Volvo :: 1992 - Bulb Out Dashboard Indicator Came On
Sep 4, 2008
My "bulb out" dashboard indicator came on and after checking all lights I could not find a burnt out bulb. I took the car to the local dealer and they told me the "bulb failure relay" was bad and needed replacing. I decided to try and replace it myself but so far I'm not doing to good.
I found this picture on another website and also read that the realy is permantly mounted to the relay board. Also, when I looked at pictures of the replacement relay they lok nothing like the original.
So now I'm wondering how the heck do you take the old relay out and get the new one in that doesn't at all look like the original?
Attached File(s) : RelayPanel760960A.gif ( 31.06K )
View 9 Replies
Advertisement
Daughter just called (2010 Prius) and said that someone told her that a headlamp is out. Is there not a bulb failure indicator on the dashboard?
View 19 Replies
Driving tonight turn on headlights, I can see they are on but the little light bulb to indicate they are on on the display doesn't show.
View 4 Replies
The little mark on the control knob to select air flow is unlit at night with the headlights on in my 2007 Camry LE. Apparently there is a bulb in there somewhere which needs to be replaced. How to change that bulb and get an indicator at night so that I can position the knob in the correct position?
View 1 Replies
I have been to the dealer 3 times so far because of something to do with the lighting system. The MFD says "AFS Inoperative" and the indicator light flashes for bulb failure or malfunction in the adaptive front lights system.
The dealer has replaced a bulb and power module thus far, but it hasn't fixed the malfunction. The indicator light and warning comes on 4 out of 5 times I drive the car and usually within the first few minutes of driving. It occurs with our without the lights on.
The lights do work at all times, but I don't think the adaptive steering/lighting is working when the error occurs.
View 6 Replies
Just bought a 2005 accent yesterday. I new the bulb was gone, when I lifted the bottom noticed that the battery is so close to the lights I can't get my hand down there. Do I need to remove my battery to replace this bulb? Also what is the model # of the bulb?
View 2 Replies
For several months I would intermittently get a message saying "Bulb failure, Low beam". It would go off and not reappear for a few weeks and then it got to where the message would come on and after a few hours it would go off and then reappear a few days later. Since the time frame was getting shorter and shorter between message appearances I decided it needed to be looked at.
The Volvo dealer just replaced the light bulb. After about a week, the message reappeared.
Long story short, I had the right headlight ballast (headlight igniter) replaced and a new ($230.00) right side Xenon bulb replaced. Neither of these actions has corrected the problem, although the mechanic that did the work said he did a scan on all systems and everything in the car was in good shape. I left his shop and about 6 blocks down the street, the message reappeared.
View 4 Replies
So I just replaced the timing belt, water pump, power steering pressure line and all associated seals and gaskets including the oil pan gasket and valve cover gasket. I fired the car up and everything appeared to be fine so I decided the next step was a nice little drive just to make sure all was well.
Everything checked out until I was a couple hundred feet from my driveway when I stopped to talk to a neighbor the oil pressure light started to flicker on and off, occasionally it stayed on for a second or two. when I accelerate the light goes away. I have not put a pressure gauge on it yet.
For example lets just say the pressure is good??? then what??? and the oil pressure switch is brand new. the oil pump passed the inspection listed in the manual and the only thing I did that it didn't tell me to was assemble the oil pump with some assembly lube after changing the shaft seal and housing gasket.
View 6 Replies
I have an 88 244 dl. I recently changed the battery charge bulb in the instrument cluster and no I have a no start. The starter engages and the motor turns over but makes no attempt to start. I checked all the fuses including the 25 amp fuse under the hood.
View 2 Replies
My car dash board will start up when i turn over the key but thats all it will do i dont even get the sound like its about to start it was just working yesterday what do i check...
Honda civic lx 1992
View 9 Replies
Is there a headlight indicator on the dashboard? I do not see one (if my headlights are on, some kind of lighted indicator).
View 1 Replies
I own a 1992 Volvo 240 and most of my speakers are blown. I want to get new speakers (all 4 of them) but I don't want some old salvaged Volvo 240 speakers. I want to buy some nice new speakers. I'm new when it comes to anything involving changing something in a car, so what speakers will fit and easily take place of those speakers where I won't have to do any unnecessary cutting or modify in order to get them to fit (I don't want holes also).
View 19 Replies
Car has begun to idle very fast ( comes and goes ) ( 1992 240 ) ....
View 2 Replies
I just picked up this old 240 wagon with 230k miles on it for next to nothing due to a transmission issue. It stays stuck in 1st gear for about the first 15 minutes of drive time and then starts shifting perfectly after that. I took it to a transmission specialist and he thought the valve body may be sticking. I also had an experienced volvo tech adjust the kick down cable but so far its still having the same issue.
View 5 Replies
I have recently installed a pair of HELLA LED tail lights for my MKV R32 and there is a yellow indicator light showing in my dashboard telling me that both my tail lights are not working, but they are working.
View 9 Replies
I have no owners manual and cannot determine the meaning of this light indicator on my dashboard. It resembles a letter "U" more horseshape with the exclamation point in the middle of the U. How to determine the problem that this light indicates? BTW, I have been driving my car and concerned that continuing will damage.
View 11 Replies
while driving outside temperature indicator went down to 25 (its about 70 outside) 5 min after my dashboard went blank.? Car is running fine, radio works.. (its 06, 2.0T)
View 4 Replies
1992 240. A couple days ago, the car started fine, but immediately started running erratically, feeling like it was about to stall out at lower speeds and then, whenever I gave it a lot of gas, it would stall out or nearly stall out.
Then, after about 5 minutes of driving and then stopping the car, it took about 15-20 seconds of turning over to start. After 10-15 minutes of driving, all seemed fine and it started totally fine after that a little later that day. Next day, same issue takes a lot to start, stalls when I press down on the gas a lot/suddenly from low gear.
Not sure if it has anything to do with it, but we live in Los Angeles and it's just now started to get "cold", with our first chilly day same day this started happening, on Monday.
Not sure if it's the air intake or a fuel injection issue....
View 1 Replies
Have swapped the following parts from my 92 240 into my 93 240 without any change in my stalling issue:
AMM, coil, ignition module, fuel relay, spun all fuses and checked hose between throttle body and AMM for holes.
Was super hot in NM today and after driving the car about 1/2 an hour it stalled and would not restart until it cooled off for about 20 minutes.
It doesn't seem to matter what level the fuel tank is. Stalled the other day when it was full.
View 7 Replies
I own a 1992 Volvo 740 wagon, non-turbo. Super solid car up until a month ago when it developed a grinding sound and vibration when slowing down from 15-0 mph. There is no noise or pulsating at any other speed when I apply the brakes. This happens with tranny in N or D. I replaced the front rotors and pads about a month before this started happening.
I suspected the rear brakes so I also replaced the rotors and pads but I was still getting that grinding/ vibration. The next thing was to replace the hub/bearing assembly, I only did the drivers side because I banged it up pretty bad when replacing the rotors. This also had no effect on the grinding. I also noticed that when driving at moderate to fast speed I hear a humming noise, almost like big truck tires make. This is especially noticeable when letting off the gas and coasting. Could this be a tranny issue?
View 3 Replies
My dashboard turns off . I have it disassembled and redo all welds. But nothing changed. However, disconnecting some lamps, it light on . Do you think that can come from L4925N ?
View 1 Replies
