Chevrolet - Blazer :: Knocking Noise - Oil Pressure Drop From 40 To 10
Jun 27, 2012
1997 chevy balzer 4.3 6cyc. Oil pressure drop from 40 to 10 and making a knocking sound no loss in power. About 3 weeks ago had oil change and new oil lines and gaskets put on because i had some leaks no noise or problems then just was losing oil then this happened first of all does this sound like a main bearing gave away second should i go back to where i had this work done and complain could they have done something to cause this they are very good and honest mechanics and a reliable auto repair mechanic company the blazer has 180,000 miles or do you think it just because of the mileage it was bound to happen i hate to blame something on someone if was just a coincidence but does this sound like the main bearing?
View 1 Replies
Advertisement
2000 Blazer 4wd, automatic, 122000 miles
In the last couple of weeks, if the Blazer isn't driven for 3 or more days, there is a slight knocking noise for 15 to 20 seconds after start up. Oil level and pressure are fine. I'm guessing it's the lifters.....
View 13 Replies
I have a 1999 Chevy Blazer LS 4WD 95K miles that had an incident in 2008 where the oil pressure dropped to zero while driving down the highway. I immediately pulled over and had the vehicle towed to a dealership. They pulled the oil pan off and let me know the lower part of the motor was "toast." (crankshaft had turned blue due to heat from no oil.) Mysteriously it has oil pressure now, why that is. It started last time I tried about 4 years ago.
I dearly loved this vehicle. It was first car I bought and paid for myself and I planned on repairing it one day. It's been sitting in My garage for the last 8 years. Recently, my daily driver died and I was faced with repairing the Blazer or buying a new vehicle. Since I don't know how well the Blazer has fared sitting in the garage all these years, I decided repair wasn't worth it at this time for a vehicle I needed to be dependable and I just bought a new vehicle.
So here's the thing. I kept the Blazer really clean. Washed it all the time, no damage, Regular oil changes, the works. It still smells like a new car inside. I really don't want to see it get crushed and I'd like to see it go to a good home. It might need more work than a new motor since it's been sitting so long, but I can't imagine it would be more than someone mechanically inclined could handle. I'd get a new engine, but I don't have the cash and I need the garage space.
View 17 Replies
1998 chevy vortec 350. replaced fuel pump(twice),fuel filter, blew air through the lines, replaced fuel pressure regulator. Getting correct voltage at pump. pump runs. still only get 30 lbs of pressure. Need 60. Thought I bought a defective pump took it back. Same result. Doesnt leak anywhere I can find. Pressure doesn't drop. Just plain don't get the 60 lbs it requires. New battery as well and new F.P. relay.
View 6 Replies
I have a 1993 Chevy C1500, and about 3 weeks ago I started noticing that whenever it gets to temp I start hearing a knocking coming from the valves, and I lose almost all oil pressure. I also lose a lot of power. What could be causing this? Am I looking at a full on engine rebuild?
View 3 Replies
My 1976 Chevy Blazer K5, runs and drives excellent. But when I take it up into the mountains 4 wheeling, there is a problem. Any time that one or the other of the front tires goes up on a hill and there is any twist to the frame, I get this constant grinding noise. If I stop and put it in park, it still grinds and wont stop until the front tires on the same plane. What could this be?
View 1 Replies
My 4WD light does not come on but the warning light to service it does which leads me to believe the 2WD is not engaged. I have a 2001 Chevy Blazer. Also the seems to be a "rubbing" noise emanating from the right from while driving.
View 1 Replies
I "think" I may have a bad wheel bearing. Problem is, which one is it? The code reader I own does not read for ABS. The noise appears around 30 mph. It increased slightly, at higher speeds. I tried jacking each side of the truck up and checking for play and noise. There is no play. The only thing I can say is that the passenger side wheel seems heavy to spin. But spins.
The drivers side wheel spins slightly more free, but has a faint sound like the brake shoe is touching the rotor. I drove it and tried turning left and right. The noise does not seem to get worse or better when turning either direction. I called my local Auto Zone, and they only told me to do what I have already done. So I am at a loss. What else can I do? My Blazer is a 2000, 4X4, Automatic.
View 12 Replies
Think i have an exhaust leak in a 1999 s10 blazer lt 4x4 4 door. the loudest spot where i can hear the exhaust noise at cold start and idle, is the passenger side right behind the front tire. on cold mornings where you can see the exhaust smoke prior to warming up i cannot see anything coming from this area. non mechanic types have suggested either the y pipe, or where the y pipe meets the header. Would both have to be replaced to fix this problem if this is the case? and how intensive is this to fix? meaning would the whole motor have to be pulled to remove the entire exhaust piping to have it brazed? my dad is a mechanic, so the tools I've got and his know-how, just need to know what to do? Any definitive way to tell where an exhaust leak is, beyond having a friend cup their hand over the tail pipe, while they look for it..
View 3 Replies
Immediately after I had four new tires installed on a 2000 Blazer 4wd, the front wheel bearings started making noise. At the time I thought the noise was from the new tires. A few thousand miles later my mechanic told me I needed two reman hub assemblies (sealed bearings) for ~$350 apiece plus labor.
Is there anything that the tire shop (independent not chain) could have done (accidentally or otherwise) to damage the bearings during the tire installation? I have to get 4 tires for my 93 Chevrolet Caprice and don't wish to repeat the experience.
Whoops, forgot to mention this happened at 56k miles when the truck was five years old. Is it possible that the bearings were borderline and the process of mounting the wheels put them over the edge? For instance, someone being a little over enthusiastic with an impact wrench.
