Ford :: Temp Gauge Goes All The Way To Cold When Stopping Or Slowing Down
Nov 29, 2012
I recently replaced my alternator. I thought I was very careful not to make anything worse but now when I'm driving I have temperature issues. When stopping or slowing down my temp. gauge goes all the way to cold, then as I accelerate the temp gauge rises to the middle. It has not gone past the middle and has never done this before the repair. Also, the truck has never overheated or had any thermostat or cooling issues before.
View 6 Replies
Advertisement
02 6.8 4x4 excursion. When I start the truck cold, the trans temp gauge immediately moves to "running" temp. Not really sure how this happens, I'd figure that if the xducer was trash it would ride all the way high or all the way low. What's happening here? I'd sure like a functional gauge...
View 6 Replies
I have a 2001 Excursion Limited V10. 146000 miles 2 wheel drive. I have had it about a year and this is my first winter to really have experience with her.
When the outside temperature is very cold and the engine is cold from sitting all night, at start up, the oil pressure gauge reads nothing and the oil pressure/temp idiot light is on. Only does this during the first very cold start up or after sitting and engine getting very cold again.
I can drive just a short distance (2 blocks) and both gauge and light go to normal and stay there for the rest of my drive. I am using a quality 5/20 oil and filter and the level is good. Warmer days it has never happened. Truck runs fine, smooth idle, no "limp mode". She has not had any recent work done. All the other dash gauges read fine.
There is something about really cold temperatures that have to be causing the issue , I think. ??
View 5 Replies
I have a 95 ford f350 when u run it with the heat on the truck temp gauge says its overheating the heat will go from nice and hot to ice cold as soon as the temp gauge goes up to the red. I replaced the thermostat also checked for coolant leak cant find any but truck has strong anti freeze smell and the radiator keeps going low on coolant.
View 2 Replies
I am trouble shooting my temp gauge. I have a 1997 f350. I brought the truck a year ago and i have still not fix this problem. I install a new temp gauge and nothing changed. When ever the truck is running it reads cold and doesn't budge. Ive read that the gauge can be broken its self but during a few hot times over the summer. The gauge began to rise slower, never reaching normal temperature. A few times i messed with the heat and the gauge would shoot over the normal temp. The truck seems to run at a good temp sometimes hot though. The tube on top of the radiator is hotter than the bottom also.
View 3 Replies
My 94 Ranger 3.0L 5speed 2wd temp gauge is staying on the cold side but the heater is working good and I used a laser pointing thermometer at the thermostat housing and got 180* after running for a while and I also noticed that the fuel economy had gone down along with the power. I was getting 340 miles to a tank but now I'm getting 280 per tank.
View 12 Replies
I have a 2002 F-350 6.8L, 4x4, crew cab, 8' bed, SRW, trailer tow pkg. I purchased it new in the fall of 2001. The truck currently has 54,000 miles on it (only gets used when I need to tow/haul something). It's kept in the garage and is in near showroom condition.
Everything on the vehicle is 100% functional except the transmission temperature gauge. Even when the truck sits for weeks, the needle will move to mid scale as soon as the key is switched on - haven't even started the engine yet! Put the scanner on it - no codes stored.
I'm attempting to trouble-shoot the TFT (transmission fluid temperature) sensor. Found some documentation online on the 4R100 transmission. It shows an electrical connector on the solenoid body with pins for the thermistor (so I can measure its resistance). However, I can't find a connector anywhere on my transmission that even remotely resembles the diagram I found online.
Question 1: When you first get in your vehicle and turn the key, does your tranny temp gauge read "cold" just like the engine temp gauge?
Question2: Does my truck have the 4R100 transmission? How can I verify that?
Question3: Looking for documentation on what connector and which pins are for the thermistor?
View 3 Replies
2006 F150 King Ranch. My Air Conditioning no longer blows cold air. Additionally, the Temp Guage is pegged dead left. No movement at all even at normal operating temp. I've had the dealer replace 2 sensors and a wiring asy (XL3Z-14A411-AA). I still have the same problem. No cold air and the gauge is still pegged dead left.
View 3 Replies
I have been having a problem with my 2002 F250 Super Duty 4x4. It started about 2 months ago. I was in traffic (truck hadn't even been on for 15 minutes). The temp gauge spiked, so I pulled over and turned the truck off. I turned the ignition on and the gauge was normal so I started it and all was fine.
Fast forward a little and every so often about every 3 weeks it would overflow (coolant) but not get to the point that it would overheat. I changed the thermostat and all seemed good to go. Fast forward to yesterday morning. Got in the truck and left to go hunting, and I didn't even make it 10 minutes down the road when I turned the heat on and it blew cold.
I started to see the gauge creep up so I pulled over and shut it down. Upper hose was cold, lower is cold and both heater hoses are cold. After some time of waiting, I started it but the gauge kept creeping up and no heat, so I kept shutting it down. After about 5x of this, the heat worked and the upper hose got hot and all was right with the world. SO I drove it home. Coolant is new, flushed about a month ago and was running great since then. Thermostat is new. Do I have a blockage somewhere? Water pump bad?
View 4 Replies
Was driving my truck I have a 97 f150 4x4 4.6L, btw. The heater started blowing cold air and I looked at the temp gauge but it was showing lower than it normally does and then, after a couple of miles or so I looked at the temp gauge again. By this time I was in my driveway. And it was overheating it might have been that way before I looked at the temp gauge again. But any way I opened the hood didn't see any leaks, all my hoses were hot except the top heater hose. Also checked the oil it was full and coolant was too, what this could be? Sounds like a t-stat to me? But could be worse. Also forgot to mention that the oil had no signs of water in there nor the expansion tank cap !
