Dodge - Ram - 1500 - Transmissions :: 2001 - Won't Shift Properly - Stuck In 2 - Sometime Still Into Neutral?
Feb 7, 2011
My name is Jason and I have a 2001 Dodge Ram 1500 with an automatic transmission. It has trouble shifting. I have to drop it down from D into 2 and then back into D to get it to shift out of second gear most of the time. If I have to stop ten times in a trip I have to manually shift it about seven or eight of those times. On top of that, sometimes while I'm driving it will slip into Neutral but it'll still be in the D position. This just started and has only happened a few times so far. My transmission fluid levels are fine. I'm trying to see if there is any other solution besides rebuilding or replacing my transmission.
View 2 Replies
Advertisement
The car is an '05 elantra, 97,000 miles, auto., car is new to me. First time on the freeway today, 30 miles @75-85 mph, at the end of the off ramp I could feel it surging, shift to neutral rpm's went to 1500, hoss the gas and back to normal. On the return trip off ramp, went to neutral, jab the gas, everything OK. I'm going to clean the throttle blade, check things, etc.
View 3 Replies
I have a 2004 Dodge Ram 1500, 5 speed manual with 110k miles. This past winter, the truck has started to whine when it's in reverse. The strange thing is that it also whines when it's in neutral and simply rolling backwards. It's intermittent, which is why I've been hesitant to take it to a shop to have them waste a bunch of time with it and say they can't reproduce it. Things that make it more likely to occur -- the truck being cold (IE: shortly after a start), air temperature being cold, when it's in 4WD. When I brake, it stops immediately. If I have the clutch on the floor or the transmission in neutral, it will keep doing it, as long as it's rolling backwards. This never happens in any forward gear, and it's been happening intermittently for a few months now. I had the transmission fluid changed this past fall, sometime before I noticed it started happening.
View 3 Replies
I recently, within last 2 weeks, started to have what feels like a "jerk" when my automatic Durango shifts. The "jerk" occurs when the car is cold (sporadic) and after the car is hot. When the car is hot it's a lot more noticeable and frequent. The durango has over 120K miles and the last transmission fluid flush it had, and the only one done, was about 99K.
I took it to my mechanic, he didn't do the transmission flush, and after a whole day of tests and diagnostics he says that the car has all the right timings and the only thing he could recommend is a transmission flush. He thinks the viscosity or correct viscosity could be causing this. My mechanic is fair and one of the better ones I've dealt with. In fact me didn't charge me at all for the work done.
View 11 Replies
My 2007 Dodge Grand Caravan with a 3.8L engine won't shift going up hill. On any incline, it stays in the gear it was in when the incline starts and will never upshift. So we're stuck going 20 to 25MPH up hill. Once we get to the crest of the hill, it shifts to the next gear and we're good to go. From a standing still on flat land, if I nail the accelerator pedal, it also won't shift, I have to back off the accelerator, and it will upshift normally. What's up with this?
Have engine light on and the code indicates a bad EGR valve, and possibly a bad catalytic converter, but Autozone indicated that a bad EGR can also produce a code for a bad catalytic converter. They recommended replacing the EGR valve first, then see if the code comes back. But they didn't know if this would cause a loss of torque, which might be related to the shifting problem.
View 1 Replies
My 2003 Dodge Dakota does not shift properly sometimes going into second gear and it only happens in second gear. I have to lift my foot off the accelerator for it to shift into third. If I don't it just screams at a high RPM and sounds as if it is about to blow. It has a hard time making it up a small incline such as an off ramp. Truck will not shift properly when going up grade. Engine will rev at 4500-5000 rpm but will not shift until I slightly release the gas pedal. Truck will also perform multiple hard up shifts whether in cruise control or not in cruise control, going upgrade. Took the truck to the dealer reprogrammed the computer with a "flash update" that was no luck. Not once has the ENGINE LIGHT ever come on.
So a lot of the comments that were presented to me I have done. Here is a list:
Changed govner senors and solenoid. Did not work.
Checked for exhaust leaks and other leaks. No leaks.
Checked all vaccuums. No problems there.
Had engine checked and dyno tested. No problems there.
