I had a mechanic replace my original engine 0f 120k with a 60k engine. Seems like I ran out of oil and warped my original engine and this was my only option. So as soon as I get the van back the transmission is dripping fluid and the mechanic said that some thing in the transmission went bad and must be replaced. This has nothing to do with replacing your engine. Can this be true?
View 7 RepliesI poured 2 ounces of power steering fluid into an automatic transmission. What a wake up when I saw gold instead of red dumping into the funnel. I then poured 14 ounces of ATF+4 into the transmission to top it off. It's been only 8,000 miles since the transmission was flushed. Should I flush now or is the power steering fluid compatible?
View 4 RepliesI have a 2003 T&C 3.6L with tow package, purchased used (privately) with 25K miles in 2006. Since I have owned it, it will occasionally not go into any gear when first started after sitting at least overnight- basically stays in neutral until engine is revved to about 2500 RPM. You can rev it in neutral or while it's in gear. This always works, and the transmission will then work fine until another overnight stay. I have had the transmission serviced 3-4 times (once when it first happened, and then at recommended intervals. The car now has 96K on it, and it has been happening less frequently (in fact, it hasn't occurred in about two weeks). I have discussed this with two Chrysler dealers, and have left it overnight twice, but of course it didn't repeat at the dealer. I haven't been able to correlate when it happens with anything except: it seems to occur more frequently when garaged in Pittsburgh than when sitting outside in Myrtle Beach (I spend time in both places).
View 3 RepliesMy wife's town and country had its serpentine belt replaced. Now it won't go past second gear and is running 3.5 rpms at 40 mph. What do I do?
View 3 RepliesI was advised to replace my brake and power steering fluild at 40,000 by the Chrysler Dealer. Ever heard of this?
View 8 RepliesHere's the scoop, was driving down the freeway the other day, car is a 2001 PT Cruiser going about 65-70 MPH when all the sudden it felt as if I had hit something, a loud bump sound which came from underneath the engine, then an immediate reduction in speed and acceleration. After that, I was trying to accelerate the car, the RPMs were revving like crazy but the car would not go more than 15 MPH, while the RPMs were revving and revving, almost as if I was in park.
Got the car to the side of the road, opened the hood and found that the top of the dipstick (transmission) had blown off and shot transmission fluid all over the engine. Unsure of why this happened but sure that was what the loud sound was before the drastic drop in acceleration.
After that I had the car towed to my house, now it will start, but not drive in reverse at all, i'm afraid to try driving it to inspect it further but that's pretty much where I am at right now. There's 117k miles on this car...
my daughter has a 2005 Chrysler minivan -- v 6 automatic -- the transmission will not lock in park -- it free wheels -- only stops moving when emergency break is applied --the wheels will move separately -- will not move the other wheel when in park -- if picked up one wheel -- and in park -- it still moves -- there is a gear that is rubbing the cover in back of transmission -- the upper gear iseems loose -- and wobbly -- is there a simple repair there
View 1 RepliesI recently picked up a 2003 chrysler town and country from a local GM dealer in central MN. After filling out the paperwork etc I was on my way home and the transmission made a loud CLUNK. I thought I must be imagining things. At the next intersection as I accelerated from the light "CLUNK". I called the dealer right away and they stood behind the van. The dealer had me bring it to the transmission shop covering all expenses. They fixed it, or so they said. We had it for a few days and had similar problems. Back to the transmission shop. They then completely went through the transmission. We got it back and again had issues... this time it was a slight shudder in the transmission as you slowly accelerated. I brought it back again. They replaced the torque convertor. I've only had it back for a few days and it still has an occasional slight shudder under slow acceleration... it usually happens around 30mph.
View 10 RepliesWhen backing up in reverse I come to a stop and shift into drive. About 60% of the time it slams into gear (Drive). It feels as if someone rearended me. It's a 2012 Chrysler Town and Country with 40K miles. 2 dealers worked on it, reprogramed the computer and replaced 2 seloniods and the problem is still there. What is wrong but said thats typical on that 6 speed. What to do next?
View 2 Replies2002 Chrysler Town and Country. My speedometer jumps wildly and then goes clockwise and rest without working. The trany hesitates and has a jerking when sitting in drive, and slow to shift into 2nd gear. We have replaced speed sensors, wiring and connectors, and now are thinking the chassis control box may be next.
View 1 RepliesI have a 2007 Chrysler T & C minivan. The engine cuts off while driving. Most frequently while turning (to the right!). My mechanic found a loose battery terminal. Nope. Next he suspected the ignition switch which has been a problem with other model years. Nope. Now he wants to try the cam shaft? What could cause it to just die during a right turn? and very frequently.
View 3 RepliesWe have had an engine light that comes on when it is wet out. (Usually from rain) Until recently, the codes were not stored in memory. The last time we tried this, there was a 420 code set. Our mechanic said it was the catalytic converter. This vehicle is a 2006 and only has a 100,000 miles on it. Neither of the oxygen sensors have been replaced. The car doesn't seem to run any differently when the engine light comes on.
View 10 RepliesThe oil light on my 2005 Chryler Town & Country comes on when started when it is cold outside. It stays on until I turn the key off and restart, then it goes out and does not come back on. My mechanic cannot find anything wrong. This only happens in cold weather, not in the summer.
