I removed the front seat belts from the seat base on my 1987, 740 to remove the front seats for cleaning and fabric repair. When I went to install the reel that attaches to the seats, they would not unwind.
View 2 RepliesThe rear seat belts in my wife's 2001 Civic EX are annoying, but I don't know if this is abnormal, and can be fixed, or just something we have to live with. Basically, the seat belts frequently grab you and won't let go, so you can't lean forward, for instance. You have to unlatch them and start over.
When I test the belts without latching them, I pull them out a long way and let them retract over and over, and then at some point they grab and I can't pull them out again without letting them retract all the way back to the beginning. I can hear that the ratchet is engaged when this is happening.
During the time when they do pull out and retract with no problem, if I give a sharp tug, they grab, like they're designed to do, and then let go.
I guess this feature is standard in newer cars, but how to turn off that annoying beeper for seat belts and keys in the ignition? Perhaps there's a wire that can be cut.
After all, I know enough to buckle my seat belt and feel uncomfortable and unsafe if I do not. I don't need to be beeped at to remind me. Plus, I know when I leave the keys in the ignition and exit the car.
I have to say that I was very worried when I did this. I downloaded the app, it scanned the car, took me to the Carita pro for 20 dollars link.
View 4 RepliesThey work and no problems latching up. But they "lock" up real quick. Kids almost always get locked to the seat.
View 7 RepliesThe passenger seat belts on my 2011 do not 'give' a little. When someone shifts in their seat, the belt tightens up (allowing little to no movement)...almost to the point of being uncomfortable. Is this normal/expected behavior? Or do I need to have them looked at?
View 1 RepliesThe seat belts in a Subaru WRX have been replaced with 4 Point Racing Harnesses. The air bag light now stays on. Does this mean the air bags are inoperable or will they still deploy in case of an accident?
View 2 RepliesI have an '05 package 2 and I am replacing the steering wheel. I found that I need to disconnect the battery to replace the airbag, I also read that it is a good idea to remove the SRS relay. Which one is the relay under the hood? additionally I am trying to remove the seatbelts to clean them how do you remove the paneling without breaking the plastic?
View 1 RepliesToday I was on a highway traveling at 60 miles an hour. There were no cars in front or on either side and nothing on the road. My foot was on the accelerator and not on the brake. Suddenly the seat belts pulled very tight (I believe that is called "pre-tensioning") and the brakes slammed on without any input from me. The car rapidly decelerated to about 30 miles an hour. Fortunately there was nobody tailgating me. After that everything seemed OK. My vehicle is a 2013 Prius v (lowercase v for the Prius v wagon) model 5 which has the technology package.
I took the car to the dealer and they checked the collision avoidance system and said they could not find a problem. The service manager said he has a Camry and it has happened to him once. They had never heard of it happening on a Prius. Apparently Toyota has a bulletin about this for the Camry, but not the Prius. They suggested I turn off the Collision Avoidance System with a switch that is under the dash.
I am not sure whether to turn it off because if I do I lose the adaptive cruise control and collision avoidance, If I leave it on this can happen again possibly causing an accident.
Took the car to the dealer, said "just turn off the beeps, all of them." The rep. said come back in an hour. Most of the beeps are off now, but I have an odd pair of problems.
1.) The rear hatch no longer beeps when open, but it also has no longer has the SKS function.
2.) The front seat belts no longer beep, but the front dome light no longer has an on-when-door-is-open function.
3) I'm waiting to see what bizarre side effects come from the single reverse beep.
The rep. says these are side effects from killing the beeps, that the nuisance beeps are tied to these two functions and that the only way to restore them is to bring back the beeps. He claims that the front beeps & dome light are triggered by a sensor inside the door that is part of the door latch, that when this sensor is disabled all its functions stop. I think he said it's the same problem with the rear hatch and its SKS.
Four or five years ago, our 2001 Toyota Camry (and my wife and I) had the misfortune of being in a T-bone accident when someone unexpectedly pulled a left turn in front of us and gave us no time to stop. We had the car front-end repaired at a collision repair center, and we were good to go, I thought. As I drove away, I noticed the newly replaced seat belts seemed to "lock" in place at times. They did lock at a sudden stop, as expected, but when entering the car and attempting to put on the seat belts, they would sometimes lock and release, causing me a repeated tug-of-war as I attempted to get enough slack to fasten the belt. This occurred on both the driver and passenger front belts.
Needless to say, I returned the car to the shop, and they cheerfully replaced the belts a second time. When I picked up the car, I first tested the belts, which seemed to perform flawlessly, so I drove home. My joy was short-lived, however, because on the way home, the locking problem returned. I returned to the collision repair shop yet again, and they replaced the belts a third time. The shop foreman personally tested the belts to make sure they worked, and he watched as I did the same. However, yet again, on the way home, the belts would lock unexpectedly.
Through much experimentation, I finally realized that if the car was facing any degree of a downward angle, I could pull the belts very easily and smoothly, yet they locked if I jerked the belts hard. This was as expected. If the car was level or facing an upward angle, however, pulling smoothly on the belt would result in them locking. This seemed very odd to me, and I mentioned it to the collision foreman. He immediately called Toyota to ask about it, and they had never heard of such a symptom.