Had transmission rebuilt. Same problem. (dealer did work)
Had new transmission put in. Same problem. (dealer did work)
Also, sometimes when I put the truck in reverse, it seems to about to stall, but it doesn't. It also does it sometimes when I put the truck in drive it seems that it wants to stall.
I just recently learned that my truck has a Transmission computer module, Transfer case computer module and of course the main computer. Is there a way to test those modules out?
View 3 Replies
I drive a 2006 Dodge Sprinter, 3500 with dual wheels. When changing from park to drive, the gears would not automatically shift from first to second gear. The engine kept revving, so I stopped the vehicle, and started it again. No problem. I spoke with a retired mechanic (friend of mine's father) and he said we should probably change the transmission fluid. When I called the dealer, he said they could do it but that he also saw problems arise when the fluid was changed on vehicles with high mileage (it has 225,000 miles on it).
Should I go ahead and change the fluid, or not?
View 9 Replies
I have recently been having problems with my 2013 Prius v (lowercase v for the Prius v wagon). When I press power, all the dashboard lights turn on. And when I try to shift the car into reverse or drive the car stays on neutral. What is going on?
View 7 Replies
I read a couple posts on Gear Shift switching back to neutral. Here is my situation. Got in the car to return some movies and realized I left them on the table. Went back to the house, and right before I turned into the driveway, noticed a metal coffee cup had come out of the holder and the edge was up under the accelerator. I had been applying my brakes to slow for the turn into the driveway, then when I went to accelerate, nothing, then noticed the cup.
Removed the cup and stepped on the gas to go into the driveway. Nothing. Turned the car off, then back on and tried to put into drive, goes a tiny bit then slips back into neutral. Tried it in reverse, same thing, pops back into neutral.
I can hold the shift lever in position and the car moves. It's in the driveway now and will get towed to the Toyota dealer tomorrow. Obviously a problem with the shifter as a result of the "coffee cup" under the edge of the accelerator. And yes, I know it's dangerous, hubby used the car last on his visit home this weekend and apparently the coffee cup either got put down on the floorboard or was knocked out. I bring it in the home when I'm done.....anyway.
So, the most likely cause was the spring talked about in other posts breaking, or a switch sticking or what. Seems like something got knocked or shifted out of adjustment. Does the accelerator have some type of cut off switch if something gets lodged under it?
View 11 Replies
Well, like the title says, The trans is stuck in third gear, with no other gears, or neutral or reverse. The car is slightly modified 02 GTI 337. APR Chip, Forge TIP, Full 3" exhaust, Greddy FMIC. I definitely drive the car, and had been beating up on it on the highway for a little on my way in to work, then on the way home, down shifted to pass someone, dropped it third, passed them, went to shift to fourth, Shifter moved, felt like it engaged "a gear" and then then i let off the clutch and it was still in third.
I also noticed that unless, I press the clutch in the, the car stays in this gear, even when the shifter is in neutral. I looked at the linkage, and it appears to be functioning. I did some reading around the Vortex and it seems like this might be a shift fork problem. Also, if the trans will be apart, what items should be upgraded?
View 10 Replies
Volvo Automatic 1992 240 - So, just started to back out of the garage and, all of a sudden, my gear shift got stuck in neutral and then started shifting without engaging the transmission at all. Pushed it back into the space and, taking a look underneath, I realize the control rod's completely detached from the lever in the transmission.
I can re-attach it, but it just comes loose again when I shift. It seems like something should be in there to hold the control rod in place with the transmission lever, but I don't know what because I can't seem to find any documentation on what everything should look like down there.
Attaching a couple shots, one with a circle around the area that's coming un-attached since the angle's a bit off.
Attached File(s)
IMG_8972.jpg ( 1.09MB )
IMG_8978.jpg ( 938.64K )
View 1 Replies
I have been driving a 2003 Chevrolet cavalier and the automatic shift is stuck and can only shift to neutral and drive since Thursday morning. It wont go up to reverse and parking and down to the other 3 shifts.
This first happened last April but somehow with the right grip or pressure was able to get back to all the other shifts. Since then it happened 2-3 times as I can remember and now could be getting worse.
