Yaris/Scion & Vitz :: Fault Code P1272 - Engine Light On In Dash
Jan 8, 2015
For some time I have engine light on in dash. I bought OBD scan tool and I'm using OBD Auto Doctor.
I had this engine light on for some time. It come on and goes off comes on etc.
So this is the fault - P1272
I didn't find much info about this code. There are two reading about this code. Either it's something to do with fuel pump pressure or something to do with one of the cylinders.
Car Toyota Yaris 1,4D 2006
View 2 Replies
Advertisement
A couple of weeks ago I was driving my 2008 Toyota Yaris and the check engine light came on. Soon after the check engine light came on every dash light started flashing. The Car down shift into second while I was going 55 miles an hour! We took the car into a service center where they said it was the speed sensor which they replaced. We got the car home. I drove it to work the next day and while going to lunch the check engine light came back on! The car seems to be shifting fine though! They mentioned that if the speed sensor didn't fix it, it could be the "cluster"! What the heck is that?
View 4 Replies
I have a 2007 Yaris, 180,000 miles, The check engine light comes on. With a P0011 code. I know that that could mean either:
blocked oil passage
Mechanical timing fault
Camshaft position a timing over advance
Failed OCV
Or VVT controller assembly fault
Since it's been really cold out I figured maybe it was a blocked oil passage, but after an oil change and quick check - I no longer think that's the problem.
The car runs great and it doesn't seem anything is wrong at all ...
View 3 Replies
Recently changed a front pipe manifold on my Echo 2003 4doors Five spd.
Noise I was reporting ealier thread seems to have subsided somehow but I did not hit the high road again, since the repair.
But I have this check engine light that went off 3 days ago and stays on.
Tried 4 times to read the code of OBd II reader and it pulls nothing. As if everything was normal.
I changed the batteries but it acts like it does regularly and it shows like there is no code to pull out.
Could that be a Ghostly Check Engine. It is still on at the moment meaning every time I drive the car.
View 5 Replies
My great 2001 Echo is acting up for the first time in 11yrs!.. This weekend I decided to have my mechanic change the manual transmission fluid and do a general inspection of the vehicle. He found nothing wrong. I decided that before embarking on a long trip, that I would change the oil/filter, flush the radiator and put new antifreeze, change the airfilter, replace the alternator belt, added a small bottle of Lucas complete fuel system and a new battery.
I was proud of my DIY performance except that the next day the engine light came on! I took it to AutoZone where I purchase all the supplies and battery and they came up with CODE P1349 which I researched and found out about VVT(variable valve timing) malfunction. Some of the reasons for this malfunction are: low fuel pressure due to clogged or bad injectors..... Fuel pump regulator....camshaft malfunction or ECU (engine control unit) problem.
1.This morning the light was off then ten or fifteen minutes later it went on and at the same time the iddle got much faster for about two or three minutes, (in other words the engine was running faster even when I took my foot off the accelerator) and then came back to normal.
2. Later on the light was off again followed by the same sequence of events. Then at one point later I could tell that the the engine was running fast again for a couple of minutes.
View 14 Replies
First owner, 192000 miles. Check engine light came on during last winter, I put fuel injector cleaner with gas and it went away for a while. It came back on, if i reset, I can drive for about 50 miles before it comes back on line. Also, may be two or three times a week, when moving after a stop, the vehicle stalls, i have to take the feet of the gas pedal and give gas again.
I called up the dealer asking for fuel filter and fuel injector parts prices. Fuel filter is in the gas tank and not meant to be replaced. The fuel injector I was told 4 x $155 each. For diagnostics they need $100
See attached, I was able to clean sensor 1. I could not unscrew sensor 2, the screw is rusted, plus there is no room to get a longer screw driver and turn.
View 14 Replies
I have a 2003 Toyota Echo 1.5. About a year ago the cel went off and on intermittently and I got a p0511 code. For the past few months, the light has stayed on steadily except for a 2 week period when it stayed off. When the cel is on , the car idles slightly low for about a second just after start up. When the engine is warm, it idles steadily about 400 rpm above normal idle. When the cel is not on, the idle is perfect both at start up and when the engine is warm. I did take off the IAC and cleaned it, but it already looked spotless inside and seemed to operate smoothly.
