So I know what brakes sound like when they're due for replacement...this is a different noise. It's more of a creaking noise, and I'm not sure if it's my brake lines or if I need brake fluid? How often should one change/replace brake fluid in a vehicle?
View 5 RepliesAfter replacing my brake pads and shoes I am hearing a squealing noise coming from the area near my brake pedal. This noise sometimes becomes high pitched if I depress the brake too hard. I am also losing a little bit of brake fluid if I depress the pedal hard several times. The brakes themselves function fine and have no problem stopping. When I bled the brakes today some of the fluid was black. I figured it might be air in the system but after bleeding them it is still happening. I also replaced the bleeder screws.
1997 Pontiac Sunfire 2.4L uses DOT 3 brake fluid.
The turn signal noise in the hazard light terminal will not shut off. Should the terminal be replaced or is it some other electrical issue? 2002 Grand Am
View 4 RepliesI'm getting this clicking noise in the front drivers side of my car... it sounds like its related to the wheel because it's clicking in a rotation pattern, i.e. it slows down as I slow down, etc. The clicking noise dulls/goes away whenever I brake. Not sure if that means it's related to the brakes...or if it's something else.
View 2 RepliesI know the whining is coming from the steering pump. Does that mean its going out? the wheels and the steering turn fine... not hard to turn or anything. My daughter is getting this car tomorrow. and i want to make sure nothing is really wrong with the car. it has been sitting outside under deck for over 1 year. i had to pump up the tires, other then that... she started right over no prob. never had the whine before... Looked in the resevoir and looks fine... a little over 1/2 full.
View 3 RepliesThe noise is more like a creaking noise than a metal on metal grinding noise. I just wanted to add, that I have this same problem with my 13' GT....I brought it into the dealer about 2 weeks ago. They drove it with me, he heard the noise and said...not sure...sounds normal. I said that is NOT a normal sound for breaks to making on a new car with 7500 miles on it. They brought it in, ended up "scuffing" the rotors up and said nothing else they could do.
That worked for about 10 days, but the noise it back again! I am glad I found this thread, i will be calling them today....They called me back and said i can drop it off next week for the day and they will give me a loaner for the day. I told them that the noise is NOT normal and not acceptable, especially on such a new car...
I have 2006 Pontiac Torrent AWD with front disc and rear drum brakes. My ABS & traction control lights come on together (sometime) when I hit brakes slowly to slow down my car around 20-30km/h with a grumbling/scraping feeling sent to my feet from brake pedal (feel like rumble strip on highway). ABS & T/C lights go away if I shut off engine and restart car. It also happens if I accelerate at that speed. This issue does not happen when I hit brake hard.
View 11 RepliesLast night when I was driving home, I noticed that all of my "night lights" were off. The lights on the speedometer, gas gauge, gear shift, etc. did not seem to be working, but all of my system warning lights (Traction, Brake, etc) seemed to be fine. I tried to turn the car on and off a few times and also tried fiddling with the lights manually. Nothing seemed to be working.
View 4 RepliesI have a 2000 grand am Gt with 3400 motor it started up just fine went to turn around in the drive way the dash lights came on where the ABS sensor is bad, but if u shut it off and started it back up they would go out so i shut it down and went to start it back up and all it does is click, so i thought it was the starter and replaced it, still only clicks. I called GM dealership they said more then likely it is the plastic piece the ignition switch goes in to so i just replaced it and does the same thing.
View 8 RepliesThis is on a 2004 Pontiac Grand AM.
The old GM ABS light problem. The lights were on a month ago and the left front hub was replaced, the light went out. They just came back on all of a sudden (coincided with the temperature dropping to 15F). The next day they were out. Then the next day they came back on. I couldn't get a code read with the basic scan tool.
Where should I start? I'm thinking of cleaning the speed sensor connectors and reseating with dialectic grease. Maybe they're dirty or a bit brittle due to age and the cold?
I know- another noise diagnosis thread but I'm very confused and worried about these noises coming from the front of my car. It's a creaking noise that's most noticeable when I engaged the brakes. I first assumed it was an engine mount- hopefully it is. I'm replacing my vf dogbone bushings before Tod. But this doesn't sound like rubber creaking, by metal. Like the chassis by the strut mounts. I hope it's nothing regarding the v3's. Maybe it's something with the brakes? I also hear I slightly when going over speed bumps. Again, I doesn't sound like the rubbery rear sway creaking. What could be the cause? I'm replacing the pads and fluid before Tod as well..
