Ford - F250 :: Emergency Brake Does Not Hold
Mar 14, 2011
The emergency brake doesn't hold on my truck. It's two-wheel-drive. Is there any way to adjust it?
View 4 Replies
Mar 14, 2011
Advertisement
SC/SL/SW :: Emergency Brake Handle Won't Hold / Slipping
My friend's Emergency Brake is tricky: It usually doesn't hold, but pops off again. Its as if the 'teeth' somewhere inside were worn or maybe a ratchet has been rounded.
View 3 RepliesFord - Brakes - F250 :: Emergency Brake Pads Replacement?
Looking for instructions on how to replace emergency brake pads on a 2003 F250 2-wheel drive Ford truck?
View 11 RepliesFord Super Duty (1999-2016) :: F250 - Emergency Brake Cable Broken?
1999 F-250 ... How does one replace the emergency brake cable? The cable in the '99 F-250 I recently bought broke.
The cable was sticking when I got the truck. I like to use the emergency brake every time I park. The previous owner(s) didn't use the emergency brake and the cable had frozen up.
I tried using it every time I parked. I could tell it was frozen, but I was hoping it would loosen up. It held a little bit when I used it; but soon it just broke.
Ford Super Duty (1999-2016) :: 2003 F250 - Pedal Slowly Go To The Floor When Hold Down Brake For Long
I don't know what's going on maybe some body can shed a little light on this. If you hold the brake pedal down for a long period of time you can feel the pedal slowly go to the floor. So no problem I'll change the master cylinder bleed everything brand new fluid. Don't drive it much we let the sister in law drive it we'll I jump back into it the other day to go to Home Depot and once again I notice it still does it. Could the hydra brake booster be bleeding by or what's else could be causing this it's driving me insane. I really can't imagine the hydra booster causing a problem but it's new to me. I was thinking about bleeding the brakes again thinking there maybe there's air but I have run 2 bottles of brake fluid through how much more??
View 8 RepliesFord Brakes/Suspension :: 2006 F250 - Rattling After Doing Brakes / Emergency Brake And Rear Wheel Bearings
Before I get started... My truck is a 2006 F-250 Super Duty XLT 6-speed 4x4 with a Limited Slip.
I just got finished with a big job on my truck. New pads all the way around, turned rotors, new emergency brake shoes, hardware, and backing plate as well as replaced the rear wheel bearings both inner and outer as well as the axle o-ring and inner seal. Also, took off the rear pumpkin cover painted it and put fresh fluid in, went with Mobil 1 75W140 LS.
Took it for a drive and the brakes work great. Followed the directions for breaking in the emergency brake which worked fine.
Now the problem is I'm getting rattling from possibly all of the wheels. Definitely from the front driver and at least one of the rear wheels. It was so dark I didn't get a chance to look at it I just pulled it back in driveway.
I'll start looking at things tomorrow but, any common mistakes or things I should check first?
Ford - Explorer :: 1992 - Emergency Brake Stuck
I have an '92 Explorer 4X4 with a stuck emergency brake. I have tried tugging on the lines from the back of the truck (where the line splits into two beside the frame). The brake is stuck in the on position, and when I pull the release nothing happens. It has been cold here lately, so i thought they were frozen, but after pulling the release lever, it seems like a mechanical issue.
Any temporary solution that get my truck drive-able and to my mechanic for a closer look. I am not very mechanically inclined but it seems to me that the release lever is pulling at nothing and not moving the cog to release the actual emergency brake.
Ford - Taurus - Wagon :: Harmful To Use Emergency Brake While Parking?
I always put on the emergency brake before putting the car in park. My husband only uses the park gear and not the emergency brake. Is this harmful to the car?
View 13 RepliesFord Excursion :: 2002 - Loud Bang When Applying Emergency Brake
2002 Excursion 4x4. While applying my emergency brake today I heard a loud bang. Now, the parking brake won't come up when I pull the parking brake release. Also, the noise is driving me crazy. Is there a way to release the pedal until I can get the cable replaced?
View 1 RepliesFord - Ranger :: 1993 - Emergency Brake Only Stops Truck From Rolling Forward
My emergency brake works fine when I am parked nose down; it prevents my truck from rolling forward. When I'm parked nose up, the e brake doesn't stop the truck from rolling backwards. 2.3L 1993 ford ranger manual trans.
View 3 RepliesFord Super Duty (1999-2016) :: F350 - Emergency Brake Adjustment
I have a 99 f-350 , which i bought recently and either the calibers are froze up in the rear or the cable looks too tight.. Is there any adjustment.... Every place i looked it seems to be none..... on my old 1988. Icould adjust it where the 2 rear cables joined the 1.... Am I missing something or cut the 1 main cable and add a turn buckle....
View 14 RepliesFord Super Duty (1999-2016) :: 1992 - F250 Brakes Won't Hold Pressure
I have a 1992 F250 7.3 diesel 4x4 My brakes wont hold pressure I replaced master cylinder and calipers had the system pressure bled. I don't have any fluid lose and vacuum is good. Can the proportioning valve let fluid bypass, or the rear anti-lock braking system valve let fluid to bypass.