View 2 Replies
The check engine light has been going on and off for a couple of months. I took it in to be looked at and the mechanic said they couldn't get a code, couldn't get a "good read" on what was wrong. They said I could take the car back (but they couldn't give me an inspection sticker) and drive it for a couple of days and if the light comes on, take it back to them. If the light doesn't come on after a few days, they will give me the sticker. I can't believe my car is going to act any differently than it has for the last few months -- light comes on sometimes, sometimes it doesn't. Shouldn't the mechanic be able to tell what's wrong.
have a 2005 Scion with about 60,000 miles.
View 3 Replies
Every time i put the key in the on position, the check engine light comes on, but not anymore and it wont start, wont make a clicking. Nothing What relay or fuse would this be.
View 3 Replies
In January I had taken my car in for an oil change. About a Month later my check engine light comes on. I pull over and there is no oil cap. Why the light hadn't come on before then is beyond me. I also park on grass so didnt notice it. I took it to advanced auto to see what the code for the light was and it said that the engine was running lean. Is this connected? and if so how? I am driving a 2008 Toyota Yaris Hatchback
View 1 Replies
I just purchased a manual 02 echo coupe with 140k, It has been sitting for over 4 years as it has some type of wiring issue, I replaced the ECM thinking it was that and has the same symptoms. With key "off" the check engine light is on (about half bright) and the blue coolant light (full brightness) Forgot to mention another big problem, When I plug in the scanner there is no communication.
From what the old owner told me, He had a clutch put in it and the battery was installed backwards and it burnt the ECM. I'm thinking he bought the car as is and never got it running.
I read that the power goes through the instrument cluster. I'm going to pick one up from the junkyard tomorrow (off a 2000 manual echo).
Symptoms:
No communication to ECM
Coolant and check engine light stay on when switch is off
No spark at any of the four coils.
Replacement ECU did not fix anything.
I cleaned the three ground points in the engine bay.
I sprayed starting fluid hoping it was a fuel problem.
View 11 Replies
I just got my wife a 2000 Echo with 224,000kms on the odo. Everything appears to be fine other than a mystery rattling noise under light acceleration. If I were to describe it, it sounds as if a box of rocks were to be shaken around. Or like a rattling loose chain... <------ definitely hope it's not that!
From a search, it seems like others have encountered this strange noise but have not reach what the cause is.
From what I gather, the timing chains on these motors are literally never touched and should last the life of the vehicle.
View 1 Replies
I purchased a build Dec 05 1.3l Yaris several months ago. I recently started to get a check engine light, so I did a scan of the computer and it returned a P0012 error. Though multiple searches, I learned that this is likely due to the Camshaft Timing Control Valve Assembly or possibly the OCV filter.
Further searches haven't been able to reveal which parts I need to purchase to replace these items. I can only find details for the 1.5l engine.
The engine is: 2nz-fe, model: ncp90r-agmrkq
1. I don't even know where these parts are located on the car?
2. What part numbers do I need to purchase to replace?
View 2 Replies
The check engine light keeps coming on and off on my 2001 Echo with the above code. The car runs fine and the check engine light randomly comes and goes. What would set off the check engine light, but not cause noticeable change in performance?
View 2 Replies
I have a 2009 Toyota Yaris with water dripping from under dash on passenger side when a/c is on. What it is and how to fix ?
View 1 Replies
My car is a standard and was working fine not indication of any troubles. Stopped and pumped $20 gas. Started to drive and car starts running rough especially at low speeds. Going up hill is brutal. Engine light flash when trying to accelerate, slow getting up to speed, shudders- not a lot of power, once up to speed engine light turn off.
Press the gas to go up hill- engine light comes back on and it begins all over, it also sounds like it is not running on all cylinders.
Is there any suggestions: fuel pump, fuel injection...spark plugs and wires? Something more serious
View 7 Replies
I have a 2009 Yaris and it started acting like it was stalling out. It won't accelerate. It bogs down. Check engine light is on and when tested got a code of P0353. This means the third coil is bad. I did the check but it seemed to be ok.
View 2 Replies
I have a 2002 Toyota Echo. I just purchases a Creader V code scanner. My car is throwing a P0171 code. The light only comes on at idle or while going under 10 mph.
