I poured 2 ounces of power steering fluid into an automatic transmission. What a wake up when I saw gold instead of red dumping into the funnel. I then poured 14 ounces of ATF+4 into the transmission to top it off. It's been only 8,000 miles since the transmission was flushed. Should I flush now or is the power steering fluid compatible?
View 4 RepliesI was advised to replace my brake and power steering fluild at 40,000 by the Chrysler Dealer. Ever heard of this?
View 8 RepliesI had a mechanic replace my original engine 0f 120k with a 60k engine. Seems like I ran out of oil and warped my original engine and this was my only option. So as soon as I get the van back the transmission is dripping fluid and the mechanic said that some thing in the transmission went bad and must be replaced. This has nothing to do with replacing your engine. Can this be true?
View 7 Repliesmy daughter has a 2005 Chrysler minivan -- v 6 automatic -- the transmission will not lock in park -- it free wheels -- only stops moving when emergency break is applied --the wheels will move separately -- will not move the other wheel when in park -- if picked up one wheel -- and in park -- it still moves -- there is a gear that is rubbing the cover in back of transmission -- the upper gear iseems loose -- and wobbly -- is there a simple repair there
View 1 RepliesI recently picked up a 2003 chrysler town and country from a local GM dealer in central MN. After filling out the paperwork etc I was on my way home and the transmission made a loud CLUNK. I thought I must be imagining things. At the next intersection as I accelerated from the light "CLUNK". I called the dealer right away and they stood behind the van. The dealer had me bring it to the transmission shop covering all expenses. They fixed it, or so they said. We had it for a few days and had similar problems. Back to the transmission shop. They then completely went through the transmission. We got it back and again had issues... this time it was a slight shudder in the transmission as you slowly accelerated. I brought it back again. They replaced the torque convertor. I've only had it back for a few days and it still has an occasional slight shudder under slow acceleration... it usually happens around 30mph.
View 10 RepliesI have a 2005 Chrysler Town & Country base model with just over 70,000 miles.
My steering wheel/column "squeaks" when making left or right turns. The noise sounds like it is coming from inside the cabin, just behind the airbag/horn. It does not sound like a typical power steering problem. The sound is more noticeable when I make left turns and when I am driving slowly, like when I am turning the wheel of the car to get out of a parking space. The noise is definitely worse in colder weather.
I had the inner tie rods replaced three months ago, but I think the creaking sound pre-dates that work. Are there bearings or joints that might need lubrication. Something else?
When backing up in reverse I come to a stop and shift into drive. About 60% of the time it slams into gear (Drive). It feels as if someone rearended me. It's a 2012 Chrysler Town and Country with 40K miles. 2 dealers worked on it, reprogramed the computer and replaced 2 seloniods and the problem is still there. What is wrong but said thats typical on that 6 speed. What to do next?
View 2 Replies2002 Chrysler Town and Country. My speedometer jumps wildly and then goes clockwise and rest without working. The trany hesitates and has a jerking when sitting in drive, and slow to shift into 2nd gear. We have replaced speed sensors, wiring and connectors, and now are thinking the chassis control box may be next.
View 1 RepliesI have a 2003 T&C 3.6L with tow package, purchased used (privately) with 25K miles in 2006. Since I have owned it, it will occasionally not go into any gear when first started after sitting at least overnight- basically stays in neutral until engine is revved to about 2500 RPM. You can rev it in neutral or while it's in gear. This always works, and the transmission will then work fine until another overnight stay. I have had the transmission serviced 3-4 times (once when it first happened, and then at recommended intervals. The car now has 96K on it, and it has been happening less frequently (in fact, it hasn't occurred in about two weeks). I have discussed this with two Chrysler dealers, and have left it overnight twice, but of course it didn't repeat at the dealer. I haven't been able to correlate when it happens with anything except: it seems to occur more frequently when garaged in Pittsburgh than when sitting outside in Myrtle Beach (I spend time in both places).
View 3 RepliesHere's the scoop, was driving down the freeway the other day, car is a 2001 PT Cruiser going about 65-70 MPH when all the sudden it felt as if I had hit something, a loud bump sound which came from underneath the engine, then an immediate reduction in speed and acceleration. After that, I was trying to accelerate the car, the RPMs were revving like crazy but the car would not go more than 15 MPH, while the RPMs were revving and revving, almost as if I was in park.