View 3 Replies
Alright so noticed the other day that my temp gauge was staying pinned at cold. every once in a while it will jump up to the normal range but not for more than a few seconds to a minute before it drops back to cold. I just bought the car so I've still got a warranty from the dealer and im fairly convinced that I don't have to bee too concerned with it over heating because when the gauge DOES register its saying normal. just thought id ask here before i drive the 2 hours back to where i bought the car.
View 11 Replies
I have a 2003 f250 with the 7.3 power stroke in it. It is factory height on a set of 285/75 16 tires. It already has a reman steering pump and I replaced the steering gearbox today due to the truck having a little slop in the wheel. Since I bought the truck it is dang near impossible to park in a parking lot and almost impossible at a stop sign or being stopped to get it to turn whether I'm on the brakes or not it doesn't seem to make a difference. What else could be affecting the steering on the truck? All the steering components are good. I'm about by to the point of just selling the truck because it's that hard to steer. Especially trying to back a trailer is hard too.
View 9 Replies
TRUCK: 2003 F250 S/C Long bed 4x4 7.3 Diesel
PROBLEM: grinding noise in left front when slowing and stopping.
Starts as a howling noise, turns into a grinding as you brake and come to a stop. I feel it in the pedal and as it slows it feels like metal to metal brakes
WHAT HAVE WE DONE: Replaced both front hub assemblies (MOOG)... Replaced dust shields, rotors, calipers, pads as well as all new brake hardware.
At any speed when I brake hard it grinds and howls, I have taken out the 4x4 locking hub assembly and it does not change the situation. I am stumped!
View 6 Replies
On my 97 X SOHC, I have a temp gauge that is rather erratic. It reads high even with the engine off and cold and rises when the engine is running to the point the "Check gauges" light illuminates. Then bounces to normal then back near red line. This cycle continues.
To evaluate this, I bought a scan tool and the ECT reads as expected, around ambient to start, gradual climb till the thermostat opens, then hovers there while the radiator does its thing. Heater works as expected. So I'm fairly confident that my X doesn't have a cooling issue.
What my questions are: Can I disconnect the temp sender so I'm not watching the gauge bounce around and then the Check Gauges light is available for other issues that arise?
Does the check gauge light also send a signal back to the PCM?
Can I do any damage to the truck or will the PCM throttle the power back and flash the Check Engine light if a real cooling issue materializes?
View 4 Replies
My Jetta runs great in the summer and all seasons around town... the temp stays around 195 or so, the heater works ok, etc. When I get on the interstate however (now that the temp has dropped) , the story changes. The temp gauge falls below 150 and the heater gets cold. I assumed the thermostat was stuck open, so I replaced it but it didn't solve the problem. I called a local dealer and on his recommendation, I replaced the Engine Coolant Temperature (ECT) Sensor. That also didn't solve the problem. I have had cars overheat in the past, but never one that overcooled! Wy my car cools too well at highway spheeds? It affects my gas mileage and makes for an uncomfortable ride on cold days!
View 12 Replies
The truck I'm working on is a 2003 f550 with a 6.0, and 382000 kilometers. My service truck died on me couple days ago, while running. As I rolled to a stop, I noticed that my temp gauge on the dash dropped to cold. (Truck was hot). Tried starting, and I have a crank, no start situation.
After towing it to my shop at work, I hooked it up to my scanner, and found that the pcm will not communicate with the scanner (otc genisis). I have no injector buzz with key on, wait to start light comes on for an abnormally long time. I have 48.3 volts on the ficm,(4 screw), and haven't been able to find any chafed wires as of yet.
View 1 Replies
I noticed on cold mornings (40-50s) the gauge does not go half way even driving 30 minutes, about a bit more than 1/3. In the afternoon or most of the time it points to about middle.
Is the gauge that sensitive or there is a problem with the thermostat? The thing is I don't feel the car is slow to warm up normally, I rarely heard of thermostat problems on a Toyota until a whole lot of miles. I wish I have one of those ODB2 logger now and maybe it reads the coolant temperature.
View 5 Replies
On my way home from work I noticed that my heater was blowing cold air. then I checked my gauges and noticed that the temp gauge was moving toward hot. pulled over on side of road car died on me. Husband pulled car home replaced top water hose. Now my car will not start.
View 10 Replies
I have a 2001 Miata. It's been over 100 degrees daily lately. The AC will blow sort of cold for about 30 minutes and the temp gauge will move towards the H hashmarks. If I turn the AC off, the gauge will slowly drop. I've also noticed that the amount of cold air is decreasing as time passes. In fact, the other day, the system was blowing air hotter than the outside temperature after about an hour drive.
The viewing glass has bubbling stuff flowing thru it. The recently flushed radiator is full as is the overflow reservoir.
View 2 Replies
Issues with my '86 Toyota MR2... So, I just recently bought this car earlier this year and it's always seemed to be giving me problems. One of the major ones is that the engine is always dying. When it first did this a couple times after I bought it, my dad and I assumed it was the alternator(we figured it couldn't be the battery because the battery that was in it was relatively new, but we took it to Auto Zone to check the volts on it anyways, and it was all good; we did get the alternator checked also and the guy said it was the alternator), so, we bought a new alternator and my dad and I replaced it. About a week or two later, it started back up with the issue. Whether I was stopped at a red light, slowing down, or making a turn, the engine would die. So, whenever I'm at a red light, I'll put the E-brakes on or put the car in neutral and just get the RPMs up, but shortly after I rev it up, it'll stall. And I try pushing the clutch in all the way, majority of the time, it doesn't make a difference and dies anyway.
View 19 Replies
As I was driving, my break light came on and my ABS light came on. Also, the temp gauge stopped registering and my AC stopped blowing cold air. Is this a familiar problem or do i have a legit electrical problem.
View 1 Replies
