I have an 06 Trailblazer with power seats. Moved the pass. seat up to fit something in the back. When went to put seat back into position it would not move back. The reclining function on the seat back is working. Is it unheard of for the seat motor to go bad or is it possibly just off track, or something?
View 2 RepliesI have a problem on my 2009 Lexus ES 350, this morning I found out the passenger side power seat is not moving at all in any directions (up, down, front, back etc.) However the driver's side is working. It was working in the past, but I would not know for how long it has stopped working as I don't normally press the buttons on the passenger side except when I want to clean the car.
I tried going through the owners manual to check if it is a blown fuse, but on opening the hood the fuse referred to as Power seat fuse is big fuse that cannot be pulled, also checked the one under the steering compartment, I could not find it either as from the manual it is not a regular fuse either. On second thought I was thinking if it a blown fuse both seats should not be working except they are wired separately (I don't know, just a guess).
My passenger seat will recline but will not move back upright. All other seat electrics work fine just cannot get the seat to move upwards anymore.
VW Touareg 2007 V6 passenger electric seat problem....
I have 2005 Nissan Altima which I bought when nissan did an overall makeover. It has 102k miles on it. Offlate I am observing that when the car is shifting gears (automatic), I hear kind of some fluid moving through near the front passenger seat. I looked under the seat and the searched the whole car to see if there is a half empty water bottle thats making the sound. I dont see it though. Am I looking at some problem?
View 6 RepliesI have a 2006 Camry and the front driver seat is making a rubbing/friction noise when moving it forward and backward- mainly in the back half track, and of course it is worse when sitting on the seat.
I checked closely and it seams that the seat has a little wiggle side to side when moving on the track. Not sure if this is normal (the wiggle) and if it just needs lubrication, or a track adjustment? It started last week and sounded worse yesterday when sitting on it.
The motor and all other seat functions work/sound fine.
While this is not for my Touraeg but my 2006 Passat, I cannot get the seat to adjust. It keeps moving back to some default position.
View 2 RepliesSo It's been a while since I've noticed this wearing rusty sound when moving the driver seat forward and back. It only happens at a certain point where I feel most of my family members are positioned when driving.... I took a look it seemed a bit rusted... Will post pics later.
View 3 RepliesMy driver seat has started moving on its own, sliding back and reclining. 1 have a 2008 Azera, 45,000 mi
View 4 RepliesI was installing the driver's side oem storage drawer and started by removing the 4 bolts that mount the rails to the car. While I was removing the seat rails, my outboard rail somehow slid all the way back and now seems "locked" into position. Basically, the inboard seat rail wants to slide when I lift the lever, however, the outboard seems to be caught and won't move. From the outboard rail perspective, the seat is all the way forward and will not shift back at all. How to deal with this? The pins that move down into the rail to hold the seat in place aren't what is holding it up. My guess is the edge of something in the track is catching.
View 4 Replies135 plus pound passenger with seat belt on. Was intermittent on/off with passenger but now seems always off (off light 'on' ) meaning the passenger airbag is disabled.
I know the es350 was so bad like this that there was a threat of class action. I've read the weight sensor is in the passenger seat rail and you can also do a calibration with a scan tool.
1993 with 95,XXX miles. Driver's seat has developed a little looseness that allows it to rock just a little. Is there a reasonable fix?
View 3 RepliesMy passenger side window is moving like a snail.
I tried both, the button on the driver side, and the one on the passenger side, and I get the same result. I also tried pulling on the door to give it more space, so it's not that it has too much pressure on it from the door. My car only has 27,000 miles on it, so the motor shouldn't be going out already. But I guess it's possible.
I'm pretty sure it's always been slower than the driver side window, but between today and yesterday, I noticed it's been getting dramatically slower every time I use it. I'm kinda' afraid to push the button to take it down now.
My aunt somehow managed to drop coins that landed on/in the driver's seat track. How would I be able to remove the coins? Also, are there any electric wires I should know of before beginning the process?
View 2 Replies2005 Jetta, passenger side window has been falling out of it's track for the past several months. Sometimes a pothole bump is enough to drop it into the door, and if I roll it up all the way, it is unable to be rolled down again unless I squeeze both sides of the window and realign it. if I leave it even a cm less than fully up, it stays on track somehow...
I've read that this is semi-common in Jetta's of this year, and that it's due to a "window clip" that made out of some cheap plastic snapping. I've called pep boy's and NAPA auto parts near me (MA) and both said they don't carry that sort of thing and I need to go to a dealer. The dealers tell me that they won't sell the plastic piece alone, and that I must basically buy the full new module (glass, track, clips, and all the other stuff that I don't need).
Where I might be able to get only the cheap plastic piece by itself, or how I can fix the problem without spending hundreds on a entirely new system?
I've 2007 Chevrolet Trailblazer, around a month ago the front Windshield Wipers started to start on their own, when I got the car checked the technician told me that I've to replace the Windshield Wiper Motor, I wonder if this is correct? and what would make the motor to starts on its own?
View 11 RepliesMy wife had complained the seat would not go forward. Today I was looking for something under the seat. It went all the way back but will not go forward. Also up and down does not work.. Am I screwed or might this be a fuse? Strange, I would have thought the Driver seat would have failed first.
View 2 RepliesMy 1998 T&C has a problem where the front passenger window keeps falling off the track (caused by hard slamming of the door).
I've gone into the door multiple times to pop the rear-most peg back into the white plastic window track "dog", but it keeps popping out after moderate door slams. Do the black pegs that are glued to the window wear out? (I think they're metal).
I think the plastic track dog is fine, and I make sure the metal clip is fully engaged with the window peg each time I pop it back in. The only reason I can come up with for this problem is that the window peg is worn down and has lost its "edge" and thus the metal clips can no longer retain it. Sound reasonable? Probably need a new window from junkyard correct?
I have an 06 Azera LTD with about 40k on it. Recently the passenger power seat stopped working. Only going forward, all other directions work. Now the seat is all the way back with no way to move it up. Can't be a fuse, but maybe a loose connection?
View 4 RepliesHere's the situation. When my wife sits in the passengers seat, the "Passenger air bag off" light comes on half the time. It will turn off half of the time (meaning the air bag is on) but the other half of the time the light is on. It turns right off when I sit in the passengers side and stays off, the problem is only when she sits there.
I've had the recall fix on the passengers side seat done already, (before, the light was always on). I don't think it's her size either, she's 5'8" so it's not like she's too small. She's tried sitting in different positions, but we can't figure out what's doing it.
Yesterday my passenger front window popped out of it's track. Then when we tried to pop it back in and get it to go back up, it completely popped out and up about 3 inches from the frame of the door. Enough to be able to fit a had through no problem.
I am taking the car in tomorrow to have it looked at and get a quote to fix. From what I've read, it's a super pricey fix. So bummed because I just bought the car about 6 weeks ago (if that) ...
Looking for photos where the A/C drain tube is located for accent 2008? Water is spilling inside my car and i think the a/c drain is clogged.
View 1 Replies