I have a 63 dodge pickup with a habit of burning out ignition coils within 2 weeks. It's happened with the slant 6 motor, it's happened with the 318 v8 and its also happened with the current motor a 440. I have changed the ballast resistor, and the ignition switch, as well as the starter solenoid, and all related wiring.
View 4 RepliesMy Dodge 150 truck starts missing at about 45 mph. It seems to only do this after it has warmed up for about 20 minutes.
View 1 RepliesI have a '79 D100 that needs a new distributor. I've removed the two necessary bolts that I know of. I've tried to twist it, and will will barely turn. I've tried to pry it up. I've loosened a few bolts in the area to see if that relieved pressure. I've degreased the area and sprayed WD40 at the base of it and still nothing.
View 3 RepliesI have a 1984 dodge d150 ramcharger i just bought and it has all sorts of problems I am trying to fix as part of a learning process for me. One problem is it squeals when i first start it when i get on the gas. The faster the rpms the louder the squeal...
View 3 RepliesHaving trouble with my truck not charging. Changed out alternator, v/r and battery and still will not charge.
View 19 RepliesPurchased a new-to-us 1st gen dodge pickup, a 92 D150 v6. It's used once or twice a week at max and only has around 90k miles on it.
So a few months after we bought the truck, it stalled, or more like choked, out while driving on these country, hilly roads, at around 50 mph.. it happened once and we didn't think much of it. It happened again not too long after that, though, and we discovered we could push through the stall/choke by giving it a lot of gas.. it sounds terrible, and shakes and sputters, but eventually catches back and starts to run normal.
As months passed, the problem happened more often. So we changed the spark plugs and wires recently. No difference. In a given 40 minute trip along 45-55 mph country roads, the truck will choke and sputter at least 5 or 6 times. It's now so bad that sometimes giving it gas isn't enough to fix the issue and we have to pull over.
We've got an appt scheduled with a mechanic, Our friends think maybe it has to do with the choke plate or carburetor. It seems to happen more often if the AC is on, and other than this, the truck runs great. It starts up fast and idles fine.
I bought a dodge d150 a month ago. when i bought it, the lights work fine. one night i pulled out the headlight switch to turn the lights on, and the headlights came on, but no parking/running lights came on, and the back lighting didn't come on. if i sit there and jiggle the switch between off and where the original "notch" for the parking lights were, i can get them to come on intermittently. but they turn off as soon as i let go of the knob. all the other lights work, headlights, directional, hazards, reverse lights, cargo light...
View 4 Replies91 Dodge D150 1/2 ton truck with a 318 (5.2L). Approx. 135K miles. Noticed a leaking freeze plug right behind the starter. Removed the starter & replaced the offending plug. I've also replaced other plugs on the block as needed in the past. While I had the starter out, I went ahead and replaced it as it was getting old & tired. After buttoning everything up while adding coolant, I got a major waterfall coming out between the trans and the engine block.
My project for today is to remove the transmission so I can get to the rear plugs and replace. How many plugs are back there? I'm obviously changing all the plugs back there along with the rear main seal. Is there any advantage going with the brass plugs or should I just stick with the regular ones?
Had a couple bad freeze plugs that made my old 91 D150 with a 318 overheat severely. The truck is repaired but does smoke a little more than it used to at start-up and lasts a little longer. Also when stopped at traffic lights, It will belch a puff upon acceleration. Did the overheat affect oil condition and should I just go ahead and change it? Should I run some Marvel Mystery Oil through it before the change to maybe (hopefully) loosen up the piston rings? I know the valve guide seals are due for replacement but that's another project down the road. I've decided not to do anything with the fuel filter on the Camry...
View 1 Replies1990 Dodge Ram Van.... How hard is this to fix. Some Guys in Los Banos took two days to replace a fuel pump. End result, new pump not grounded so continually drains battery unless I mess with a fuse everytime I start/stop car.
View 2 RepliesMy truck started running a little rough so I replaced plugs, wires (looks like a rat may have nibbled them in places), cap and rotor. The truck idles smoother now but there had been kind of a lurching, almost as though it was bogging down then recovering prior to replacing the parts I have done. Now the issue seems worse, if anything. It seems to be either progressive. If I try to drive the truck like this, it's OK once it's going, though it still sort of hesitates periodically. Getting it going, however, is an exercise in frustration.
It's got virtually no power at all and isn't until it surges forward (recovering?) that it goes at all. I realize this may not be the best description but it's about all I can describe it as. The other oddity is it seems intermittent. Sometimes it'll run flawlessly after warming up, others it doesn't. Today, it ran perfectly for 30 to 40 seconds after first starting it to move between parking spots then it began while driving it. I'm concerned about driving as I don't want to cause damage to the engine and also, it's annoying a heck!
