resumes guidance.
3) The map display on the Nav System is always "behind" by 10 or 15 seconds. When I cross a roadway, the map doesn't indicate my crossing until a good 10 or 15 seconds later, depending on my speed. The turn-by-turn display and voice prompts are *dead on*, it is just the map that isn't.
I'm having some problems with the power windows and locks. The passenger side window only works when it wants to. The power lock on the same door will not lock unless I push it down. And the lights that are on the switches don't work.
View 4 RepliesI have a 2004 bought in 2003. It recently logged its first 100k miles. My problem with it is not easy to describe. It is actually running more like a non-hybrid car. I can feel and tell the hybrid system is operational, and I can hear the electric motor whine when coasting, down, etc. However, I don't think it is running as it should or as it used to. It happened on highway while cruising about 70 mph. I hit the accelerator to pass someone, and I felt that something changed. I'll try to describe it: think of a half-clogged pipe. The water can barely gets past the obstruction. You keep applying pressure, and suddenly the clog dissolves under pressure, and water begins to flow freely, and the pressure goes down. So it felt like that. Now the accelerator pedal is lighter, car is faster to respond, yet I think something is wrong because the car isn't itself anymore.
I don't like problems like these because they are very difficult to diagnose, let alone fix. For a while I also have not heard the inverter pump whine after shutting the car off as I did in the past, but the last time I got out of the car today I heard it. I believe it was replaced five years ago after a collision with a Trailblazer wiped out half of the front end ( but with no power train damage). I checked the VIN for the inverter pump campaign, but my VIN was not in the range.
Right now my problem is that the car feels a lot faster than it has ever been. When I lift off the accelerator, it doesn't begin to coast as it used to. No warning light of any kind out of the ordinary is present on the dash, although it did have the red triangle on during start up with a message about the parking gear not being engaged properly. That warning went away after the change in performance occurred. Related?
I guess I will take it to the dealer to see if there are any codes stored. After my 30 mile commute this morning, no whining, buzzing or any kind of noise was present after I shut off the car and I got out. There is still no warning light.
Had this car for two years and I love it, but the central locking has been a bit glitchy since I bought it. Sometimes it works perfectly for weeks.
Sometimes it unlocks the driver door just fine, but a second click of the button won't open the other doors.
On a couple of occasions (today was the second time) it won't unlock any door. If I use the keyhole in the driver door to unlock that door, I have to hold the key to force the lock to stay up while I pull open the door with the other hand. If I let go of the key, it relocks itself.
After I manually unlocked and opened the driver door, I reached in and pressed the button on the console. It would not unlock the doors. This car has only one door keyhole, the one on the driver door. Locking always works on all doors, and it locks the doors itself as it should as I take off down the street.
When it is misbehaving, it misbehaves with either key and the console button does not work either, so I am pretty sure the problem not the transmitter.
If it always behaved as it did today, I would suspect that the microswitch in the driver door was shorting, and telling the system that the key was in the door and turned full right all the time. However, that would not explain why the usual failure is to open the driver door but not the others. Where is the receiver for the remote lock control?
I have purchased a new 2013 XC60 and the seat and mirror memories associated with my keyless Personal Car Communicator (PCC) system are not working properly and the dealer is apparently at a loss as to how to fix it. What is even worse, Volvo's documentation on the capability is contradictory and no one from Volvo (including National Tech Support) is able to explain how it is supposed to work.
The total problem is much too complicated to explain here in detail, but basically the driver's seat and side rear view mirrors do not respond to the PCC (key fob) in a predictable manner. One time use of a particular PCC will result in the seat and mirrors going to one location, and the next time they will go to a different location. Use of the buttons on the PCC will produce one result and use of the keyless capability with the same PCC will produce a different result.
I have determined that the settings saved in the seat memory buttons (there are 3 of them) sometimes play a part in where the seat and mirrors go when the PCC is used despite the Volvo documentation insisting that these memories are separate from each other.
Volvo Tech Support insists that they have no history of problems in this area but discussions with other customers, and even some of the Volvo sales people, make it clear that I am not the only one experiencing these issues.
Although the memory settings would normally just be considered a convenience option, I have found the issue to be a safety concern. On more than one occasion I was on the road before realizing that my rear view mirrors were pointed off in space somewhere and I could not use them to make a safe lane change or other maneuver.
