I just purchased a used truck that was originally from Canada. The settings on the temperature control are all in Celsius. how (or if if can convert) to Fahrenheit
View 6 RepliesIs it possible to switch the temperature display (outside and the climate control) from Farenheit to Celsius? Couldn't find it in the settings anywhere but maybe I'm missing it somewhere. I've got a C3 ....
View 8 RepliesIs there a way to change the outside temperature info display from Fahrenheit to Celsius. I have a 2011 Sonata LTD?
View 20 RepliesHow to change the temperature setting from Fahrenheit to Celsius in Camry 2012 LE.
View 6 RepliesIs it possible to change the Climate control system to show in Degrees Celsius instead of Fahrenheit? It displays the temperature inside the vehicle on the lower dash display under the radio. I read all through the manual as well as mashed every key on the dashboard but no luck...
View 5 RepliesI just purchased a Gen III Prius II (I am a Honda Insight convert). The question I have is... Is there a way to change the Climate Control Temperature and the Outside Temperature read outs to Celsius instead of Fahrenheit? I know pressing the MPH/km/h button changes the the speed, distance and fuel consumption, but not the temperature read outs. I prefer Celsius as that is what I was raised on.
View 7 RepliesDon't know how to change the default screen setting so that it stays in either radio or Media screen. It automatically reverts to map after pressing the radio or media button.
View 3 RepliesI'm looking to buy a used 2005-2007 6.0L and bought a ScanGauge to take with me when I look at the next truck I'll be considering. I dont have a truck now and I see that the ScanGauge derives power from OBD port of the truck. Is there any other way to set it up in advance?
View 9 RepliesSo I have a 2005 GMC Sierra 1500 pickup that is in great condition. Recently, I have noticed that in the mornings on my way to work the blower fan would not run on the highest setting. After a while of driving, the highest setting would then work. This happened for about two weeks. Now, the blower will not turn on at all on any setting. Thought it might a simple fuse, but that looks fine. Should I take it to the shop? Could it be the blower motor that needs to be replaced?
View 3 RepliesI have noticed if I turn on the AC and set it to any front defrost setting (either full front defrost or mix front defrost and lower vents) and turn up the heat that when I turn it on the next day there is a horrible smell. If I run the AC and turn the temperature up there is no smell so long as I don't use any setting using the front defrost. The smell is bad enough that I have to open the windows to air out the car. After a few minutes the smell goes away.
The car is an '06 XL. I noticed it intermittently when I first got it two years ago, but this winter the smell happens every time I use the AC on any front defrost mode. My guess is the heating element under the front windshield. If I turn on the heat without the AC on any front defrost setting I do not have the problem.
How many degrees should cool the air conditioning? My Golf 4 has about 14 years and doesn't seem to cool as much as before. Measuring with the probe of a multimeter, the temperature of the air coming through the air vents drops 10 C below ambient temperature. For example at 28 C ambient temperature I can get 18 C through the air vents, but doesn't seem that low. After the air mixes inside you don't really notice a big drop.
View 2 RepliesToday in NY the temp in the morning was 0 d F. As I started up the car I hear a rough aggressive movement coming from the engine compartment then the Ready sign, beeping and the check engine light, (Giant red triangle ! Emergency sign), and the (!) sign.
I turned it off and one 3 times same thing, I decided to leave it and turned back home, then I noticed the battery level dropped to 2 bars from like 5 bars within 5 minutes. I did/was able to move the car back and then forth just to see if it would work, but the normal engine never came back on(on the computer screen).
Bought a VAG cable, got VCDS 12.12.0 running. Found the instrument cluster and changed the region to ROW(rest of world)(I have a US Tiguan). The center screen on the cluster changes( as in F change to C, Miles change to Kilometers, everything is ok). However, after recoding the cluster the airbag, ABS, and ESP warning lights come on. Once I revert all changes back to the US coding, everything is again ok.
View 2 RepliesI have a 1995 Nissan Maxima. The starter will not engage (no noise at all) when the outside temperature is below 60 degrees. All of the electrical is functional, but when I turn on the starter, there is no click sound or any indication that the starter attempted to engage. The car is a manual transmission, so I push start the car, and there is no squeal when the car starts so the starter gear was not touching the flywheel. Above 60 degrees, everything works normally. I have replaced the starter motor and solenoid, replaced the battery, but the problem persists.
View 5 RepliesI just bought a 2005 5.4L F-150 and need to do an oil change. The manual calls for an FL-820S Motorcraft filter. I bought one and it doesn't match up. The filter that is currently on the truck is smaller in diameter and a little longer. There's no numbers or manufacturer on it. What's up? What filter do I need?
View 14 RepliesI have a 2005 f150 4x4 4.6 with 100000 miles. I am wanting to change my transmission fluid and filter, my dealer says all i need is to flush out the old and put in new, which is what they do, they say no need to change the filter.
View 5 RepliesI just changed the plugs in my 05 stx 4x4 4.6L. Truck was running fine, never a problem but it has 105k so I figured id change them. #4 was the only one that gave me a little problem (besides being so tight). The coil and spring pulled off the boot, and I had to get a pair of pliers and get the boot off the plug.
I simply slid the spring back through the boot and replaced it once I had changed the plug. Other than that they all came out easily. I replaced with motorcraft plugs, and #5 did have what looked like some oil down on the threads when I pulled it out, but not sure if that's a big deal or not
Any way, I am torn between ordering new boots and changing them out, or just biting the bullet and getting 8 new coils with new boots attached. Truck runs fine, but does the usual buck/jerk under a load in overdrive now (never once did it before)...
I have a 2005 F-150 4x2 with 4.2L mojo. If I change the struts, is an alignment required due to slight changes in the top mount location? I plan on having it aligned but timing wise I may not be able to get it all done at the same time.
View 1 RepliesI just purchased a new to me 05.
PO, had a pioneer H/U installed, however the 4 rear speakers have no sound.
The rear of the radio seems to have everything plugged into it correctly.
My steering wheel controls work fine.
I'm guessing the rear volume/controller is canceling out the rear speakers???
If so what can I do to make the speakers play? I don't need the rear control to work.
So, we have a 2005 ford F 250 6.0 diesel and we had the engine changed out from a 2006. Now the truck will not start on hot crank. It will start up normal when cold. So dummy plugs and stand pipes were changed out as well as the oil pump and turbo from the 2005 engine because they were still perfect. What else could be causing the truck not to start up after truck is hot. Does the engine number have anything to do with it? Or anything electrical
View 5 RepliesI changed the oil and filter in my new to me 2010 Avalon with Mobil One 5W-30 and OEM Toyota oil filter.
Prior to oil change was M1 5w-30 oil with a Service Champ oil filter.
Prior to oil change the oil light went off almost Instantly and there with almost no start up rattle.
After oil change the light oil light goes off much slower...say 2-3 seconds and there is engine rattle for approx. 2 - 3 seconds.