The truck's a 1989 Dodge D100 (not D150 as below; why no D100 option?) with the 318, AT and RWD only with about 225,000 miles on it. Historically, it runs without any issues whatsoever, starts instantly every time I ask it to (even now) and overall is great mechanically. (Ugly as heck but its' a truck!) The only issue I've had with it is recently, the coolant overflow hose came off right by the cap and, apparently, I lost enough coolant to overheat. I noticed the temp gauge registering hot and as I pulled over I got quite a cloud of steam.
It must have heated enough to hit the flash point, I guess. This happened on the freeway but I stopped IMMEDIATELY and it was fine once I put the hose back on and got coolant in it. The engine didn't stall or act up, make noises, etc. That was a month or so ago now. Aside from that and needing the brakes done recently (can't imagine that could be related but who knows) the truck hasn't showed any issues at all. Someone mentioned this could be the Idle Air Control motor but my reading suggests that'd only affect me at idle. Am I mistaken or is there something else I should be looking at?
What would cause me to have to replace several of the same ignition coils in less than two years time? It seems like it always happens after I purchase gas.
View 1 RepliesI have 2 spark plugs not firing. one of the three ignition coils does not fire, the other two do, is the most likely culprit be the ignition control module? car has the 3.8 motor.
View 4 RepliesI haven't had a check-engine light yet, but at idle, my 1996 Maxima has a sporadic misfire -- there's no rhythm to it at all. Does this sound like a symptom of a coil going bad? What would be a good way to test them without having to replace all 6 of them? The car has about 175,000 miles on it. I just put in a new set of NGK iridium plugs, and hope I didn't damage any wiring in the process (that doesn't seem likely, but I guess I can't eliminate that possibility).
View 16 RepliesMy husband's 2001 Buick LeSabre had an ignition module and one ignition coil replaced in March. Yesterday, the car broke down, and the mechanic told us that the new ignition coil shorted out the other two coils. Is this believable? We've been using the same mechanic for several years because we trusted him and have heard a lot of good things about him, but this seems kinda fishy. This car is not one of the GM cars that was recalled.
View 10 RepliesSo the previous owner of my V10 Ex had all the plugs changed and some of the coils needed to be changed at the same time.
Some have a yellow sticker on them. Some are plain black. The yellow ones say "Motorcraft" plainly on them.
The black ones look identical to the ones on my wife's Duratec 3.0L V6 in our Mazda MPV. They also have a Motorcraft part number on them.
I have 06 XLS with 56,000 miles and about 3 weeks ago the check engine and VSC lights came on. It was fixed, a ignition coil on the 4 cylinder.
Now driving home today the check engine and VSC lights are on again! I was wondering should try to get the dealer to replace all the remaining ignition coils ?
Plus I read their was some type of manufacturer defect on the original ignition coils from the factory. Why Toyota won't recognize this issue ?
Two ignition coils in a little over a month . My first Toyota and I'm rolling with the punches .
I have honda civic 2005 Lx with 170,000 miles. I noticed increased RPM about 1.5 with cold start but no missfire. I attempted to take out ignition coils to see if genuine ones solve the issue. It is very little rainy today with high humidity. After I put new ignition coils, I noticed increased shaking with misfire. I have not touched anything except for putting in/out coils. I ensured the position and connection of the coils. Is this anything with humidity? I did it really quick without much exposure to the rain. How to resolve this issue? at least return to previous condition?
View 7 RepliesI need to know what the resistance should be on my 2002 Echo's coils. I have an intermittent sputtering problem and it's driving me nuts! I put E3 spark plugs in the car about a year ago to improve the power and economy (it was on the original plugs at 160k miles!!) and they did work a lot but not long after that the sputtering problem started.
The car does have a code for the pre-converter O2 sensor but I replaced it, cleared the code and it keeps coming back. I have not pulled the codes recently but will in the next few days.
I've also read that the fuel filter is inside the gas tank but there is an access port under the back seat. I doubt that would cause the intermittent problem but I could be wrong.
I have a 2000 f150 with 198,000 miles. The lite on the dash came on, "service engine soon" , I had the codes read and they said the coils are going bad.
View 2 RepliesUpgrading ignition coils on 5.4's? Looking to upgrade mine and only came across a few and the reviews are mixed. I am primarily looking to smooth out the idle and gain some minimal power and maybe get a flicker of a gain in mpg.
View 3 Replies