A side observation is that the computer based functions in the car appear sluggish and seem many times to operate with a lag. I know that this car contains almost two dozen processor modules and maybe this topic deserves a separate thread, but it is as if the communications network is very slow or the modules are slow in waking up. I'm wondering if this is involved with the unpredictable seat and mirror memory operation.
I would like to hear from others who have had or are having similar problems.
When i purchased the yaris ZR they had none with the Suna Audio and navigation system so they said they will ship the device in and then install it when they finally had it.... So I was driving this one around with the default device in or awhile. Everything was working fine, audio, messaging, calling and listen for a while. Everything was working fine, audio, messaging, calling and listening to podcasts ad audiobooks through apps on my phone. I am using the Samsung Galaxy S5 Everything has been updated and using all relevant updated software.
When they said it was finally in, i brought my car in and after a few issues and shipping the wrong parts I finally got it. (I was driving the latest Corolla in the meantime)
Bluetooth is cutting out every 2 minutes (and halfway through at about 1 minute there is a glitchy/pause/lag) .... It keeps saying something like "Connection with the mobile telephone has been disconnected" and my audio stops playing. It takes about 15 seconds to reconnect. And then i have to push the Audio power button twice to get back to listening to my media. Phone is fully charged, and plugged in. There are no distractions from anything else (The Original old device that came with it never did this). You can't play audio via USB with an android device on either this one or the old one so that option is out.
Messaging is not working - Worked fine in the old/original device on the Yaris and the Corollas I was using, when i got a text, it beeped and read it out - and i could quick reply with automated messages (if the car was not moving). Now, when I try to load them a message just stays on this screen for about 5 minutes then disappears - nothing happens. "Retrieving messages please wait....."
Last spring i purchased an 08 600hl. This is my first winter with this car and I have come across an issue. when it is extremely cold like it has been for the past few days the heating system for the interior of the car does not seem to be working properly. when i warm up the car and put on the heat it blows cold air. It is only when I am driving that the heat comes on. While i am driving at a moderate speed the heat works fine. However, when i drive slow, such as driving around a parking lot and its only running on hybrid battery power, it starts to blow cold air again. When i put the car in park and its only running off the battery i only blows cold air even on the "HI" temperature. I have the rev the engine to get the heat to kick in and then it will stay on. This is and issue or a normal behavior for this car.
View 6 RepliesJust picked up a 90 Ranger last night, 4.0 EC, good ole A4LD, from a recipt I found has 70K or so on rebuild, was driving it today and the TC unlocked, and now it won't lock back up. I checked fluid and it was a little low, topped it off and drove it, and it was the same thing. I'm kinda new to thease A4LDs I know they can have issues, but can be good too. Just want to know whats going on so I can fix it! No codes were found when I scanned it. Trans otherwise shifts fine, you can feel it go into OD but no lockup.
View 13 RepliesI have a 2004 Explorer that the anti-lock brake light comes on. Brakes work fine. What to look for first ?
View 4 Replies I was driving my F2007 Ford Focus and all the lights on the dash went on and then all the power went off and the car stopped. Once it stopped, there was no way to get the power on and I couldn't switched gears. I guess I shifted into park once the car started freaking out and now it's impossible to switch to neutral. The only light on the dash that works is the anti-theft symbol, which seems to go on for a second when I turn the ignition on. It doesn't stay on solid.
From what I've googled, it seems like the car's computer got tripped into activating the car's anti-theft locking system? I'm not really sure. (I was driving the car while this happened -- scary!) But AAA towed the car to a random auto repair shop near my house. Should I be having a Ford dealership look at this? Or is it fine in the hands of a private repair shop? Timing couldn't be worse -- I was going to drive my car across country for a new job in two days, so I'm hoping this can be sorted quickly and my car will be safe to drive by then.
I have a 2000 Buick Century. The wiper controls are all goofy. The delay seldom ever works, just goes into slow steady speed most of the time. And they go through several more cycles when wipers are shut off. No doubt some entire multifunction module will have to be replaced.
View 8 RepliesWell I have a weird thing going on with the anti lock brakes. Its normally more noticeable when its cold. Coming to a slow stop you can feel the anti lock brakes pulsing slightly or more noticeably if you hit a bump braking at slow speed. The only mods to the truck are 285/70/17 inch tires and a leveling kit. Not sure whats going on with it, but i thought i should check here before getting my wallet lightened by the dealership.
View 2 Replies