Got the car to the side of the road, opened the hood and found that the top of the dipstick (transmission) had blown off and shot transmission fluid all over the engine. Unsure of why this happened but sure that was what the loud sound was before the drastic drop in acceleration.
After that I had the car towed to my house, now it will start, but not drive in reverse at all, i'm afraid to try driving it to inspect it further but that's pretty much where I am at right now. There's 117k miles on this car...
I have a 2006 town and country with a 3.3 and 220,000 miles.
Last week I was having some hard starts and loss of power on acceleration. My check engine light flashed during one episode so I had autozone check the code and it showed a misfire. I changed out my plugs and wires and that solved my issue. It started and ran like new.
Yesterday, I was running errands and my charging light came on. I was about ten miles from home and I decided to go for it. It was night so the headlights were on. Along the way, everything started to dim. Headlights, dash lights, airbag indicator came on and then the van just died. I walked the final mile and we towed it home.
The alternator and battery were both replaced last year in November making them both one year old. AC Delco battery 660 cca and I had a very reputable alternator shop rebuild the alternator.
So before I towed the van home, I hooked up some heavy duty jumper cables from a running chevy venture and let it charge 15 minutes. After the 15 minutes it was just clicks in rapid succession.
I hooked it up to a trickle charger overnight, 12v 2 amp setting. This morning, the van started, idled fine for about five seconds and then started trying to cut out. I kept it running by giving it gas but after about twenty seconds it stalled. I tried to restart and nothing but the rapid clicks. Three more hours on the trickle charger and the same exact thing happened. It started, began to stall, quit and then wouldn't restart.
I noticed today that the power steering reservoir was leaking a decent amount of fluid down onto everything around it including the coil pack. I replaced this today and used brake cleaner to clean all the surrounding components.
After doing some internet sleuthing, I found a thread with the same problem. For this guy, he had a disconnected ground from the negative battery terminal. I chased mine down (G101) disconnected and wire brushed it all clean. Put it all back together and still the same problem.
Here is what I have discovered:
Trying to jump it from another vehicle only results in the clicks. This is true whether the jumper cables on the dead battery are on both terminals or the negative is grounded on the motor. If the battery were the problem, I should be able to jump through it. If the alternator were the problem, I should be able to start with a jump.
After charging the battery, it will start once but then die soon after. Battery with the key off will read just under 12 volts (11.9, 11.6). With the key on, it will drop to the 8's (8.6, etc.) I have not yet had the battery or alternator bench tested. I plan to start with the battery in the morning.
It seems to me that the alternator wasn't charging the battery or it wouldn't have just killed the battery as those accessories should be powered by the alternator. It shouldn't be a starter issue since it will start after being on the trickle charger.
This weekend I am going to replace my old power steering fluid in my 2002 Kia Sedona mini van. Every where I look on line it tells me to use transmission fluid. Is this right? When they sell power steering fluid why would you use transmission fluid? Also, which type of transmission fluid to use?
View 13 RepliesI took my BMW 325i to a local shop to have it checked out. The biggest issues that they found with it were fluid problems. They claimed that both the transmission fluid and the power steering fluid were burned and needed to not only be replaced but also needed to be cleaned with a service that they would provide for a few hundred dollars. If I didn't they warned it could damage the transmission. They weren't lying about the fluid, its old and its dark and it smells burned. My question is how bad is having burned fluid? I've done some research and I know that the actual fluid is damaging and it seems as though just replacing it doesn't quite get rid of the problem. Is there any way I can run some sort of detergent through the transmission to clean out all the burned particles or is the shops information legitimate and buying their cleaning service really the way to go?
View 8 RepliesI have a Chrysler 2002 T & C. When the ignition is "on", everything works, but if the car starts, these accessories drop out and don't come back on for minutes at a time. The ignition switch has been replaced, but it still happens?????