View 14 RepliesFord Brakes/Suspension :: 2000 - Parking Brake Shoes Won't Hold The Truck At All?
I have a 2000 F350 4X4 with a V10 under the hood and a 5 speed manual transmission. It has a heavy western hauler bed, and a dual tired rearend. The truck has disc brakes all the way around that work great. I bought the truck used and immediately replaced all the disc brake pads as well as the seperate parking brake shoes and I had the parking brake drums turned. My problem is the parking brake shoes won't hold the truck at all and never have even when they were new. The parking brake shoes seem very small to me for a truck this size and weight. I have adjusted them as tight as I can with out causing them to drag when they are released. Is this a common problem for this type of parking brake on this type of truck? Is there something I am over looking or need to do to perhaps improve the parking brake? Would it be possible to splice some sort of "locking" valve into the brake lines going to the disc brakes to perhaps hold them engaged when I park the truck? I have a good idea how air brakes work, so I suppose this "locking" valve would work like that except basically opposite of a locking air brake valve, if that makes any sense.
View 14 RepliesFord Aerostar :: 1997 - Brake Lights / Turn Signal / Emergency Flasher Stopped Working?
I have a '97 AWD and my brake light, turn signals and emergency flasher have stopped working. I've checked all the bulbs, checked all the fuses (under the dash) replaced the flasher just in front of the fuse box...nothing. All the running lights work, and the 3rd brake light above the rear door window works.
View 3 RepliesS-10 :: Brake Light On - Emergency Pedal Was Down A Little
Let my brother borrow my 98 S-10 and before he even got home with it he called and said the brake light was on. I figured it was the emergency pedal was down a little. Said there were no leaks. Got it back today and the fluid level is way down. Filled, but the low pedal is still there. Can find no leaks. Also the ck engine light is on. May not be related. Didn't get a chance to ck code.
View 14 RepliesGolf/GTI VI :: Emergency Brake Getting Stuck?
Okay let me start by saying my car is APR Stage 1. The other day I was driving with my cruise control on and held in the accelerate button to speed up. After holding in the button for a couple seconds the check engine light and battery light flashed back and forth as if I changed some setting with the tune. Ever since that happened, if I turn the TCS off, the emergency brake light comes out and the error message 'check brake pads' is displayed on the MFI. Also, the weird part is that it's not just the light. The actual emergency brake is slightly on without pulling the handle. I can feel it when I accelerate. It's harder to get the car going. Once I turn the car off and leave it off for a few hours it goes back to normal. Why this is happening?
View 1 RepliesPrius (Gen 2) :: Unusual Noise When Put On Emergency Brake
My 2007 Prius has started making an unusual sound. At first I thought it was some kind of pump or something, but now???
When I put on the emergency brake, the brake pedal or when I put the car in park or take it out of park and put it in D, it makes a "chuck chuck chuck" sound, not high pitched, but not a low sound either. It seems to be coming from under the hood on the left side. It sounds something like a belt slipping or a pump with a squeak maybe?
It does not appear to make this noise when simply depressing the brake while driving, so I'm not sure it's the same abs actuator issue.
Camry :: Using Emergency Brake Every Time On Park?
Do you use Emergency Brake every time you Park, and why?
View 14 RepliesPassat (B5) :: 2001 - Emergency Brake Not Staying Up
I just bought a 2001 1.8t passat and the emergency brake the other day stopped working. The button is pushed in all the way and will not come back out, so it does not click when the brake lever is pulled up and will come back down when let go of. The brakes do work when the lever is pulled however. Also, keeping the car in 1st gear while parked is alright? Even on a hill?
View 2 RepliesSanta FE SM (2001-06) :: ABS And Emergency Brake Light Come On
I have a 2004 Santa Fe with the 2.7L V6. There is a recurring issue where the ABS and Emergency Brake light come on, followed by the fuel gauge dropping to E, then all lights dimming until they go out. The car continues to run, but if you shut it off it won't start for about 30 minutes, then it start just fine with full power. The alternator and battery have been replaced twice in the last 10 months, most recently 3 days ago. The problem persists. I did find the right downstream O2 sensor to have broken wires which were causing a short. I replaced the O2 sensor and wiring harness, which cleared all engine codes, however the problem does still exist.
View 7 RepliesTouareg :: Release Emergency Brake Message In The MFI
Had this issue on my first Touareg as well as the replacement. When you pull the emergency release handle (firmly and all the way) it doesn't fully release the brake. You realize this when the vehicle begins moving and you get the "Release Emergency Brake" message in the MFI.
They replaced the emergency brake assembly. The service rep told me before he returned the car to me that his tech was less than satisfied with the design of the hydraulic assembly and that he expected it to develop the issue again. He was right. Two weeks later the thing is sticking again.