I was working on my shifter interlock and got a text message that says " gear selector reduced function" fixed the problem but cannot clear the text tried to clear with my code scanner no avail....
View 1 RepliesWhile my wife was re-parking my 2007 S60 this morning (currently at 73,143 miles), the error message "Reduced engine performance" came up.
She had switched-off the engine before calling me on the phone to report it, else i would have told her to rev the engine to see how far the rpm gauge could go.
While checking through the error on google, noticed there were several complaints on this in the past but could not see any inferences on what was done to resolve this except for guys who mentioned repeated visit to dealership.
When she switched-on the engine again, the error message didn't come up and she could rev the engine up to 6500rpm, i intend using the car for a long journey next week and do not want any breakdowns.
I bought some long beams at the local lumber yard. So drove home with the rear cargo door open. The ABS light went on brakes were pulsing mildly and making an odd sound. I cant see why the rear cargo door would have any connection with the ABS system so I assume that's a coincidence.I took the van to the local car store they scanned the code. It scanned code 4 indicating the passenger front sensor. I replaced the sensor but the ABS light is still on. Is there a reset function to clear the code disconnecting the battery didn't work? Or am I looking at another component failure?
View 2 RepliesWhen I park my car and shift the selector into "P" the car will not allow me to remove the key until I jiggle the selector. I get a "please shift the selector into P"
After it's jiggled it unlocks, and I can then remove the key. I would prefer to fix it myself, rather than take it to the dealership.
What does it mean when the PRND2 area all illuminated at the same time? Normally only the gear selected will be illuminated, but yesteday I got a solid bar illuminating all the gear selections. Couldn't find any reference to it in the manual. Shut the car off and restarted and the problem went away.
View 24 RepliesI am Having a problem on my 2005 Phaeton which has a 3.2 engine. Last time I drove it was yesterday and had no problems. This morning, I'd turn the key and it give me various error message."Move selector lever to position P/N" ...
I tried to move it but with no luck , the message is still there and I also noticed that the light on the shift that indicates that I need to press on the break to start is not glowing. This is not the 1st time I had this error but before I had to leave it for a while and it will start ...
I really love my Phaeton and it has only 75,774 kilometres on , so it is quite new ...
You can see the error message and the light indication below in the pictures ....
Today when I head home I was getting the message "Move Selector Lever to Position P." It would come and go. No other lights or warning what so ever were lit. What this message was for and why it was displaying??
View 6 RepliesDealer forgot to reset oil life warning oil change. I cleared it in the "settings" but then "oil filter" and "fuel filter" warnings came in and won't clear. How do I get rid of them?
View 3 Replies2004 S60 Suddenly lost a lot of power while driving (non-highway) and the Reduced Engine Performance" warning appeared. Depressing the gas pedal gave it only minimal power and the engine would not shift. Even in park, depressing the gas pedal would not rev the engine. Turning the car off and on produced the same warning message.
After overnight inactivity, the car started fine, but the Engine Service Required warning light was on. The car was towed and inspected at a Volvo service facility.
The reduction in engine performance could not be duplicated. A computer upgrade was performed and the Service Engine light cleared. They could not find anything else and said if it happened again to bring it in.
I believe this is a safety issue, since losing power mid road can be dangerous on the highway.
I have a 2003 Tahoe that I love but is driving me crazy with a "Reduced Engine Power" message. I am driving along and suddenly it dings at me, the message center says "reduced engine power" and I am losing speed. It goes into a "limp mode" in which I cannot accelerate, it cannot pull itself up a hill, and the engine misses badly. I can pull over, shut it off for a couple of minutes and then start it up and run again just fine until it decides to do it again.
There seems to be no rhyme or reason, one day it did it 4 times w/n the first 20 miles, then ran 100 miles w/o doing it at all. I recently took it on a trip that normally takes me 1 1/2 hours, it took 2 1/4 hrs that day because I had to pull over so many times. I was having to stop every 3-4 miles by the time I got there. My usual mechanic has completely given up, told me to trade it. I have had it to another mechanic for over a month now, 3 times he has thought it was fixed, but it wasn't. One time, I didn't even make it the 5 miles to my house before it acted up again.
One other note on this: this past trip I made, I left early in the morning and my lights were flickering high/low. . . this went on for several miles. Finally my lights quit flickering, then I lost engine power, pulled over, shut it off. When I started it back up, the lights started flickering again. The cycle seemed to continue, once the lights would settle, the engine would lose power. I took it to a parts store and had the battery and alternator checked. They said both were fine. (Had never noticed the light thing before, but I can't think of a recent trip after dark.) How I can pass along to my mechanic?
