I have a 1990 F350 super duty truck, the rear stop/turn light doesn’t work. It has voltage, light bulb and connector are new and connection is good, is some thing else I need check?
View 1 RepliesMy sons 2006 F350 brake lights and rear turn signals quit working. When the headlights are on, all the lights operate but the rear turn signals and brake lights do not nor do the emergency flashers. The front signals work but flash very rapidly. Although I'm not an auto electrician, I'm fairly mechanically inclined but the fact that the front signals work, the rear don't and all lights work as lights, just not as turn signals or brake lights.
View 4 RepliesI have a 1990 F-350 7.3 lariat crew cab. The tail lights fail to work but all the turn signal and brake lights work. I changed the light switch located to the left of the steering wheel but that didn't solve the problem. all the fuses under the dash appear to be ok to. Is there another fuse for just the tail lights.
View 6 RepliesMy wife's 2003 sportrac has developed a problem. The left rear turn signal brake light will not work. The tail light does. When you turn on the left turn signal the front bulb and the dash light flashes real fast. I have changed both, the front and rear bulbs with no luck. I've read on here about the tilt steering column deal. I have moved the steering column while operating the turn signal with no change.
View 4 RepliesI just got a 2000 F350 cc drw 7.3l.
I did search but have had no luck. My turn signals do not work, unless my foot is on the brake pedal my green arrow indicator wont even turn on. When they do my bulbs work but don't cycle so I know all the bulbs are good as I had my wife check all four corners when I got them to come on for a split second. I have tried replacing the MFS and the turn signal relay under the radio in the dash.... When I do turn on my blinkers I can hear the relay click once but that is it, no more.
I tried checking the wiring in the column and tilting the column to its extremes while trying to engage the turn signals. Also, if I unplug the brake light switch then I do not get an arrow on the IC to light up so I am guessing the power flows through that switch. I don't have a chilton manual yet and the owners manual was not in the truck. I did check fuse 23 ?
I own a 1990 Volvo 740 GL. It cut off at a stop light one day and now it will not start. It seems to be a fuel related issue, if I squirt staring fluid into the intake it will start but cuts off immediately. I removed the fuel line that connects to the injectors and no fuel is coming out. I checked both the number 1 and 11 fuses both are fine. I have replaced the fuel filter, fuel pump, and the fuel pump relay.
View 14 Replies2010 F-150 owner. Why my left trailer-stop/turn will not work on any of my trailers. This issues has happen to me in the past due to a wire grounding out in one of my trailers, I have fixed the issue in the past by changing the 20amp trailer/tow fuse, this time the fuse looks fine and I am still not having any luck finding the issue. I have went through my manual to see if it could be a different fuse and they all seem to check out ok, I have also messed around with the relays and they seem to be fine too?
View 2 RepliesMy problem is my 6 CL died going down the road I got to stop light & she quitly died. I got it started after a few tries & made it to BK, kept trying to start sounded like choked for gas. Hour later starts goes 1/2 mil dies call towtrk. Changed fuel pump(not so bad) fired her up, first couple times ran a sec. and died.
3rd time a charm it started & idled (a lttl ruf) for 20 min.& wife takes it to gas station shut off & restarted no problem & back home. 1 hr later I get in to run an errand & it dies I push it hm pop hood seems awfully hot. Is there a way to test the CPS unit?
2004 F350 6.0 Diesel 2WD, Question is my trailor lights running lights work fine also the electric brake, but i have no stop or right or left turn signals the truck signals are all working perfect. The truck came with factory wiring i have checked it at the plug on the bumper with meter to make sure it was not the trailor. Looked for blown fuses and cant find anything what am i missing it should have seperate fuses for trailor lights ??
View 14 RepliesI have a 2005 f350 6.0, my left rear stop signal is not working. I have changed the relay. I only get 5-6 volts at the plug and green-orange wire all the way to the engine bay. Not sure what the problem is????
View 11 RepliesSo my dash turn indicator light flashes really fast (sometimes), and I have no brake lights (no left, no right, no high mount center), no rear hazard lights, and no rear signal lights. I do have tail lights. Fuses are good. What could be the problem? 2001 Ford F-350, 7.3L Powerstroke.