The data from the reader was:
Trouble Code: P0171
Fuel System sta B1 : CL, using HO2S
Calculated Load: 11.76%
Coolant Temp 188.59 degrees
The Freeze frame data was:
ST Fuel B1: -3.91%
LF Fuel B1: 36.7%
Engine speed: 795.5 RPM
Vehicle speed: 0 mph
Intake Air Temp: 82.4 degrees.
I went back today and ran live feed on the O2 sensors. I'm not sure what STF of O2S: STF means. That was another figure displayed on my code scanner.
The O2S S1 was reading between .04 and about .82. The graph looked pretty normal (I guess) in regards to going up and back down between 0 and 1. I don't know alot about mechanics, but I seen a youtube video of a graph showing it going up and down and what is normal. Mine did that on S1.
O2S S1: STF was: 3.89 and -1.57%
O2S: S2 was a different story. It was between like .58 and .66.
The O2S S2: STF didn't give me a value at all. It just said " --% ". The graph of this was slowly going up but in a small range. It started at like maybe .4 and would go up to say .5. The next wave would be like .45 to .55, then .50 to .60, then .58 to .66 etc. So it was not ranging just between 0 and 1. It had a very tight range that gradually increased upwards.
I built my own smoke machine before testing with the code scanner and I didn't get any smoke coming out of the car except for around the air filter housing where the lid meets the bottom portion. I don't know if it's because I had the air filter wrapped in plastic wrap. Can I have an air leak where the filter cartridge connects that would case a lean code P0171? Maybe I should go try to smoke test again. I did it about 3 weeks ago and I can't recall exactly where I had the smoke going into. I thought I disconnected the PVC hose from the brake booster and plugged it in there. I assume the smoke would get thru the whole system. It took about 2 min before the smoke came out of the filter housing.
The car only sets a lean code at idle or going less than 10mph and I'm coasting in a residential area.
I have an inspection coming up in May and need to get this thing fixed before that. I can't find any other air leak, but I wasn't sure a leak around the filter would cause this and I'm not sure the leak wasn't caused by the plastic wrap.
I'm thinking my only other prob could be fuel related. Fuel filter, fuel pump, clogged injector, or can my O2 sensor be bad and causing this? I've already replaced all spark plugs and coils as well as the PVC valve and cleaned the MAF sensor with the appropriate spray.
The car runs ok. The exhaust seems to smell RICH. Like Gas. I don't think my fuel economy is as good as it use to be. It has dropped from as hi as 42 mpg to between 38 and 40 if I'm lucky.
Back when I was having problems before and realized I had a bad coil, I had tried some injector cleaner. Why the codes were back then, but I had erased them and the car ran fine for about 2 months and the light came back.
My MAF sensor was .14 lbs when I was watching the live data above. I plugged my fuel pressure tester directly into the fuel line coming from the fuel tank and got a reading of between 42 and 44 lbs (car not running, just by trying to turn the engine over). I don't know if that is as accurate (or useful) as having the fuel pressure tester on the car and in line to allow the car to start up and run and watch the tester. I have to wait until my part comes do run the test that way.
View 14 Replies
I'm getting error P0125 on my 2001 Echo, which points to possibly a faulty ECT sensor.
Where is this sensor located? Seems like under the air box? Is replacing this part as annoying as it looks? And, are there any other possible causes for code P0125?
In case it's related, I will mention that code P0171 (mixture too lean, I believe) is present as well, and the car does hesitate upon initial acceleration when standing still. Once it's moving, it works fine.
Maybe it's time to start thinking about replacing this car... it has 216,000 miles...
View 1 Replies
2004 echo, 109,000 km. P0301 came up and upon investigation I discovered that my no.1 spark plug well was filled with what I believe to be coolant. The top of the valve cover (where the coil packs are seated) was bone dry. The oil, from what I can see on the dip stick looks ok - I intend to replace to investigate further. Coolant is low. Spark plug wells for cylinders 2 - 4 are ok.
View 8 Replies
I'm trying to remove the tail light units from my 2002 Toyota Yaris.
I've removed the central nut from the inside but the light unit won't budge. There are two other protuberances coming through the metal body work which are a plastic spigot, lower left of the metal bolt, and rubber type insert further away to the upper right.
I'm also presuming that there is some stiction with the gasket.
Even with the nut removed the outside of the unit has zero movement while the inside has a slight amount of flex.
Am I missing something?
View 4 Replies
