Ford :: 2000 - Theft Light Began Rapidly Blinking After Reconnecting Battery - Ignition Disabled
May 6, 2014
I disconnected the battery cable and when I reconnected it the red 'theft' light began rapidly blinking on the dash and ignition/starting was disabled. followed owners manual advice using the key to unlocking drivers door (to re-set anti-theft device) but this did not work. Called two Ford dealers and both say have to tow car in for this to be fixed. Problem is, car is on an island with no towing service available. I'm thinking there must be a way around this. I have two original keys with the key fobs and neither works to fix it by unlocking the door.
View 7 Replies
Advertisement
I have a 2000 EX V10 100K miles. Saturday my anti theft light started blinking rapidly and the truck would turn over but no fuel. No check engine light. Fires up if I use starter fluid. I have read online alot about PATS systems and keys so I tried my extra key.... Did not work. I am planning to try syncing the key with the truck again today. Whats next? I checked all fuses twice. I saw somewhere about the ECM? Might have an issue?
View 14 Replies
I just bought a 00 f150 4x4 with a 5.4 auto...it wouldn't start but not because something was wrong. it kept making a clicking sound and the theft light was one blinking...took my bronco to work and when I came home it started right up...I was thinking one of the keys didn't have the chip in it but it started with both keys....it doesn't have a key fob or keyless entry. I tried locking my drivers door with the key and unlock it...
View 6 Replies
After a cold night when I turn the ignition on only the airbag (blinking) and the battery (steady) icons come on. No cranking - nothing...After a few anxious tries the full set of icons come on and the car starts.No problems during the day. The battery is one year old.The 2007 Ranger (3L engine) has 180,000miles.I've tried my spare ignition key - no difference.Is this a PAS issue or a sticking relay?...
View 4 Replies
I have a 2008 F-350. The Anti-theft light blinks rapidly and the truck will not turn over. Give it some time or take the key out of the ignition and in repeatedly and it will start. Sometimes not till the next day. I have replaced the transceiver & key. Did not fix the problem. Dealers all say: they have never seen this before. I would like to just bypass the Anti-theft system if possible. There are times I will just let it run for hours not to be stuck.
View 4 Replies
After installing two new batteries, a new alternator and removing the auto start system still having the same problem. It sometimes wont start. It will turn over but wont fire. If the theft light keeps blinking it wont start. Other times no blinking light and it fires right up. What to check next.
View 14 Replies
I connect the batteries and the overhead lights don't out, plus the theft light is blinking. Bad door switch maybe? I don't have the original Ford key
View 1 Replies
I have a 1999 F150 with a 5.4L. I recently replaced the PCM with a new unit from autocomputerexchange.net that was programed for my truck. I installed the PCM but the truck did not start. The theft light is also flashing rapidly during cranking. I ran a code scanner a recieved the code P1260 indicating an attempted theft which disabled the truck. I read that if you have two keys you can sync the keys with the new computer but unfortunately one of the keys stopped working a couple years ago (not sure why, stopped for gas and it never started back up). Since i do not have two working keys do i have to tow the truck to a dealer and let them reprogram the keys and reset the PATS or can i have a locksmith recode the keys and sync the keys myself.
View 2 Replies
My windstar blew fuse #16. replaced soon. blew again, replaced again. now theft light blinks rapidly and won't even crank over. left switch on long enough to get a code reading from the light, it comes up to # 15.
View 12 Replies
Left the truck sitting for a couple of months while working out of town. I bought this truck used with only 1 key. We rebuilt the engine and had noise issues so we don't want to drive it much until this is resolved. I went out to start the truck to move it and it would not start. It had cranked right up the week before. Now it just spins over and the theft light blinks rapidly. I've check all the door locks.
When I called a Ford dealership all the service guy would tell me is that it's going to have a new key made and I have to have the title on the truck to get it done. AND, I have to have the truck towed to a dealership to fix the problem of it not starting... The battery drained down so I took it out and charged it... only thing I can possibly think of is a low battery or maybe somebody tried to steal it while I was out of town and messed up something.