View 4 RepliesThe turn signal lights in my brother's 2000 passat are staying lit when he turns the signals on. They work sometimes, for a few clicks, but then stop working.
1. is it the turn signal relay. It sounds like its in the middle of the dash.
2. how do you get to that relay?
Have to remove the HVAC controls? if so, how the heck do you do it?
[URL] ....
I have an 08 F350 regular cab 4X4 that the cargo light doesn't work, Is this powered from the interior light like the old ones? or does it get its power from the GEM module? If it comes from the GEM is it possible to feed it like the old ones from the interior dome light without killing something? I really miss having a cargo light.
View 3 Replies2013 f-250 crew cab short box, 6.2 gas with 48k miles. Right rear turn signal does not work...SOMETIMES. I took the brake light assembly off...bulb is good, turned on signal and the bulb will flash so I put it back together then drove a couple miles and then signal quits working again. I can't find any loose/corroded/bad wires at the bulb socket and I can't get the bulb to quit working when I have taillight assembly apart, (trying to replicate failure). There are never any blown fuses either.
View 5 RepliesI just bought an 05 F250 XLT. I noticed tonight that the rear turn signals and brake lights don't work.
The front turn signals work fine, although they flash fast. I know that usually means a light on its way out. neither taillight flashes though, which puzzles me.
My second issue is that, of the 3 brake lights, only the high mounted light illuminates when I hit the brakes.
2001 f350 v10, initial problem was when i came to stop at light it idled rough. I changed all plugs,injectors and COP, and bad connectors thereto. Changed the clock spring as well. Now the truck idles like crap at first start of of the day then run fine there after. Replaced IAC, TPS, Temp sensor. Condition getting worse and now the temp gauge does not work. I am thinking maybe CAT Converter loaded up?
View 2 RepliesI'm swapping a 90 E4OD into my 86 6.9 F350 and find my injector pump won't take the usual throttle sensor. I'm wondering whether the controller (from a 90 E350) cares about intermediate throttle settings or is it only worried about coast vs wide open.
My options appear to be rigging some sort of linear travel pot, or would limit switches with something cobbled together to give two resistances be enough?
I've got a 98 Silverado. Break lights and rear turn signals won't work but tail lights and reverse lights work. Also the brake light on the cab does work.
View 6 RepliesI have a 2004 F150 XLT and the passenger side tail light doesn't work whatsoever. The light does work for hazards, turn signal, or when braking. The passenger front turn signal works, so does the front and the driver sides tail light. Only the 1 tail light doesn't work. I bought a new brake light bulb and it didnt't fix it, so i swapped the drivers and passengers bulbs out, and it still didn't work. I replaced the 10 amp fuse (#36) in the fuse box. What is causing the problem.
View 2 RepliesI am not the original owner of this 1990 E250 cargo van with a 302 in it. I am trying to troubleshoot this shudder I am having. It only happens when I am just starting off from a stop. Every other place the tranny runs and shifts great. I trying to find a starting point and after reading a bunch in a bunch of different places, I am confused as to the tranny I have or even had.
It has in big bold letters METRIC on the bottom of the pan. It also has Automatic Overdrive and Ford on the bottom of the pan also. It is a 14 bolt pan with the two rear corners of the pan chamfered off. I see now it is DEFINITELY the AOD installed and NOT the AODE. The thing is my steering column is labeled 1 D and OD. That is a 3 spd overdrive to me. What the heck is going on? How can I tell what the tranny was that came out of the van?
When I look under the van at the shift linkage, you can definitely tell the linkage is colored red which to me looks like somebody has been down there playing around. Is it possible to put a AOD into this van with the steering column the way it is? Could this be a reason for my early shudder at starting off from a stop? Once I put my foot in it or get moving at a quicker pace, the shudder goes away. Something is not right with the way this tranny is set up. I am not even sure where to start.
I have a 2002 Toyota Highlander. The rear right turn signal and break light don't work when I apply the brakes. When I use the turn signal or brakes while driving or parked there is no problem, but once I apply the break the back right side does not work. The light bulbs also burn out faster on that side.
View 4 Replies