View 10 RepliesI don't know that much about cars, the fan that turns on to cool the engine when you're driving won't turn off when I turn off the van. Before I knew what was going on it was killing my battery over and over again and I kept getting jumps, finally took it to Sears and bought a new battery. Later that day I came back to the van, about a half hour after turning it off, and realized the fan was still on. There was nothing I could do to get it to stop, Finally it killed the battery once again and I called AAA. The triple A guy who came showed me how to pull out the fuse under the hood with needle nose pliers to stop it.
I had to drive it to Maine to visit my father and while there took it to his mechanics but of course when I pulled into their parking lot the engine fan turned off when I turned off the car. There were a few other repairs to be done, the air conditioner wasn't working and the interior lights weren't turning on, but during the week they had it the engine fan never did that weird thing for them. But when I picked it up two days ago, after driving it around town for a day and having it work fine, I took it on an hour and a half drive and once again the engine fan wouldn't turn off. Should I resign myself to driving around with a pair of needle nose pliers in my glove compartment for the rest of the life of this van??
BTW, I've only owned this van for a few months. The problem started after I had taken it to a garage in New Jersey where I now live to have the air conditioner worked on. The said it had no freon but couldn't find a leak so filled it with freon with a dye in it. They also said I needed to have my front wheels aligned and did that for me.
I have an E-350 with auto trans and 460 engine. I am away from home and hope to make it back where I have tools to do the major work. I drove up a very steep hill and the trans fluid leaked at the steep part, but only when pointed uphill. I did it a 2nd time and it only leaked at the steep part (I was not aware of this the first time or I would not have done it again). Fluid was dripping out pretty good at the bell of trans. No leaks when in drive or R when engine running and level.
I added fluid and tried to back uphill to get van out of this place and it worked fine for a min, but now just rolls downhill. My question is can I just add fluid and get home? What the leak is? How long I can drive it, or if it will leak too much? When I get home (150 miles) I can do any repair needed, Im just trying to get home now.
I know we will be guessing a lot. Van is a 1995 Ford Cube Van, formerly a Ryder moving van. E-350 with the 460 engine, and 3 speed OD trans. I don't know any more detail on the trans. It should be heavy duty given it was a moving van. Van is probably 10-12,000lbs.
my 1997 town and country van with the 3.8 liter engine keeps stalling at unpredictable times. sometimes when it is cold first thing in the morning, other times when fully warmed up at a stop light and sometimes on the interstate at 70 mph. The tach drops to zero, the speedometer drops to zero, the check engine light blinks on and then back off, the computer doesn't record any error codes. it causes the cruise control to drop out while on the hiway. the engine always starts right back up, for how long, its unpredictable. Mechanics have replaced the three engine sensors twice, checked and cleaned wiring contacts at sensors and engine computer. And also the Knock sensor has already been disconnected per a chrysler bulletin. At highway speeds the engine usually bucks and then keeps running, but sometimes dies.
View 2 RepliesI am the 2nd owner of a 2001 Chrysler Town and Country Minivan Limited. The vehicle is in very good shape and I service it every three months and have the tires rotated every six months.
Just recently I have been having a problem with it not wanting to start. I have had a bit of a squeal coming from the engine compartment and know it is the serpentine belt that needs to be changed out before it gets bad (I have only heard the squeal probably three times since December 2012.)
I would rather buy my parts and have the mechanic put them on instead of him buying them and charging me double.
My question is...do you think it is only my belt or should I think in the direction of the Starter or something else. After about threee or four tries it will finally start.
I have a 2003 Chrysler Town & Country and the check engine light is on. I brought the van to my mechanic and he told me there was a code that told him there was a misfire on cylinder #1. He started out with replacing the wire to cylinder #1, no change. He replaced the spark plug, no change. He installed a new fuel injector, no change. The van runs a little ruff at idle and when at a stop light.
View 9 Replies2007 Chrysler Town & Country with 74K. The check engine light comes on and the parts store diagnostic says P0404, a clogged EGR valve. On my model, replacing the EGR valve involves taking out the alternator, which involves removing the passenger wheel. That's beyond my skill set.
So, can I just replace the EGR tube and pour some Sea Foam motor treatment directly into the EGR? Would that hurt anything?
I have recently replaced the clutch, clutch master cylinder, clutch slave cylinder, Strut tower mounts and brakes on my 2002 Hyundai Elantra 5 speed. Everything is working properly but now I have a transmission fluid leak. I can not locate the exact location. It appears that it is dripping down onto the passenger side half axle where it connects at the transmission.
View 2 RepliesYesterday afternoon the "Service Engine Soon" light turned on in our '97 Town & Country (3.8L engine). A few minutes later (while I headed to Autozone to get the code read) the light went out. They were still able to retrieve 2 codes: P0700 and P1775. Internet searches suggest a possible bad solenoid pack for the transmission.
More background: The van has 161,000 miles, and the original owners got the transmission replaced at 40,000 miles under warranty (4 speed automatic). The transmission fluid was replaced (pan drop method) at about 153,000 miles and at 112,000 miles, etc., with Chrysler ATF +4 fluid. The van got new plugs and wires about 15,000 miles ago. (It also got a new radiator and hoses yesterday morning which I think is unrelated.) Another possible clue: On long trips sometimes the 2nd transmission shift will become slightly rough but it still shifts and after it has rested everything returns to normal. This occasional shifting issue has been going on for over 5 years and again when it manifests itself it is very slight.