View 22 RepliesI have a 2004 Pontiac Grand Am with about 130k miles on it. For some reason my car has been dying lately. It did this a few times so the obvious thing was to buy a new battery- oct 2011. Everything was good for a couple months but I recently went on a trip for the weekend and when I came home the car was dead. I jumped it and everything was good until this week. I had a work conference and left wednesday at 8am. When I got home Friday at 5pm the car was dead again. I had an alternator test done before but could it be the alternator? I love my little car and would like to get a couple more years out of her!!!
View 7 RepliesHave a 2004 Grand am that was having some problems starting:
1) The last 10 times it would start cold, but it would take about 5-10 seconds of turnover before actually starting.
2) After it started, it would start fine the rest of the day.
Now it will not start at all. Today is the coldest day of the year so far... 43 degrees. It tries to turn over. The security light came on once, but did not come on again (i know that's a common problem). (note: I have not seen it in person, but will later today). Either fuel or spark.
My thought: either fuel pump, fuel pump relay, sensor, wires/plugs, etc.
I have a 2004 Pontiac Grand Am with a 3.4L engine. When I start my car after it has been sitting for a while, especially in the morning, the engine shutters making the car shake when it is put into Reverse and Drive. Plus a horrible gas smell come from the hood and into the heating vents. So to alleviate the shaking I let the car run for several minutes which in turn makes the gas smell worse. The smell continues to get worse when the car is stopped at a alight or stop sign. to eventually go away as the car heats up. The check engine light blinks with the shaking then disappears but eventually stayed on with a cylinder misfire code. I took it to a shop who told me that was the head gaskets.
View 2 RepliesI just got a 96 Grand Am for second vehicle, but it won't blow any air (hot or cold), I checked fuses they all look good. I'm thinking possibly blower motor, but wanted to get some feedback before I start plugging away.
View 5 RepliesSo, a couple weeks ago, while driving down the highway, my '99 Grand Am had the oil lamp come on, and the engine was running rough. I pulled over and stopped the car, and then went to try to start it, to no avail. The engine wouldn't crank. After getting it home via tow truck, I charged the battery as first aid.Now, with the charged battery, the engine will start, and run very roughly, as in shaking the entire engine bay. Further, the oil lamp is on now. After a minute of running like this, the engine dies off. Stepping on the gas expedites the stalling out. I've checked and filled the oil, and the coolant (which was low). My next guesses are fuel filter and timing belt.
View 9 Replies2001 Grand Am, 120,000 miles. Struggles to starts, when it does turn over it is only for 1-2 seconds and then cuts out. Even if I get it plenty of gas it still cuts out only it revs and then cuts out. It worked fine on Thursday and sat on the drive until this morning. If it makes a difference, we've had lots of rain recently and the remote keyless entry stopped working too.
View 3 RepliesMy 96 Grand Am 3.1 it the SE model. ABS Light is staying on I check all the fuses all are good I check the wires going to the wheels with a ohm meter get a reading of 117 ohms driver side and 110 ohms right side . Need to know if the reading are in specs or not if I need to replace the ABS unit just the control unit (the black box ) or the whole unit that mount on the master cly ? the car has no tags right now so I can't take it to be scan.
View 12 RepliesMy 2001 Pontiac Grand Am gt won't start. Turning the key gets no crank. Also there is no power that seems to be in the car at all. Nothing on instrument panel. Battery is good and all Ignition fusses are good.
View 4 RepliesI have a 1999 Pontiac Grand Am coupe. Over 195,000 miles. Not worried about someone stealing it This past month we have the SECURITY light come on and blink.It's do that 3 times. Two times I remained in the car, with the windows down, while my wife was in a store, with her keys. I have my own, but just sat there reading, no A/C or radio on, According to the manual, it is an anti-theft "feature". When it does the computer shuts off the fuel and the car won't start. It turns over. We have to wait until the light goes off, then it starts. Dealership says they can't disable this "feature". They said it could be ignition switch or computer $$$. What can I do?
View 1 RepliesWhen mother purchased car she wasn't given an alarm fob. She just locks the doors. One day the "Security" light comes on and the car acts like there is a kill switch on it. Can't seem to locate the problem. She purchased it used in another state.
View 7 Replies