Windstar :: 2004 - Mileage Not Showing / Heat Blows On Driver Side
Oct 27, 2015
I have a 2004 Windstar that is nor behaving well. It seems to run ok for the time i have had it. Mileage not showing, error code for cam shaft sensor (It has been replaced), passenger window works intermittently, no display on stereo, Heat blows on drivers side while the AC blows on passenger side, Electric doors work sometimes.
Like i say, it drives ok but won't pass emissions and too many erratic problems to sell it. My independent mechanic thinks its the computer and said take it to ford. Cant afford for them to waste hours shooting down individual problems if they are all related.
View 2 Replies
Advertisement
My wife drives a 2010 Hyundai Elantra with a 5speed manual trans with about 40K mi on it . We purchased the service maintenance package that covers all scheduled major and regular maintenance. A year ago they replaced the head gasket because they discovered a small oil seep. Well a couple of weeks ago I noticed that the heat is fine on the drivers side and blows cool on the passenger side. This is a problem particularly when defrosting the windshield.
When she brought it in for the next scheduled service a couple of days ago I asked that she mention this problem to the service people. Their response was "we need to do a cooling system flush which would not be covered by the service contract" to the tune of a couple a hundred bucks. The coolant is the transparent green it should be due to it being changed one year ago so I have my doubts about it being the heater core.
View 4 Replies
My 2009 silverado ltz is haveing heating issues. when you first start truck all work fine. After a couple min the drivers side vents loose heat and blows cold air. the heat on the pass side works fine. then the vent will change to defrost even though the display still shows its on vent. the only way to get it back is to mess with the vent control. then it will last about a min then back to defrost. at this point i just turn it off. I have already replaced the control panel to no avail ...
View 1 Replies
I have a Buick park avenue 1998, 3.8L V6 engine. the problem is: The ac vent on the driver's side blows cold air but on the passenger side blows EXTREMELY hot air. no matter how cold or hot you set the ac it blows at the same temperature on both sides. Florida heat is setting in and my passengers are melting. I am really hopping that is not something to bad and that I can fix it myself. Tip: this started happening after i had the alternator and the battery replaced.
View 1 Replies
This is a 2004 RX330. Unable to adjust temperature on driver side.
Symptoms - may appear to be defective heat or defective A/C on driver side only (depending on the position of the mix damper).
Solution -- replace mixer damper assembly servo (this controls the mix of hot and cold air on the driver side). This is a dual climate control, so each side has dedicated dampers.
So, if unable to change "where" the air coming out, the damper with the red arrow would require replacement.
If unable to control the temperature, the damper with the blue arrow would require replacement.
I will post pictures, after I repair my own. I'll be replacing the damper with the blue arrow.
This photo was taken with my feet on the drivers head-rest and my head pressing the accelerator.
View 1 Replies
2006 Chevy 2500 Silverado heater blows hot on driver's side and cold on passenger side. None of the controls change the temp. on the passenger side.
View 2 Replies
Bought new oct.2012. Fiirst time used heat blows cold from one side hot from other. not consistent, will vary from left cold, then hot from right or the opposite. been fighting with chrysler from then till now. engineers know problem exists and are working on a fix. haven't found it yet. contacted chrysler numerous times, just get passed from one to another.
View 2 Replies
I have a 2008 Santa Fe Limited. Today I briefly turned the heat on since the outdoor temp was cool. Later in the day, I resumed the A/C AUTO setting at 72 for BOTH sides of upper vent outlets. I soon noticed that the driver's side blows warm air and the passenger side blows cold air as it should. No amount of adjusting the temp control either up or down had any effect on the driver's side except for constant warm air. Now I know the passenger side can be adjusted separately but both sides were set for the same temp. Never had this happen before. Always before, if I wanted warm air, the warm air would come through the floor outlets. What's causing warm air to come out the top driver's side vents when it should be cold? Could a diverter door be stuck?
View 2 Replies
My wife drives a 2010 Hyundai Elantra with a 5 speed manual trans with about 40K mi on it . We purchased the service maintenance package that covers all scheduled major and regular maintenance. A year ago they replaced the head gasket because they discovered a small oil seep. This was covered by the warranty.
Well a couple of weeks ago I noticed that the heat is fine on the drivers side and blows cool on the passenger side. This is a problem particularly when defrosting the windshield. When she brought it in for the next scheduled service a couple of days ago I asked that she mention this problem to the service people.
Their response was "we need to do a cooling system flush which would not be covered by the service contract" to the tune of a couple a hundred bucks. The coolant is the transparent green it should be due to it being changed one year ago so I have my doubts about it being the heater core.
View 3 Replies
Why my air-conditioning only blows cold on the passenger side on the driver's side It barley bows cold most of the time it is warm.
View 3 Replies
I've noticed today on my Camry that no matter what I set the air flow selector to on my heater, air only blows on the floor. Temperature and and fan speed seem to work fine. Going around to some local repair shops I was told the whole dash would need to be removed for a repair.
From what I have read changing the air flow selector I should hear some motor make the change from the floor to the face, but do not hear anything.
View 1 Replies
I have an 06 F-150, there is lots of heat but it only blows on defrost. Is this the blend door motor or is it something else?
View 6 Replies
Either running A/C or heat.. air only blows on the '2' and '4' setting.. so I have middle of the road or WOT when it comes to the amount of air. On the '1' setting nothing comes out and '3' setting is the exact same at the '2' setting. What is going on with this.
View 3 Replies
My drivers window goes up and down good but the auto down does not work. I checked the fuse/relay that is in the box under the hood, drivers side and it looked okay but to be sure I swapped it with the one for the electric seats, same amp and relay and it still does not work.
View 2 Replies
Could this a door open/close sensor? Where is it located?
View 4 Replies
Drivers window not working .. I pulled panel and checked voltage at motor when switch was activated 12.8 volts on this vehicle. Is just the motor changed or the whole window mechanism. If so, what are the steps ...
View 2 Replies
I drive a 2009 Santa Fe with 51000 miles on it. Recently the AC vents on the drivers side blow air that is considerably warmer than the air on the passenger side.
View 7 Replies
2015 GTI autobahn w/pp. Couple of days ago i started to notice that the driver side air vents only blows out cold air even when the car is warmed up.
So I decided to try turning up the temp to hi for both sides, and i notice passenger side is blowing hot air like it supposed to while driver side is not. (this happens with and w/o AC).
This happens maybe 2/3 times i start the car, so I looked up online and seem to only find people complaint about air staying hot when temp set to low w/o AC....
View 1 Replies
Just had the truck in the dealership for a bad blend door/ heater core case. Heat would only blow out warm on the passenger side, blows cold on drivers side. Dealership replaced the case, heat works normal on both sides now. It was a little warm out yesterday so i turned on the A/C, frosty cold on passenger side, warm on drivers side, temperature does change when i select different temperatures (dual zone.)
View 1 Replies
On my 06 GS300 135k my driver and passenger side blows different even though the temp setting is same. I have replaced Driver side Servo motor but no change. When heater setting is at 75, passenger side blows toasty, but driver side is cold. What else do I need to look at possibilities?
View 3 Replies
2002 Windstar A/C problem. Blows cold in the rear but not the front. Blend door actuator in the front is operating properly. Compressor cycles on and off but not excessively. When temp levers in full warm air blows to floor but it is not warm. Compressor runs even when the A/C on/off switch is in the off position. Indicator light is off but compressor still runs. Condensate puddles on floor in rear but none in front under vehicle.
View 8 Replies