View 3 RepliesAcross Internet is lot of examples of using pump, usually drill pump or vacuum. It seam to me that drill pump would work good for that job. Pump that attach to battery have limited amount of power and vacuum pump is manual. Look like a excellent device for transmission fluid change. Clearly no drain screw at pan. I do not think I'm fan of disconnecting return line and live empty tranny.
For example here : [URL] .....
My Town & Country 07 shudders (best word I can use to describe the sensation) between 40-42 MPH. First repair place convinced me I need tie rods, did not resolve problem. Next place said I need struts and new tires but the problem is not solved. Why the van would do this shudder, rumble, whatever - but only at 40? If I rapidly accelerate, like getting on the highway, it doesn't happen.
View 3 RepliesI have a 2006 Chryler Town & Country with the 3.8L engine. The car has 170K miles on it and I change the fluids/filters as recommended. I have never changed the plugs and wires though, or the fuel filter. The car starts and idles normally, and no issues driving in-town or on the highway.
Recently I have noticed a loss of power when I give it more gas and the transmission downshifts. The engine revs up but the power doesn't really increase and it makes a low growling kind of sound. The engine also starts to hesitate at around 3000 RPM if I rev it in neutral. I am thinking it could be the plugs/wires, fuel filter or air filter (even though the air filter is less was installed at 163K miles.
When I had 67 miles on my 2013 Chrysler T&C Van it stalled and would not immediately restart. The Electronic Vehicle Information Center revealed both the coolant and engine oil temp was in excess of 300 degrees. After 15 minutes the temps were between 280 and 285. The engine started and I drove slowly the3 miles to my house and had it towed to the dealership the next day. Mechanic found the quick connect coolant line to 3rd seat heater was improperly installed at factory allowing 1 gallon plus of coolant to escape.
A mechanical engineer and a Chrysler mech ( not one from the dealership) advises it is just a matter of time until I have internal engine damage. Chrysler Owner Assistance Dept assigned a case mgr. She reported the van was repaired and operating properly because the coolant line was repaired. Their first offer was 1 months loan payment, which I refused.
I have a 2001 Chrysler Town and Country w/ 3.8L engine and 196,000 miles. Several years ago the transmission was rebuilt. Since then the speedometer was off 1-2 mph at 65 mph. I recently bought new tires and now the speedometer is off 2-3 mph at 65 mph. My question is: How do you calibrate the speedometer? I know all about the reset for a bouncing/stuck needle. That does not calibrate the scale. I've read about gear replacement and found the Hyper-Tech calibration programmer (which is not available for the 2001 T&C).
View 5 RepliesMy 2008 Chrysler Town & Country has, since it was 2 mos. old, had a "no-start" problem. This is not a stalling problem. It happens when the car is off and I try to turn it on. The problem is very sporadic (sometimes several times a day - I do lots of short drives - sometimes several times over the course of a few weeks, then no problems for months). When I turn the key in the ignition, all electrical components come on (dashboard lights, air, radio, etc.) but nothing happens with the engine (it does not make a sound). The dealer has replaced a computer component, the battery, the starter, the electronic keys but the problem always happens again (within a few days of it the "repair"). I usually have to turn the key 3-12 times (sometimes I take it out of the ignition, sometimes I pray!) and eventually the engine starts. Because the problem is sporadic, the dealer has not been able to replicate the problem (though they have, at times, had it for a week or more and even driven it as if it were their own, home at night, to work, to run errands). Although the car eventually starts, it is very problematic when I have to be somewhere and it takes 10 minutes (not to mention a lot of worrying) to get it started.
View 3 RepliesThis car has 145K and transmission was replaced 3 years ago with used one that had 75K at 105K. Since replacement 3 yrs ago it runs great in the winter, when cold and no humidity, and runs extremely bad when it is warm and humid. This summer was hot with no humidity (in Kansas) and ran great. Now with fall and humidity back it is acting up again. The rpm's will show a jump up and down (300-500 rpm) while driving at 55mph or slower and do the same while at a stop light. At 70-75 the rpm's do not change but you can sure feel it at 55mph not looking at the rpm's move. The dealership has put it on the computer and it shows nothing. It clunks and thuds when driving slowly and sounds hard on the vehicle.
View 5 Replies