View 1 Replies
It is a 2001 1.8T Golf, automatic. 75000 miles on it, mostly highway. I returned from my recent road trip, halfway across the country, which involved a couple of snow storms but otherwise everything ran smoothly.The day after I got back, I was going to dinner and the car wouldn't shift up out of 1st gear... unless I gunned it to almost 40 mph. Next time I started it, the check engine light turned on. I have driven it 3 miles, twice, since then and the problem remains. What the problem might be, if I'll need to replace transmission or just some fluid, or get a new car?
View 1 Replies
My girlfriend's 2001 cavalier has about 160k on it and about a week ago it started shifting harshly accelerating to highway speeds and the CEL came on along with the traction control/abs warning light. I pulled the OBD2 code and it was P0742, Torque Converter Clutch Circuit Stuck On. We took it to the transmission shop down the street the next day and they wanted $600 to diagnose. We called 'shenanigans' and decided she should take it to her regular shop. On the drive over the transmission shifted normally. Both shops noticed that the transmission cooler lines were rusty and seeping, but neither thought it was the cause of the problem. The shifting issue hasn't recurred even after a couple hundred miles during the week. She hasn't had the transmission fluid changed and doesn't know if it had been when she bought it about 80k miles ago. It seems to me that pre-emptively draining the fluid, changing the filter and refilling, especially to check for debris in the fluid, would make sense, especially if it was debris jamming the circuit that caused the error code in the first place.
View 8 Replies
So my truck battery has been giving me some issues due to the bad weather. So i jumped my truck today, and my odometer is stuck at 100 mph. What to do or dyi info. My heat is also not working, water pump is not leaking, and heater core is warmed up but I am not hearing the transfer from the cold to heat. could it be the blend door actuator.
View 1 Replies
I have an '01 Dodge Ram 1500 that will not go into reverse while the truck is running. The hydraulic clutch and transmission fluid levels are good.
View 1 Replies
I was backing out of the driveway a day ago and my gear got stuck in neutral,can not move the gear shifter and just don't know what to to do. This has never happened before.
View 9 Replies
My brother and father just finished with all of the small issues after throwing in both a "new" engine into the vehicle and a transmission..both have around 80K miles (chassis has around 180K). There were some issues with codes after both were installed, but then everything was diagnosed and fixed, vehicles codes were gone and vehicle was able to be registered, afterall.
Anyways, now the car threw a P0715 code and has issues with shifting. It appears that the Santa Fe is stuck in a single gear (appears to be a higher gear). The car won't shift properly, especially noticed at higher speeds in a main road. Using tiptronic does not seem to make a difference. After the car sits and is taken around the neighborhood, it seems to drive fine, until it is taken out into a main road...I'm guessing once it heats up?
So, what should be looked into? A sensor? Is it maybe because this "new" used trans was swapped in and all of the trans fluid was replaced with new fluid? What could the issue be? I guesss the car's been a headache but they're trying to get it finished to avoid any further codes/issues.
02' Santa Fe 2.7 FWD
View 3 Replies
I have an old base model 2001 Silverado, so manual everything. Here's my problem-- the air direction control knob (feet, defrost, face, etc.) is stuck on defrost. Literally stuck. Obviously, the knob attaches to and is supposed to turn a metal rod that then changes the direction of the air flow, but the rod will not turn at all...I even detached the knob and tried to turn it with a pliers! The climate control and fan speed knobs both work. What might be causing this?
View 6 Replies
My 2001 Buick Lasebre is not starting properly. I have to pump the gas several times before it will start; then when it is started at low speeds or idle it wants to stall. As long as I can some how keep pushing the gas peddle it wont stall. On the other hand when I am driving at higher speeds, anything above 40 or so it runs perfect. The check engine light was on and shows EGR valve stuck open. I have replaced the Mass airflow sensor, fuel filter, and the EGR valve. I had the code cleared and a short while later my check engine light came back on with the exact same reading. I bought this car only a week ago and was not expecting to have to fix a car I just bought and ran fine while test driving it. I have read may different forum that say that it could be anything from my fuel pump to vacuum hoses, to some other sensor.
View 19 Replies
I am trying to get some advice on a diagnosis for a transmission problem i'm experiencing with my vehicle? It's a manual transmission and the sound i am hearing is when i shift gears is a loud whirling grinding sound. It's really loud in 2nd 3rd and 5th and doesn't stop.
View 1 Replies