I recently purchased a Prius 3 - Solar Roof package -In the navi manual page 154, "Bluetooth Phone Message Function" - this feature does not show up in my car. I have the iphone4s, I am missing the feature with the phone synced and not synched.
View 2 RepliesI figured out how to get the text message function to work on my head unit. It was a setting on my iPhone, under Bluetooth it was the "show notifications". Then all of a sudden bam any texts I get while in the car pop up and the HU will read them aloud, also there are a bunch of quick responses.
View 16 RepliesI have seen this pop up on the truck I think 3 times now over the first 4000 miles on the truck.
Usually it's when I'm on the highway around 70mph or so.
It comes on for a few seconds, then goes away. I do have an exhaust / tune on the car.
I haven't had any issues with this truck before but last night I pulled out onto the highway and my check engine light came on and a message saying engine power reduced I finally got it to reset after 4 times of shutting the truck off, was wondering what this may be without knowing the code. I tried plugging my edge cts into it from my 6.0 but it wouldn't communicate guess it needs a update trucks a 15 f350 with only 30000km.....
View 2 RepliesSo I just went on a vacation pulling my horse trailer (first time leaving the state with this truck) and at about 5 hrs into the trip I had a message Reduced Engine Power and went from 70 on the interstate to 10 miles an hour and slowing rather quickly. I ended up shutting it off and restarting and it came back just like normal. I found the nearest ford dealer and they put the computer on it and it showed absolutely nothing, no codes and nothing wrong. The mechanic reset some things and we went on our way.
Then I ended up getting a check engine light saturday. I found someone to read the code and it came up with P164A which is an O2 sensor, he was able to clear it and I put on probably 50 miles today and no check engine light. I have about a 10 hour drive back home. Still debating if I take it to ford near here if they will do anything now that it doesn't show a light?? I hate to chance getting broke down on the highway with a truck that will basically shut down like that?? It just doesn't make sense to me.
I have a 2011 Ford F250 6.7 Powerstroke. It has 107,000 miles on it.
The other day I was driving it down the highway and it got a Reduced Engine Power message on the dash. It lost power and I got off the highway to the service road. Then it died on me.
Had to get it pushed to a station then towed home. It wouldn't start. The starter cranks over for a few seconds but engine won't start. Checked all the fluid levels and batteries. My DEF fluid was only a half gallon low.
What I have noticed is that the DEF level indicator hasn't reminded me that it was low for over 4-5 months now. I had been putting in about 2-3 gallons every 3 months or so. But it hasn't reminded me lately and I just forgot. This is my first diesel.
2015 F350 6.7L, 43,000miles
My family and I were driving into West Virginia this morning when the reduced engine power message came up on the dash and the truck died. I coasted off to the side of the road as best I could and got out. Immediately I smell diesel fuel. I look under the truck and there is fuel all over the passengers side frame and when I keyed it back up fuel started spraying down by the right front wheel.
Pulled the fender liner back and saw a small rubber hose that looks like it came off of a tee fitting down by the egr components. I tried to get it back on but wasn't able to get it seated 100% and when I tried to restart it blew off again. Truck is completely stock and ran perfect right up until it died.
Got my car back from the dealership today, new DSG in, but already have it on jack stands trying to figure out how to adjust the gear selector. Feels sloppy going from park to reverse. When in reverse, it very easily slips into neutral. If you hold down the lock button on the shifter and go from P to S and then back, there is very little resistance between the different positions.
I see what I think is the shifter cable under the car below the turbo area coming through the firewall, but how to adjust this on a DSG.
With my '04 V8, recently on my dashboard the selector gears light-up entirely, where as typically just the selected gear is highlighted with the orange box when operating. Make sense? P, R, N & D all are highligthed in the orange color.
It does this inconsistently in both automatic and tiptronic. Just last year I started using the vehicle to pull our pop up camper. No problems last year and it pulls fine. Two weeks ago on our first weekend out camping, using the tiptronic I noticed that all speeds where highlighted.
Sound I be concerned about this? I called local dealer, they had no clue. I called VW and they said take it to a dealer. The vehicle seems to be operating just fine.
This past Sat, when I started the car in the morning, noticed that the Gear selector indicator in the MFD is stuck. The display background is reversed and moving gears does not change the display, in the regular or sports mode. When I go from P to R (or D), I occasionally have a jerk. I drove the car car a bit since and no other apparent issues. It is a Triptronic.
View 6 RepliesI have a 2001 Ford Excursion with the 5.4 and auto trans. I don't know for sure what specific tranny is in it but I do know what I want to do. I really like the pistol grip style shifters that a 2004 ish F-150 has and I wanted to make that conversion in my Excursion. Is it possible? Are the trannys the same to where I can switch out the gear selectors? And also how would I even do it?
View 7 Replies