View 14 Replies
i have a 99 f150 with a 4.6 that will not start. it has sat for a while now. when i go to turn the key to turn it on it cranks and cranks and cranks but wont start. the theft light blinks like crazy and the odometer reads dashes. There is also a relay which i do believe is the pcm relay that clicks like crazy. when the relay clicks and the key is first turned to the on position the fuel pump will turn on and off as the relay clicks.
We tried putting a scan tool to it to try to pull a code and the scan tool wont connect. I do believe its the pats system kicking, but i also think its related to this relay clicking like a mother, maybe a bad connection in the junction or something. But I am not really sure how to try to start and find the problem. i have also tried replacing the relay that clicks and the new relay does the same thing.
View 8 Replies
ive got a 2000 v-10 excursion with 111k. Never had a problem like this before but last week I was driving home an noticed the theft light blinking while I was driving. Got home shut it off. next morning went to start it and nothing! when the doors open it makes a clicking noise under the dash. if I jump it the truck will start right up. If the batt is disconnected them re-connected it will start once until turned off and then nothing until its disconnected again. I ve got an elk hunt in 2 weeks and need to figure it out!
View 6 Replies
My Ford 250 Super Duty, it is a 2008 model. I can't get it to start and the anti-theft light keeps blinking. At least i think it is an anti-theft light, a blinking red lock on the instrument panel. I bought this truck from an auction so I don't have a manual, neither do I have a key set with the push button stuff on it. Just 2 electronic keys. Someone suggested unhooking the battery overnight, and someone else suggested pressing the valet button. I found a button under the dash, I have no idea if it is the right one.
View 4 Replies
I have a small problem with my 2011 Camry base model manual transmission. I replaced my rear view mirror and installed the EC homelink with compass rear view mirror as the replacement. I followed the instructions and it works fine but after connecting the battery again and turning the car on my check engine light stays on. I had the same problem when I installed my HID head light kit and I disconnected the battery and apparently it reseted the computer because the check engine light turned off, but I tried to disconnect and reconnect the battery twice now after installing the mirror and my check engine light is still on. How to reset it?
View 6 Replies
I parked my 2010 gti at work this morning, walked away, hit the lock button, and noticed a red light on the drivers door that flashed rapidly then kept on blinking steadily indefinitely. i never noticed that before! so... what is that? the alarm? this may be REALLY dumb, but I did not know this car had an alarm!
View 3 Replies
I recently changed the heater core on my 99 F-150 which meant i had to remove the dash. I got everything back together turned the key to start it and nothing it wouldn't start it wont even turn over. All the electronics come on like normal it just wont start. I have chased every wire every connection into madness. It has an aftermarket remote start someone said that would have bypassed the PATS but i dont know about that the theft light just started blinking.
View 1 Replies
I was driving home tonight and stopped at stop sign. I took off and truck died and coasted to a stop. I tried to start but all it does is theft light blinks really fast and will not turn motor over. I tried to reset pat by following procedure I found on internet. Still no start. I then unhooked battery cables and left off for 15 minutes then hooked up but still no start and blinking theft light. I also tried spare key and still no start. What else can I do. I had it towed to place that just bulletproof my truck. Truck has been running great. I did not want to leave it on the side off road in the middle of country all night.
View 3 Replies
I have a 2000 3.0 manual tranny, the motor went in the truck months ago. I put a new motor in it but that took me many months to do. Now I just finished up putting it all back together and now it wont turn over, when the ignition is on the theft light flashes fast. could there be a reset procedure at all? i had the battery disconnected for months.
View 2 Replies
Well last night on my way home after work (2:30 AM) I was on the turnpike and puff my car shut down and anti theft immobilizer light started blinking and the car won't start got it tow....
View 3 Replies
I have a 2000 Explorer Sport. Sometimes when I start it the "Theft" light stays on. If I kill the engine and restart the light goes out.
View 1 Replies
I have a 2000 ford excursion V10 . When I turn the key I get a rapid flashing theft light. No check engine light or engine light. I have check all my fuses in the vehicle unless there are hidden ones. My code reader and my tuner says no connection. They do power up but it just can not link. I did jump the relay for my pcm. Then my pats light does its check and shuts off then I get my check engine light comes on and does not shut off. I did get one code the P1000 code and the vehicle still will not start. As soon as I put my really back in the pcm it goes directly back to the way it was. So my thought is that my PCM is not powering on. What can cause this?
View 6 Replies