So, for the past five years, I have been enduring the craziness of getting in my car and doing a repeated pull "negotiation" with the seat belt. I have also noticed that when I begin driving forward, if I will apply the brakes gently, both myself and any passenger can then easily pull the belts and fasten them while the gradual braking is occurring. It doesn't seem to be a safety issue because they do lock on a sudden hard stop, but it is counter-intuitive to me that a gradual braking allows the belts to move freely. Is it possible they could have installed the belts upside down or backwards, or something?
See my sig for truck.
I have 3 kids in the crewcab. 2 are in booster seats, and 1 still riding in a Britax. The 2 in booster seats can buckle their own seat belts in the wife's Odyssey. But they cannot buckle their own in the truck because as they try to push the 2 pieces together, the short 'female' end slides down between the seat and seatback. So I have to buckle them. Every time.
Anything to prevent the female end from sliding down? I'm thinking maybe putting a ~4" long 1-2" diameter piece of tubing around the belts. Something like that.
The timing belt broke on my aveo, destroying the engine. I replaced the engine with a used one. Now I get the car back on the road and the automatic transmission won't shift from 3rd gear into 4th. Is it possible this problem was caused when the new engine was installed, or the transmission was damaged when the timing belt broke?
View 4 RepliesI've got my sister's 1995 Dodge Neon with the 2.0L SOHC. While driving it recently I heard a horrible squeaking noise then a ZZZZZZzzzzzz sound. I immediately pulled over. The check engine light came on, and I shut the car off. Coolant was all over the place leading me to believe the water pump failed. I had it towed to my house, and now I will have it towed to the shop to get fixed. I would like to have them repair the timing belt and water pump. However, I am afraid that the valves were beaten to a pulp and now I will need a new engine. I was only going 35 mph when it happened. What are the odds that my valves were smashed up, and is there anything I can do to check them before I pay for a timing belt/water pump repair?
View 19 RepliesI brought my 2004 VW Touareg V6(83k miles) to the dealer for a recall on the ignition call and much to my surprise, was presented with a diagnosis of a $6,000 problem! The dealer told me that the computer read some codes which say that the timing chain is stretched and needs to be replaced. They said it will take 4-5 days and should be done asap so it doesn't "go out", because if it does, it's an even more expensive problem. I took the car to another VW repair shop and they asked me if I heard any noised when I start it cold (like pebbles in a bucket). I have not had any problems like that at all, so they said I shouldn't worry until I start getting symptoms. They also said there is no recommended point (like 90,000 miles) when VW recommends the change, so it really shouldn't be a common problem. I want to do the right thing, but I don't want to rush into an expensive repair if it isn't necessary.
View 1 RepliesI have a 2007 S60. Other day my wife was driving when the driver's seat started moving all by itself - moved all the way forward and stopped which was very frightening while you are doing 110 kmh! Nothing caught in the switches on the side, switches were not wet (shorting). I took it out later but nothing happened until I got out, locked the door and watched as the seat started to move and again did not stop until it was all the way forward! Lucky I wasn't driving - I'm 6'3" and it would have been very uncomfortable. I moved it back, locked 'er up and by the time I got back to the car 30 minutes late, it had happened all over again.
View 1 RepliesI've just bought a 2005 XC90 and one of the rear (3rd row) seats is jammed in the uprigh position and will not fold down. The problem is that the lever does not release the base of the seat to slide back.
I have tried poking my fingers in and have examined the side that is working to see how the mechanism works. It would appear that the catches at each side that hold the base of the seat in position do not swivel around enough when the lever is lifted up. I have tried lifting the lever as far as I dare but I'm worried that if I try any harder something will break.
The driver's seatbelt no longer retracts. I took it to my dealer and they want $585 to replace it. I can pick up a used one for $65. If I can figure out how to get the door pillar trim off can I replace this seatbelt or is it incorporated into the airbag system and requires special munitions skills?
View 6 RepliesI turned on the seat warmer of my 2004 XC70 (bought new) and I smelled a burning electrical/chemical smell, then within moments I felt my leg burning. I turned off the seat warmer and my seat remained scorching. I completed my short drive to drop my son off at school, windows open and left leg off of the seat, and when parked realized that the mechanism had caught fire and cinged a 2" burn mark on my seat as well as puckered the surrounding area of my leather seats. The smell remains to remind me of this very scary drive which could have been simply tragic.
View 5 Replies2011 Volvo XC70. I'm hearing a popping sound similar to a plastic bottle popping coming somewhere from the back seat of my Volvo XC70. This usually occurs while driving a few miles after first starting the vehicle and happens only once. We've check the car for any plastic bottles that may have been lodged under the seat or inside the car and no bottles were found. Where this sound is coming from. There seems to be no mechanical problems associated with it, just this popping sound which is quite loud.
View 1 RepliesWhat are the correct timing marks and positions for a Volvo 940 Turbo? I especially need the position of the crankshaft pulley. I have read the timing mark is on the cover, but unfortunately mine has dry rotted and crumbled away.
View 1 Replies