View 4 Replies
Auto facts: 2000 Blazer, Mileage: 196,000 Engine: V6, 4.3L Transmission: Automatic Drivetrain: 4WD, Single climate control
Recently had my AC compressor assembly replaced, renewed accumulator/receiver drier, orifice tube, recharge, etc. The AC was cooling well below par after the repairs. Then is started alternately blowing hot (12 sec), cool (3 sec), etc. with a "spooky" creaking noise coming from within the middle dash during each transition (blend door?).
The mechanic charged the system again and agrees there is a refrigerant leak "somewhere" to account for the marginal cooling capability but the dye put into the system before the repair is not showing up anywhere that he can see (so far, having it checked again today). So, are these 2 separate issues? What are the steps of diagnosis and repair possibilities?
View 1 Replies
My belt was making a screaming squeaky noise to wake up the dead. I used dish soap on it and it got quiet as long as I remember to bring the dish soap. My mechanic looked at my AC and told me I need a new compressor (he is a friend I trust) Now the AC comp turns but the belt seems to go on and off. And, the weird thing is-the AC feels great! Am I to expect any moment for it to just stop working? So, what to expect from my dead or dying compressor?
View 18 Replies
2012 F150 6.2L V8... I am at a loss and I know that loud knocking is not a good sign. Two days ago my truck's low oil pressure light started coming on and off, so I pulled over and immediately turned my truck off. I called a friend at a Ford dealership and he asked a mechanic what I should do. He said it could be something as simple as low oil, bad oil sending unit or maybe something serious. So, he said check my oil level if low top it off and see if that fixes the problem. It was low and I topped it off, but the light kept doing the same thing.
Here's my dilemma; my truck wasn't making ANY noises (knocking, whining, etc...), 2 days later which was yesterday I was en route to get new oil/oil filter changed and 24 miles later I'm in a turning Lane and it dies! Will not start, but it tried, so I did not try anymore. I was able to get it into a parking lot and left it for about 4 hours and went to check on it and it started right up and that is when the knocking noise started. I turned it off and checked the oil and the level reads full...
View 14 Replies
1993 chevy silverardo ... There is a knocking noise coming from passenger side dash i turn the key on it starts tell maybe i get down the road, when i turn the truck off it knock for like 25 secs. I just got the truck didn't find out until I took it home.
View 8 Replies
While driving today, 2006 Ford F-250 5.4 L V8 138,000 miles , I experienced a problem. Started with the truck acting as if it was running rough, possibly missing. This was approx. 10 Minutes after starting. Checked the dash, no warning indicators and all gauges were normal. Approx. 4 more miles, the oil pressure alarm signals and I see the oil gauge has dropped to zero. I pull over, turn off and check the oil. Oil is clean and at a normal level. I restart the truck and the oil pressure goes back to normal.
Rev the truck up while sitting there and after a few seconds i hear a knocking noise in the engine and oil pressure drops again. Call the tow truck, driver used to be a mechanic . He asks me to start it again and the same thing happens. If you start it and let it idle oil pressure seems to go up to normal with no engine noise. Finally get to the mechanic and he calls me later saying the oil pump and screen may need to be replaced or the engine may need to be replaced.
View 3 Replies
Been doing a lot of repair's on our 1994 Chevy blazer. It's a 4.3 v6. We finally got her running and now it seems like it can't take high speeds for very long without over heating and eventually smoking some. Had to bypass heater core, it's clogged. That worked with temp. Also replaced radiator and cap. Replaced both heads, took thermostat out. That worked with temp too. It has a new water pump, new exhaust manifolds, has good spark plugs, oil changed and oil filter. Kind of at a loss.
View 16 Replies
The Headlights on my 2001 Chevy Blazer will come on by themselves. The Headlight switch is in the off position. It will Switch between the daytime running lights and nighttime lights. What Is causing This?
View 2 Replies
Our 2000 blazer LT 4.3L 4 door 4wd has 190,000 km (about 115,000 miles). 3 Button dash control. Transmission was rebuilt at 100,000 miles (main troque converter spline was shot). The 4 wd will not engage in either hi or lo.
Whether moving or not, press 4 wd lo, light stays on. but nothing happens. I cannot hear the transfer case engaging.
Had a previous problem, (withflashing light): found the vacuum hose under battery case was worn through.
I do have a service engine light on the dash. This may be unrelated, because 4wd stopped working long before service engine light came on. I have changed the Oxygen sensor, but no reset the fault yet. Where to start.
View 13 Replies
2002 Chev trailblazer, I have had the throttle body cleaned.... Sometimes after short stops, my vehicle will not crank, some times I have to step on the gas several times and it will finally crank, it sets no codes, no check engine lights come on. If it sits overnight, or for more than 20 minutes it cranks right up.
View 3 Replies
Why will the 96 Blazer not start in the rain? Replaced almost all electric components from key cylinder to plugs. It is grounded somewhere when wet.
View 3 Replies
I got my blazer look at and here what they come up with so far. Transmission fluid is discolored. Transmission shifts late between 3rd and 4th at 52 mph. Transmission slips between 2nd and 3rd gears at 32 mph. Lock up 41-43 mph in and out. I never told them this but I change the transmission fluid about a week before i took it there and when I check the fluid it was nice and clean and not burned like he said it was. He said most likely it internal damage.for them to take a look in side to see what is wrong with cost me 400.00 and I said no.
View 6 Replies
